How does a Resin Printer Work? - Before you begin Resin 3D Printing (Part 1)

Подписаться 65 тыс.

Просмотров 36 тыс.

50% 1

BUY the Uniformation GKTWO Here
(Global) (Discount Code “FAUXHAMMER): geni.us/Unfomation
AMAZON: geni.us/GKTWO (This and all Amazon links in our video description are affiliate links. Clicking these and making any purchase will earn us a commission from Amazon at no cost to you)
Get HEROQUEST here - geni.us/HeroQuest
Guy's Video: • Is 3D printing FINALLY...
Golden Demon winning Steve now has his own channel too / @lpp_yt
My Referenced Videos
Configure any printer - • How to Print Perfect M...
Support Miniatures - • How to Support Miniatu...
3D Printing in Cold Environments - • How to 3D Print Resin ...
WIN A GKTWO BUNDLE (SEE BELOW)
Hey guys, after my last video got a lot of feedback regarding it;s length, I wanted to let you all know that this is another video that may not resonate with many of you who have followed for a while. I have about 4 videos aimed at absolute beginners coming out.
The point of this one is for new people to watch before they even consider looking for a resin printer. This is an overview of the whole process, with a few handy tips and is a general guide on how printing works.
The next video will be more about the post-processing stage.
I wanted to go back and do these beginner videos before I move on to more advanced stuff, which is coming soon, including a video on how to dial in your printer perfectly and what all the settings mean (which is a long/boring video) that many people may find benefit from.
Whilst this may not be the video for you. I'd still love it if you could watch it, to help boost it to more people out there, Even if you just click play and leave it on Mute.
I just wanted you to know what this was, before people start complaining it's a waste of time.
WIN A GKTWO BUNDLE
Once again, we have another GKTWO Printer Bundle to give away...
To enter, It's really simple, There are the same simple steps as always to enter - with a twist.
1. Be subscribed
2. Watch the video - to the end
3. Like the Video
4. Comment on the video
5. Share the video ( will check. if you win and then can't show a link to a public source where this was shared, I will rescind the win and do another draw. sorry, This is all about driving Uniformities promotion)
This is part 1 of a 3 part series. So you'll need to do the same next week too! • How to Clean Resin Pri... and the How to Paint Resin Miniatures video (Called Part 3) • How to Paint 3D Prints...
When these videos reaches 100,000 views between, I'll pull one commenters name from a hat, and they'll win a GKTWO, with wash and cure stations.
If you do this on all videos, that's 3 entries
The winner will be announced by me on a livestream and will be contacted by me via my account on here. Your details will be sent to Uniformation who will arrange your Printer, Was and Cure system to be sent to you!
Competition is open to anyone that Uniformation ships to, check eligibility here geni.us/Unfomation
Join this channel to get access to perks:
/ @fauxhammer

Развлечения

Опубликовано:

18 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 609

@MidwinterMinis 4 месяца назад

I absolutely couldn't have done this without your awesome guidance, thank you for being so generous with your time and patient with my stupid questions. ... but you're absolutely wrong about that HeroQuest rule ;)

@fede4819 4 месяца назад

What i want for ALL future 3d printers is to have a heater by default, it's criminal to not have it in 2024 as it's such an essential part to ensure good printing.

@rustyshaklford9557 4 месяца назад

It's not like it's difficult or expensive either; I doubt integrating a vat heater would add more than $10 in manufacturing cost per unit.

@Kiddeth 4 месяца назад

if you can't afford an external heater, how did you buy the printer. so no its a lame idea and just an added expense and something else to go wrong

@fede4819 4 месяца назад

@@Kiddeth That's an hilariously bad take and dumb reasoning, it's better to have an essential feature already builtin instead of having to spend extra time, troubleshooting and money to add it anyways to get an acceptable experience, especially when it doesn't add much cost to begin with.

@BisphamTangerine 4 месяца назад

@@Kiddeth 😂😂😂😂😂😂

@erdsim4248 4 месяца назад

When I watched to video, I realized that we only need one thing that is the heater. In fact, all the other parts are added for nothing, you dont even need the screen for resin printing. Just heater, heater and heater. Since GKTWO is the only model on the market with a heater, this makes it perfect :)

@hamthomas4715 4 месяца назад

I'm so very thankful I found your content BEFORE I fully invested in resin printing! The process has been sooo easy compared to the horror stories I've heard others have gone through, and that's all thanks to you!

@Mr.MightyGaming 4 месяца назад

Your videos have been a huge help with helping me decide if I want to get into resin printing. I already have a FDM printer, but it wasn't printing at the quality I wanted for miniatures. I ended up buying the GKTWO set as my first one today based on yours and some of the other reviewers! It's great content and really helps to inform us newbies trying to get into the space so thanks a lot!

@lucaclerici1858 4 месяца назад

Thanks for shedding light on resin 3D printing! As someone familiar with FDM, this is my first dive into resin printing. Your video provides invaluable insights for better understanding this world. 🙌

@wolfiere6825 4 месяца назад

As someone who uses FDM almost daily now, I have always wanted to get into resin just for the quality you can get in prints both for busts and minis. This video has been super informative.

@user-le7br1cg4e 4 месяца назад

Trying to restart this hobby, and been watching your video for the last days (a lot)! Huge thanks for being so direct and transparent. Super well done! Especially the videos of screen resolution being irrelevant were a bit of an eye opener. Well done!

@CHlustanec 4 месяца назад

I just conviced my wife, that we really need a 3d resin printer in my...I mean in our lives. Now I need to learn how to use it, because I really want to avoid "I told you its nonsense" situation :D

@nickjowett5735 4 месяца назад

Love your channel Ross and thanks for helping out Guy!

@theinsane88 4 месяца назад

One of the best sources for honest info. Keep up the amazing job!

@HamsterChew 4 месяца назад

It was your channel that got me interested in printing in the first place. Thanks for your time and effort.

@Johan-is4nz 4 месяца назад

I recently started 3d printing and I'm really into warhammer so your videos are just perfect to learn everything there is to know about 3d printing, thank you !

@DadLearns 4 месяца назад

Really appreciate your videos - this is another great one

@williamcosgrave4535 4 месяца назад

Thanks for all the info you give.

@software_eng 4 месяца назад

Even for those of us that have been at it for a year or 2 this was still a great refresher

@hickdead6188 4 месяца назад

Thanks for putting this information all together and in one place

@GREENSP0RE 4 месяца назад

Thanks for helping all us new folks out!

@Pacerfan 4 месяца назад

I've been needing a video like this to help me get into 3d printing. Thanks for the vid.

@nm72510 4 месяца назад

Knowing more about resin printing would have helped me substantially. I came from FDM printing terrain. I bought my first resin printer without realizing how frustrating and expensive it could be. I literally gave up after my first attempt and returned my printer. About two months ago, I bought a GKTwo and my experience has been significantly better.

@clauberalex 4 месяца назад

Since I've been researching resin 3d printing myself for the last few weeks, this video is just what I need! Thanks!

@CAPEDM 4 месяца назад

I’m extremely grateful that I discovered your content prior to fully diving into resin printing! The procedure has been incredibly straightforward, unlike the daunting experiences others have shared. All credit goes to you!

@donnell9238 4 месяца назад

Going to make my first purchase, one of the Phrozen Sonics mini or mighty idk yet.

@predator837 4 месяца назад

Alot of great tips for someone who have researched the trials of a 3d resin printer. I will come back too this video when I get my first printer

@ZealousDragon 4 месяца назад

Really great seeing your knowledge and bluntness 😉 grow since the beginning. Glad I came across you early on to see this. THANKS!

@gregoryamer 4 месяца назад

Thanks for the channel. Getting started with resin printing seemed extremely intimidating for me. Your videos helped me make a decision to try it.

@savagelands4496 4 месяца назад

Awesome, thanks for the video fauxhammer ❤

@tcunero 4 месяца назад

So nice to have a miniatures printing channel. Honest fair and open. Thanks!

@S7Glock 4 месяца назад

Great video, nice to see you getting back to basics. I watch a lot of your early videos when I was getting ready to buy my first resin printer last year.

@garolish 4 месяца назад

As always, nice and informative video. Even though I am not a beginner I can only appreciate you helping out everyone who is starting

@cbytenski 4 месяца назад

I have to say I was interested in resin printing for a few years now, but didn't dive in till I found your channel. Your videos gave me the confidence to give it a go and have loved every moment of it. I'm now looking at getting a second printer. Thank You!

@Mikepaintsred 4 месяца назад

I've been umming and arring about getting into 3D printing the last few weeks and your videos have definitely steered me in a direction which is making it look more likely I will be confident in starting!

@DFDragoon 4 месяца назад

Great vid to help new folks out. Was just talking about resin printers with my brother as he expressed some interest and asked me about them. Will make sure he gets a look at these vids. Thanks again!

@TheMLA66 23 дня назад

Great info, again you put out the best learning content around from printing to painting to needed tools, thanks for all the info.

@hdtpick 4 месяца назад

Love all of your videos. Your videos got me into 3D printing and I can't get enough of it. A GKTWO would be an amazing addition to my 3D printing set up. Thank you FauxHammer

@txed0msk 4 месяца назад

Great video as always. Really trying to get into the hobby and you've made it feel so accessible. Thank you!

@JosephPalma 4 месяца назад

Been 3d printing two weeks and I'm just finding all the best RU-vidrs. I'm only doing fdm for now but do plan to add resin eventually. But I've watched a bunch of your videos and especially love you not blowing smoke about the differences between resolution and similar.

@Aardvark_AU 4 месяца назад

Thanks for the great content. I've been putting off 3D printing for a while now, until I stumbled upon your channel... you've made the whole process easy to understand and something I now feel confident to try. Your mix of reviews and "how to" videos are exactly what I needed. Cheers!!

@orwinden 4 месяца назад

Thank you for being such a great source for 3d printer knowledge!! 🙏

@hifischlp712 4 месяца назад

listened to this video while I was cleaning and curing my last 3d print. I love to freshen up my knowledge on the hobby and especially the safety issues. Gladly am still doing everything right up to now ^^

@rodolforesurreccion8340 4 месяца назад

Thank you for video. I’m trying to get into 3d printing. Your videos are a big help understanding the process.

@PereMorata 4 месяца назад

Since I discovered your channel, I do not miss any of your videos. Uniform GK two was a blast when you first reviewed it

@tonyanaya8540 4 месяца назад

Thank you. You have made the dive into resin 3d printing less stressful compared to jumping in blind. Your videos are extremely enlightening

@grbodeep9361 4 месяца назад

Outstanding! Enjoy your thorough explanations & have a basic understanding for it so thank you.

@jod3000 4 месяца назад

Really good start to the series, looking forward to more

@aewers7 4 месяца назад

getting ready to start printing myself your videos have been astronomically helpful for getting me ready to take this leap. thank you and keep up the great work

@christopherpoulin5632 4 месяца назад

Your videos have helped with my experience with resin printing

@KevinJernigan 4 месяца назад

Thank you for these. Not only are your videos are my goto when I want unbiased opinions and reviews. They are always helpful.

@robk5094 4 месяца назад

Your set up any printer video was a life saver!

@JB_Anubis 4 месяца назад

Ever time I watch one of your view I'm a step closer saving up to give this lot a go . Good job and keep it up

@oniaeon 4 месяца назад

Thanks for all the great content spreading the good word of 3D printing and how it's not as horrid to get into as people think

@mikesmith-jv6fs 4 месяца назад

Great video, currently looking to upgrade my printers and you have been so much help :)

@Argent911 4 месяца назад

Your videos have made me want to try resin printing, thanks for all the great info!

@JoeKer992 4 месяца назад

Great video as always! Look forward to part 2!

@theo._.5593 4 месяца назад

Always great to cover the how to to beginner to expert, there's always new ppl jumping in and new tips to discover so I salute you for doing this :)

@affroking 4 месяца назад

Literally just watched this after I setup my new GKTwo, was invaluable, thanks for the run down of the fundamentals

@matthewdoucette1 4 месяца назад

Thanks for all the reviews and research, very helpful!

@colinrice9302 4 месяца назад

After finding out about 3d printing, trying it on a cheap fdm, failing, then finding out about resin and not wanting to fail again, I started watching many many vids. I finally found a trustworthy voice of guidance. If I don’t win, I’ll probably save up and buy one anyway. Thanks for your honest reviews.

@fivefurlife 4 месяца назад

Keep up the good work and I am looking forward to part 2. This channel is the man reason I have gotten into resin printing.

@theborgster8497 4 месяца назад

This is the channel I needed to find before flogging my first resin printer. Going to have to start over again.

@kvn813 4 месяца назад

Always enjoy FauxHammer's videos. Keep 'em coming.

@punchboardchampion9266 4 месяца назад

I'm currently saving to get a resin print. So much info on all the different print it's easy to get overwhelmed but your videos have been a great resource.

@baldurironshield5083 4 месяца назад

thank you for all the videos it has be very helpful for finding out about new printers and the basics from a beginners perspective. Living in colder climates every printer needs to have a heater. ever since you presented the GK2 i have been looking to pick it up.

@susand8816 4 месяца назад

Thank you for doing this video series. I have friends and family who want to know about how to get started. Now I can add this series to my recommended list.

@Curcal 4 месяца назад

Love your printer reviews!!! They are honest and informative!

@spawncalibur1022 4 месяца назад

As a new resin user.This is perfect!

@Quuelas 4 месяца назад

Really informative! I'm saving this to rewatch later to really take it all in

@ninhydren2321 4 месяца назад

Thanks for the beginner breakdown. Can't wait to eventually get my own resin 3d printer. I have been watching your channel a lot as research into what the best is for me.

@luisn7740 4 месяца назад

The videos that you do are very interesting and informative. Thank you.

@QuangNguyen-wb5kd 4 месяца назад

Thanks for the info, I might finally get into resin because of you

@troll57100 4 месяца назад

Your setup videos helped me get my og mars up and running again. Thanks!

@soulgamingttv858 4 месяца назад

Amazing video! Wish I had this video when I first started my resin printing journey!

@wesadie 4 месяца назад

Great video buddy, really helpful.

@Lingsais 4 месяца назад

I work with 3D printers at work, but don't own a resin printer myself, I do recommend this hobby to anybody who has time and a safe space for resin. A resin printer at home would be great though!

@pwgreene 4 месяца назад

I've had my resin printer for about 6 months now, so I have a pretty good grasp on the basics, but this video is invaluable for anyone who is brand new. I'm very much looking forward to part 2, as well as any videos about slicer settings.

@tormox1 4 месяца назад

Thanks for the videos. Very helpful in getting started with the basics and the more advanced stuff.

@kookieslayer 4 месяца назад

That's going to be a real useful couple of videos!

@thekennywayne2595 4 месяца назад

Hammer is awesome, this channel has improved my printing so much.

@AlberichKupferbart 4 месяца назад

Coming from FDM printing, theres so much more to learn. I think I need to dial in my Settings from start. Thank you verry much for your very informativ videos.

@cookiemonster5118 4 месяца назад

Done and Done! Thanks so much for you absolutely informative videos. You've helped this old man's introduction to resin printing exponentially!

@gkillsblast 4 месяца назад

Been wanting to get back into the hobby because of the gk2. So im glad you our running through the basics while giving people the chance to get such a great machine.

@joshjesudowich2520 4 месяца назад

Great video. Super insightful

@henrywood8380 4 месяца назад

Ive been looking to get a 3d printer and your videos have been very informative. Thank you for the Content!

@jasontornichio366 4 месяца назад

Great video and I am looking forward to the next parts.

@KarterAurian 4 месяца назад

Am really enjoying your 3D printer tips and reviews.

@davidcamacho3739 4 месяца назад

I've been running the GKTwo ever since you made the first video on it! Thank you for keeping up with the community and always being honest with us! Also, I hope your resin comes to the states one day!

@davelogeman 4 месяца назад

Thanks for another great video!

@TheMorrowgamer 4 месяца назад

Your content covering the good and bad parts of the printer was what sold me. Thank you

@joelfeliciano6230 4 месяца назад

I have quite a few friends who I have sent your videos to to help them get started with resin printing ans understand how much of an art it is to prepare, support, and slice a file for a resin printer. That sequence of events is just as important as the model itself, if not more important

@charmande80 4 месяца назад

I never heard of the GKtwo until your videos. Really love this printer. Great videos.

@GremlinDIY86 4 месяца назад

Awesome vid. Been watching your videos to learn more into resin printing. Just got started on FDM recently. I really find this info usefull, keep up the good work.

@Getresdesign 4 месяца назад

Great video for entry level!

@Ezacu 4 месяца назад

Decided to look into resin printing and one of your videos on the GK TWO came up. Really makes it seem like an approachable way to print models.

@kurtkuschinski1425 4 месяца назад

Condensed overview with links to further deeper dives into the topics, nice one!

@li9htnin9cutter94 4 месяца назад

Been doing a lot of research on 3d printing so i can widen my hobbying and thanks to you FauxHammer i have had many of my early worries dismissed on what printer would be right for my budget, keep doing the good work mate.

@johnrandecker8063 4 месяца назад

I've been using FDM printers since before the Ender 3 was first released but have never taken the plunge into resin printing. It's nice to see honest videos about what the pitfalls and issues are. Keep up the great work.

@comabsolver 4 месяца назад

I'm honestly really excited to see Guy here and what he will come up with!

@ZeGermanAUS 4 месяца назад

Great video and descriptions - will link to anyone i know thats looking to get into 3d printing

@xavierphilibert4936 4 месяца назад

Probably the best content about 3d print !

@jamesambrous 4 месяца назад

Thanks for all the great resin content. Currently using an ender 3 but really want to upgrade to a resin printer. This process still feels like magic to me just watching the prints rise from the liquid. Just wild.