HotSpring Spa Delivery | Envoy |

Подписаться 3,7 тыс.

Просмотров 48 тыс.

50% 1

This week we invite you back to follow us on a delivery for a HotSpring spa (model: Envoy).
The crew is delivering a Hotspring spa to a customer in Jackson County, Kentucky. HotSpring spas have been around for over 40 years and are referred to as the BMW of the Spa industry; they are actually designed by car maker VW.
Check out the Details in the Link Below:
www.americanpoolandspaky.com/...
Website: americanpoolandspaky.com/
Facebook: / americanpoolandspaky
Instagram:
/ americanpoolandspa_ric...

Опубликовано:

14 ноя 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@reed311 2 года назад

Interesting. I have a Hot Spring and the pre-delivery instructions from the manufacturer specifically state that the hot tub must not be shimmed in any way. I made sure the pad I created was perfectly level so that I didn't need to use shims and possibly void the warranty.

@michaelantoniotti2738 7 месяцев назад

Thermal Spa has the same cover and lift with the preset screws. Installed in 2021

@wanaraz 3 года назад

I would have moved the spa out towards the grass more but still on the concrete That way you have a walkway and access to that side for repairs. And there will be repairs.

@RazorRamon91 3 года назад

This is one of the only videos I could find to see how the electrical actually goes into the tub (through the mesh screen that is hidden by the door). Thank you!! Have been trying to sort out how this would work as we just ran conduit under a new patio we had laid for our Hot Spring Flair tub that is coming in a few months. Excellent video!

@micah2321 3 года назад

The flair will have a cutout on the wood footplate that the conduit is meant to come up through, slightly different to what you see here. You may have to botch out the door to allow for it to sit flush against the tub, otherwise you will run into rodent invasions through the gap caused by the conduit holding the door away from the framing of the tub.

@sturgeda73 2 года назад

Did you end up running the electrical in through the bottom? We are having ours delivered in May, and had hoped to do that but I don't think its possible now.

@RazorRamon91 2 года назад

@@sturgeda73 yes we did, we managed to run some electrical conduit right before the paver company laid down the stones. It came out super clean and the cover on the hot tub and the steps leading to the tub completely cover the pipe coming up from the ground. We had to just do our best estimate for placement of the conduit and then butt the tub up against it when they delivered.

@brianschindleredits4520 3 года назад

When you mount the hotub cover can the buyer/ costumer choose the wall the cover goes on or does it have a ore built mount on it?

@webgamersjames502 5 лет назад

Tub and Frame is wood free to allow no chance for rot over time but wood shims are used for leveling it up on the concrete. Hopefully it was PT.

@wanaraz 3 года назад

After the first wet year that plywood will not fair well.

@BIGWOOD3160 3 года назад

We call the Spa Dolly BIG RED it's a pain to set up breakdown and it's so long not good in tight spots

@mikemoore6427 4 года назад

this tub measures 91 inches.....then you add 15 inches for top when open and folded over and resting on side of tub....making a need for 106 inches. When the top swings open and away from tub would it need yet more clearance (more than 106 inches) before it comes to rest at 106 inches ?

@AmericanPoolandSpaKY 4 года назад

Hey Mike, you're correct. You would need more than 15 inches for the cover cradle to work properly. We always give the cover 26 inches for room.