How deep the fiber laser engraving can go? 

Great info in here! I have a JPT 60w on the way. Good info to share with someone who is new.

fantastic, can you share any tips on how you managed to do this without leaving the material burnt black?

Well.. as deep as your patience goes.... i did 9mm deep square hole on aluminium with 50W

can you please share the parameter of stainless steel deep engrave

How I can make smoth engraving

Thank you for teaching this. What is the work area of this 50W engraving machine? F-210(150x150)? What laser source JPT or Raycus you prefer?

Single point engraving done in a fraction of the time

You suggest not going above 80% of the laser source to not shorten machine life. Could you please elaborate on this a little more, exactly what parts get used up the most? I suppose the galvo mirrors. 80% of 50W is 40W, this reaches those mirrors. But what if I have a 30W machine, can I go 100%? still would be 30W on the galvo. What if I have a 100W machine? I suppose the galvos and their mirrors are the same in all these versions. Are there anything else in the laser source itself that gets used up?

How far 30 watts goes deep

with a 30W machine, which is the best way to do a deep engrave, like 0.5 / 1 mm over aluminum o steel ? i mean, power / speed and how many times must take a good result ? thanks a lot

Hello, could you tell me the price of that machine please ... I am trying to buy one, could you tell me where I can buy it or if you can recommend me a site ... Thank you very much

How can u remove the dust/slag that prevent the laser to go deeper

WOW!!!

Price

sounds like motorcycle

hi nice work which frequency and speed used?

And if I have 100 watts

Serious horse power

what size lens?

How long it has been taken to reach that depth?

Sir if I engrave gold can i recover 100 percentage engraving waste?

Was that a piece of steel or aluminum?

Hello Do you have this one in portable please?

electricity bill will be to the roof if u keep doing this.

And if I have 100 watts