This Is Why You NEED A 8K 3D Printer

Подписаться 25 тыс.

Просмотров 12 тыс.

50% 1

Get your own Uniformation GKTwo here - www.uniformation3d.com/produc...
Use this code for $80 off - battle
This is an affiliate link which the channel will receive a kickback from at no extra cost to you.
This has got to be one of the best models ever produced for 3d printing and its all thanks to this creator - www.myminifactory.com/users/M...
/ mezgike
Go support him!!
Link for the bases used - www.kickstarter.com/projects/...
Link for the video that helped me with the airbrush - • CLEAN YOUR AIRBRUSH, S...
Join this channel to get access to perks:
/ @battlebrothersam
If you want to support the channel further please pledge to my patreon.
/ battlebrothersam
Amazon Affiliate Links to stuff i use(As an Amazon Associate I earn from qualifying purchases you do after following this link - at no extra cost to you):
Printers / Wash Cure
Phrozen Sonic Mighty 8k - amzn.to/3D2VY2P
Phrozen Wash And Cure Station - amzn.to/44ycDHd
Phrozen Aqua Grey 8k Resin - amzn.to/3rejC9T
Sunlu ABS Like Resin - amzn.to/3pLy3BQ
Airbrush Kit (The kit I use)
Fengda Kit: amzn.to/3Tdsar5
Follow me on Twitch - / battlebrothersamyt
This video was inspired from channels like Midwinter Minis, Goobertown Hobbies, WintersSeo, Say Hi Paul, Squidmar Miniatures, Miniac Painting, Black Magic Craft, Real Terrain Hobbies and Geek gaming scenics.

Опубликовано:

4 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@battlebrothersam 4 месяца назад

Get your own Uniformation GKTwo here - www.uniformation3d.com?sca_ref=5528211.H9GEj1BZlB Use this code for $80 off - battle This is an affiliate link which the channel will receive a kickback from at no extra cost to you.

@OnceinaSixSide 4 месяца назад

Nice to see Minirater gettin' some love! Cheers for helping spread the word 🍻

@battlebrothersam 4 месяца назад

Thanks for all your hard work you do for the community!

@bww33 4 месяца назад

Mezgike has excellent models - i print his ork units, and his presupports work for me 100% of the time.

@Asumis1988 4 месяца назад

This whole line of dredge Marines would be a good reason to start a Deathguard Army. Nice Paintjob! It really has a lot of details to take care of.

@ryanniksch4174 3 месяца назад

Thank you so much for the link this creator is freaking awesome!!!!

@gregpower308 4 месяца назад

Great work mate. You’ve got self-deprecation -itis. You should be rightly proud of yourself and your creativity. I am really looking forward to seeing your painting work grow and develop. The prints you choose are amazing so showcases your talent. Thank you for sharing your work. 😊😊😊👍👍👍

@battlebrothersam 4 месяца назад

Thanks so much brother!

@andyswarbrick7452 4 месяца назад

Love the honesty in your videos. You’ve done a great paint job there. 10 hours is quick for such a big model and you’ve added loads of lovely detail. 👏

@Baleandor 4 месяца назад

This was a treat to watch! I love Mezgike's stuff because they're so part separated. Heck, I've asked him to push the separation even further!

@merlin566 4 месяца назад

Mezgike is an awesome STL creator.

@Marsuvee 4 месяца назад

I've printed some of Mezgike's Bois. Great creator!

@uwegraf8013 3 месяца назад

Great video and paint job. Thank you very much for sharing 👍

@battlebrothersam 3 месяца назад

Thank you brother!

@HEYDUDEITSTONY 4 месяца назад

I enjoyed this video quite a bit, thank you brotha

@irishology 3 месяца назад

Great video mate

@larry84903 4 месяца назад

Hell yeah more painting videos Sam!

@TKID-17105 4 месяца назад

Mezgike's Dredge had me hooked the second I saw them. I'm seriously addicted to them. I literally have never had ANY interest in Chaos Marines before I saw these, but there was just no way I could refuse them- the theme and sculpts are just too cool. Well supported, amazingly engineered to minimize 'dead space' resin wasting (beyond just hollowing), and a joy to put together. Although I admit that I frequently trim the pyramid-shaped posts off the torsos for more flexibility in posing arms.

@bjf10 4 месяца назад

Painting videos are great!

@fedesiempre 4 месяца назад

MiniForge has some nice painting tutorials for beginner to intermidiate and intermidiate to advanced

@TableFlipFoundry 4 месяца назад

Great video man! I'd love to chat with you about the cones if you ever want to to make sure we clear up some misconceptions about it. We have v3 coming out very soon and its a vast improvement over v1 and includes some added fun and more features.

@battlebrothersam 4 месяца назад

Thanks brother! That would be great! I'll happily admit I just used them because everyone else I talked to used them but I never really looked into what they were used for! It's great that your implementing new versions as well and I'll have a look at V3 when it comes out to see what the craic is, also your supporting videos really helped me out with some past videos so thank you so much for having them available on RU-vid and with easy to follow instructions and explanations on why supports should go where they go

@leethax100 4 месяца назад

Just like model painting is different from army painting, using pre-supported models and manually supporting have different roles. A statuette, diorama, or center piece are well worth the attention to detail. But if you are trying to get 2000 points on the table, you probably won't have the time to support every model!

@SkeletalStevo 4 месяца назад

Your videos are informative , funny, and down to earth. We even adopted your "Jesus Wept" in the house for small things like stubbed toes or when someone washes their hands while your in the shower getting cold water (evil look to my boys) LOL. Keep all the mistakes, successes and painting please also awesome job :)

@battlebrothersam 4 месяца назад

Hahahaha jesus wept is a common staple here glad you enjoyed it brother!

@Storehouse-805 4 месяца назад

Amazing model and painting! This is a serious draw to start a deathguard army!

@battlebrothersam 4 месяца назад

Thanks! The model did most of the hard work with the details

@worldoftanksreef1230 3 месяца назад

iv just printed the same bases and all mine warped while curing any suggestions on what could be causing this?

@alexistoulouzan7663 4 месяца назад

As a proposition for your next video, you should print the new primark snakemen which is available. Unfortunately, it is unsupported at my knowledge

@battlebrothersam 4 месяца назад

Ah that's a bummer with my timing for things hopefully if it becomes presupported I can do it

@alexistoulouzan7663 4 месяца назад

@@battlebrothersam I would like to help you by giving you a presupported model but my elegoo mars can't print it as the size is very big. Especially for the wings

@dasdasdadsa5910 4 месяца назад

very nice video but how to buy the bases the plege is ended

@joshuamichael1232 4 месяца назад

OI LOKEN THEY'RE TALKING ABOUT YOU!!!! Milkman assemble!

@battlebrothersam 4 месяца назад

I've just found out from him that he done the supports! What a lad!

@Zeeflyboy 4 месяца назад

FYI there is a really cool new cones of calibration coming, available on their discord already as a beta

@battlebrothersam 4 месяца назад

Oh excellent do they still just test tensile strength?

@primitiveman6666 4 месяца назад

Uniformation has not upheld it's guarantee withing a year of purchase and is now purposefully ignoring my emails requesting for support and replacement parts. I bought 2 GKtwo a washing and a curing machine. Overpaid, massive duty fees to canada, and now i cannot get any support or parts. Truly an awful experience.

@DrVesuvius70 4 месяца назад

Magnus invented the Cones of Calibration. They're s Tzeenchian trick to make everyone's prints overexposed so Geedubs figs look better by comparison. True Story.

@ludo3023 3 месяца назад

How to have the discord chanel ? Already subsribed on Patreon, great job !

@battlebrothersam 3 месяца назад

Send me a message on patreon brother

@ludo3023 3 месяца назад

@@battlebrothersam done :)

@onilegends6650 4 месяца назад

Volume is really low. Not sure why.

@battlebrothersam 4 месяца назад

I'll look into how it is compared to the other videos in my editing program!

@liangweihao7932 4 месяца назад

Can I ask, why is so many painting RU-vidr's setup in such a darkened room with poor lighting? It really makes it difficult to see anything clearly about the painting. You mentioned "while the whole model looked quite bright" and I was like, I can't tell at all!

@battlebrothersam 4 месяца назад

Lol in person it looked very bright and while I was editing I was like god the camera didn't pick up what it was actually like! I tried doing a darker scene to make it look more appealing but I know exactly what you mean! The darker background also hides A LOT of mess on the desk lol

@liangweihao7932 4 месяца назад

@@battlebrothersam I thought it had something to do with the camera requirements for videoing, because the whole darkened room setup is very prevailing amongst many channels. But it is actually very, very bad for viewing purposes.. Can't see the details of the miniatures and the painting. I wonder if the other RU-vidrs know of this..

@skinks_and_such9865 4 месяца назад

Ameralabs town >>> cones of calibration imo

@sarahbrowning1425 2 месяца назад

Promo'SM 🎶

@andyseverance1519 4 месяца назад

The Cones of Calibration are quite possibly the worst calibration test ever. It was designed to test the tensile strength of one particular resin. Do yourself a favor and delete the STL. I find the Amera Labs Town test to be all that is needed for calibration.

@ipbk8471 4 месяца назад

I like the validation matrix

@ipbk8471 4 месяца назад

Does the town also test exposure or is it different

@haskear2 4 месяца назад

The cubes of calibration are really good

@alecryan5962 4 месяца назад

I just got a new Saturn and ran a few reps of the cones of calibration. I don't have that much experience with the cones outside of this because I used the Siraya Tech test model with my previous printer with some mixed results. My first actual print after using the cones seemed to work fine. Is there any particular reason the calibration isn't sufficient with them?