How Do They Wire Up Multiple Switches With Just 1 Hot Wire!? What Many Don't Know!

Подписаться 508 тыс.

Просмотров 26 тыс.

50% 1

In this video I show you how to wire up and install multiple switches in one box with just ONE set of hot wires. Many have no idea this is how it should be done!
🧰 Products In The Video 🧰
Wago 221 Assortment Kit: amzn.to/4csPxpi
Larger Wago 221 Assortment Kit: amzn.to/4ewJLVF
Ideal 2 Port Lever Connector: amzn.to/4c2iBnG
Ideal 3 Port Lever Connector: amzn.to/3V7VFwt
Ideal 5 Port Lever Connector: amzn.to/3V8pLzA
Ideal Red Wire Nuts: amzn.to/4bWbayN
Electric Screwdriver: amzn.to/4bEJgqR
Klein Wire Strippers: amzn.to/4e3lUfU
Klein Non Contact Voltage Detector: amzn.to/3yFeX4K
Klein Voltage Tester: amzn.to/3V3arV7
🎥 Related Electrical Videos 🎥
Wago vs Ideal Lever Nuts: • Ideal Giving Wago A Ru...
Biggest Mistakes Made While Wiring Light Switches: • The BIGGEST Mistakes D...
Shocking New Way To Extend Short Wires: • "SHOCKING" New Way to ...
Check out and join our channel memberships for some cool perks and to help support the channel! / @howtohomediy
ALSO, here is our How To Home Amazon Store, where you can find many of the tools, items, and shirts I use and wear in my videos! amzn.to/3mcqu1E
My RU-vid Filming and Editing Gear: amzn.to/3kqqkGl
Thank you for watching and for subscribing. You can support the channel at no cost to you by using one of the above affiliate links. This helps support the channel for new content!
Blessings,
Adam
How To Home assumes no liability for damage or injury. How To Home highly recommends using proper safety procedures and professionals when needed. Our content is for entertainment purposes only. No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not How To Home. How To Home will not be held liable for any negligent or accidental damage or injury resulting from equipment, tools, electrical, fire, electronics or any items contained in this video. Attempt projects and repairs at your own risk.

Хобби

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@HowToHomeDIY 25 дней назад

Did you know this is how multiple switches are wired and installed? Also, if you need any of the tools or materials in the video, you can easily find them in the video's description!

@robertshorthill6836 23 дня назад

Back in '03, I had the pleasure of wiring up my shop by myself. I made a couple mistakes my inspector pointed out to me. When he approved my wiring project he mentioned I had done a first class job-- neater than many professional electricians he had dealt with.

@chuckz28 25 дней назад

I just had to do this last week for my basement finish on a 2 switch box. I used wire nuts. After I got done I found my Wago connectors I bought specifically for that box and frowned because it was already done and the wires were already twisted together. Such a pain with 12-2 Romex to twist it all and smash in the box too.

@HowToHomeDIY 25 дней назад

Haha never fails does it. Yeah it can definitely make it more difficult. Especially in an already crammed box. Thanks a lot for the feedback Chuck!

@aaronblackford981 25 дней назад

I used to work a lighting industry manufacturing company back when wagu pushin devices were new. They worked great for us with zero known complaints. I can’t wait to use the Ideal or Wagu lever devices.

@achardjc 22 дня назад

Thank you for this clear and concise explanation. It really makes sense the way you showed the process.

@lcee6592 25 дней назад

Nice straight forward explanation of some basic wiring. 👍

@HowToHomeDIY 25 дней назад

Glad to hear you liked it. Thanks a lot for the feedback!

@Epicness619 25 дней назад

Real easy, simple explanation. Thanks for the knowledge!

@HowToHomeDIY 25 дней назад

You are very welcome! Really glad to hear you liked it. Thanks a lot for the feedback!

@professionalinspectionserv9468 24 дня назад

Great, I kind of knew this but seeing it and your method clarifies. Only caution would be when using one line, is that it is not overloaded from other upstream/downstream requirements. If it is only a lighting branch you should be more then fine especially with led bulbs. If it is coming from a receptacle branch that has heavy loads... Keep that mind. Keeping lighting branches with lighting branches is the best method.

@Eddy63 25 дней назад

Perfectly illustrated as usual ...Thx

@HowToHomeDIY 25 дней назад

You are very welcome! Really glad to hear you liked it. Thanks a lot for the feedback Eddy!

@demontekdigital1704 25 дней назад

Man, that's really cool! I haven't purchased either the Wago, or the Ideal lever nuts, but I'm really starting to see the necessity of having them. Thank you for the useful info, I appreciate it.

@HowToHomeDIY 25 дней назад

You are very welcome! Really glad to hear you liked it. I am liking them more and more but still really only using them for lower amperage applications like this one. Thanks a lot for the feedback!

@robertshorthill6836 23 дня назад

The wagu connectors take up less space in any box. I used a few for a project and was satisfied with the ease of use.

@demontekdigital1704 23 дня назад

@@HowToHomeDIY Yeah, I'm not sure I'd be willing to use them on a 20 amp outlet, but for 15 amp light switches they'd be "Ideal" LOL. One thing I've learned is you NEVER piss Thor off.

@demontekdigital1704 23 дня назад

@@robertshorthill6836 Less space taken is always welcome. Especially in my house where there always seems to be at least 3 Romex wires in most of the boxes. As I mentioned to HTHDIY I would only ever use these in things like light switches, and maybe ceiling fans. Putting them in 20 amp outlets would make me lose sleep, lol.

@What1zTyme 25 дней назад

Good lesson! Thanks!

@HowToHomeDIY 25 дней назад

You are very welcome! Really glad to hear you liked it. Thanks a lot for taking the time to leave the feedback!

@paulattanasio3061 25 дней назад

perfect, easy explanation. Thanks again!

@rodjackson6587 3 дня назад

Great video .

@clarencewiles963 25 дней назад

Thumbs up 👍 thanks for sharing.

@HowToHomeDIY 25 дней назад

You are very welcome! As always, glad to hear you liked it. Hope you are doing well. Thanks a lot for the feedback Clarence!

@MrLuigi-oi7gm 25 дней назад

Good job! 👏👏👏

@HowToHomeDIY 25 дней назад

Glad you liked it. Thanks a lot for taking the time to leave the feedback MrLuigi!

@zekenzy6486 25 дней назад

Great video. Thank you for sharing. Have a nice weekend. May I ask, for 1 line supply power or ( 1 circuit breaker ) how many load light switch or receptacles outlet I can connect to ?

@MyGuyKirby 25 дней назад

Any tips for dealing with dual boxes and the deeper dimmer switches or fan controls? Glad you showed the various ways to connect the wires.

@RussellWaldrop 25 дней назад

If you have room and can rip it out, they make deeper boxes that can give you a lot more room.

@MyGuyKirby 25 дней назад

@@RussellWaldrop Thanks, did not know they make deeper boxes. Just decided to use lower lumen lights and skip needing to dim the brighter lights.

@AdamS-lh2ug 25 дней назад

They have shallow mount and deep mount boxes.

@scarce911 16 дней назад

I just upgraded 2 of my 3 gang boxes with new switches, they use the singlewire snaked between each switch trick (fixed that)... I'm replacing every switch and outlet in the house i just bought.. have ran into a couple "nightmares" so far, and repaired them.. my next nightmare i know of, but haven't messed with...is a light switch (pretty sure its a 3 wa because of the red wire) ..theres power flowing to bith wires when the switch is off and when its on...at this point it seems like they were using it as a junction box, and bypassed the switch function...BECAUSE it doesn't operate anything that i have found yet.. I'll hopefully get a better view of the wiring when i do the drywall on the opposite side of the wall

@justduitman 25 дней назад

Can a pigtail be used to relocate a ceiling light fixture 3 feet?

@lindalawler3024 20 дней назад

I would love to see this same video but add a remote box for powering ceiling fans that have remote controls. I tried replacing my remote control in the ceiling fan but I'm brand new to electrical and the number of wires and colors not matching left me intimidated.

@chuckz28 19 дней назад

Can you do a video on how to install a pvc cleanout on a main stack that doesnt have one?

@DodgeSystems 25 дней назад

Can I daisy-chain off an outlet to connect another outlet? I don't expect the 2nd outlet to use more than 20-30w.. just powering a TV. I expect to be able to cut the outlet wire in the attic with 2 junction boxes, and run the 2nd outlet off the 2nd junction box.

@LiqdPT 25 дней назад

Why do the wago and ideal level nuts not come in 4 port? It seems like the most common one I need (other than 2) and so I end up using 5.

@SaltMinerOU812 25 дней назад

Agree same here

@JCWren 25 дней назад

This.

@HowToHomeDIY 25 дней назад

Great question!

@partsdave8943 25 дней назад

I noticed that you fed the Hot line into the middle of the connector. Was that done intentionally, to split the load evenly on the bus bar?

@larsfrieser9792 25 дней назад

Yes

@HowToHomeDIY 25 дней назад

Very good eye. Yes. Some will say it doesn't matter but to me it just makes sense.

@partsdave8943 24 дня назад

@@HowToHomeDIY I agree. Would also do the same.

@handyandy8671 25 дней назад

what gauge wire and circuit breaker is required for all the lights your connecting?

@surferdude642 25 дней назад

14/2 and 15 amp circuit breaker.

@handyandy8671 25 дней назад

thanks!

@AziFloww 23 дня назад

So what if one of the switches is a 3 way?

@fauxque5057 24 дня назад

I hate triple gang boxes. I wished the made them larger in order to stuff the wires in there. It really gets to be a mess when you install smart switches and need a common wire for each switch. They could make a pocket on the top and bottom so you can stuff all of the wires in there

@gregmckinley5178 24 дня назад

They do make bigger wire nuts. Grey and blue.

@HowToHomeDIY 24 дня назад

Yes they do. More so for larger gauge wires. Not really designed to accommodate 7 wires.

@TheObsesedAnimeFreaks 23 дня назад

What about daisy chaining the line wires?

@HowToHomeDIY 23 дня назад

How would you do that without double stacking the wires or backstabbing?

@TheObsesedAnimeFreaks 23 дня назад

@@HowToHomeDIY depends on the device? Can you Explain double stacking? I know some devices have places for 2 wires per terminal, my Kasa smart switches do. But I don't know how effective that is or if there is a better way. Space becomes a concern with more wire nuts.

@HowToHomeDIY 23 дня назад

Yeah double stacking is putting two wires on top of each other on one terminal screw. Most single pole switch won’t have the plates where you can put two wires. Obviously if you have that with a certain brand or commercial grade switch it’s an option. I’m not a fan of it personally. I like my switches and receptacles to work independently of each other. I’ve not had issues with space in a box unless the box is above its box fill calculations. Outside of that the wire nuts haven’t been much of an issue. But that’s my opinion.

@TheObsesedAnimeFreaks 23 дня назад

@@HowToHomeDIY TY, I have heard that the biggest complaint about using the terminals that can take 2 wires is that if that terminal fails, that other devices can go down in the daisy chain. I've not experienced this issue myself, but i do know that's a concern. As a novice I do enjoy the challenge of working with simple electrical wiring, but i would like to do so safely. In addition, I've had issues trying to figure out how to get involved int he electricians guild/union, for training, and would like to know if there have/could make a video on that? there's not an easy way that I've found to just apply online.

@rickzwolinski 25 дней назад

Who writes your reviews/comments- relatives?

@HowToHomeDIY 25 дней назад

Your mom.

@highvoltage1979 24 дня назад

That’s your mom Rick , are you going to stand for that

@petem6291 23 дня назад

One little detail that may help out in future repairs or troubleshooting is to wrap black or red tape around the black wire that power the whole box ( just a band of tape to indicate the incoming power wire)

@gregmize01 25 дней назад

SLICK!

@HowToHomeDIY 25 дней назад

Glad you liked it! Thanks a lot for the feedback Greg!

@tedbush1870 24 дня назад

This is your way of doing it, doesn’t mean there isn’t a different way, I have wired 1000’s of homes and don’t do it that way, people who don’t know what they are doing shouldn’t be doing electrical work

@lindalawler3024 20 дней назад

So if I call an electrician instead of a handyman, they won't think I'm wasting their time? I'm not kidding, I'm a new homeowner, no husband, and I wasn't sure which is more appropriate to fix ceiling fans. They have remote controls and even with the switches off I can turn the bedroom light on when I use the remote for the living room.

@rickzwolinski 25 дней назад

You dont want to do that. Feed the the switches from a continuous single wire. End up with two wires under the connector. That is just inexperience showing thru. Never mind your ridiculous wago, dont need them. You are really stretching to create topics.

@HowToHomeDIY 25 дней назад

Always great to see you and your positive attitude Rick! Take care of yourself!

@Anthony-bz1vt 25 дней назад

garbage. no way a licensed electrician does this. first off you use green wire nuts for ground that have a hole in the end. holy crap. lol. god bless RU-vid.

@HowToHomeDIY 24 дня назад

That is so odd. My home was wired by a licensed electrician and not one single green wire nut in the boxes. In fact, I have yet to find much work at all done by an electrician using the green wire nuts on the grounds. Weird.