How FAST can I pull the DASH on a FoxBody Mustang? COMPREHENSIVE REMOVAL….How To Part Two 

I don’t think I’ve ever owned a foxbody that I didn’t have to replace the ignition switch on. Also, I’m sitting in my foxbody watching your video 🤣

Man that is an in depth removal 😲

While watching this video the color combination of your interior reminded me of the night rider car from the 80's. Enjoying the videos Matt, thank you.

More like this please! Great job Matt, and keep these sorts of videos coming. Document this stuff and get it out there. SAVE THE FOXES!

Thanks, Matt. These videos will really help me. I had watched them when you first released them...but I'm in the process of pulling my dash out today, so I watched them again!

This is a very good, detailed video. That blend door cable is just like the control or safety stop cable on lawnmowers. I had to put a new one on the self propelled mower that I just refurbished and gave to my 78 year old father. So good to see you in Brew2L's live stream. Thank you for the shout out in there. I saw the wrench next to your name. Moderator status. LOL. I'm glad I didn't get too rowdy, or you would have had to kick me out. Seriously though I was glad I caught the stream.

You’re taking me back to when Boomerang was all apart like that...it was really overwhelming for me 😳😫😂😂 but so worth it!! I think 2 hours is pretty good!! 👍👍

Matt & Matt, BIG Thanks again for taking the time for these last Two videos. It really helps us foxbody noobs. I hope Matt's getting a little Extra business for being a You Tube Star. Looking forward to seeing the repair of the ignition switch plug fix.

That's a clear break down on how to get the dash out. Its much needed, every foxbody owner is going to have to replace a heater core at some point!

I’m glad y’all did this video, I will definitely have to pull my dash, picked up a evaporator from Matt today, maybe start it next week. 🙏🦊

Thanks for this, always nice to have a refresher

Very in depth how to video. Great job! The outtakes at the end were fun.

Nice work and pretty quick, too!

Ford was definitely not known for their ignition switches.

This car has tottaly got me hooked i cant wait to see your progress and whats next every time i watch! keep up the great & inspiring work... Happy late B-day!!!

You got it, nice job!

Great job. I look forward to seeing more videos related to this car, especially the heater core replacement.

Nice video Matt!!

Wow! You guys are dedicated.

That cable attached to the heat knob had me baffled

Great in-depth dash removal

Glad y’all did this video, for sure I have to pull my dash next, I picked up a evaporator core from Matt today and I will probably start that work next week🙏🦊

Thanks for all those insights when time to start on the heater core don't think as much will get broken

OH MAN!🤯 I HOPE I NEVER HAVE TO DO THAT ,BUT NOW I KNOW HOW TO DO IT🤔🤔 THANKS MATT!!

Hey matts...great job i change my. Dash cluster and it wasn't to bad but the whole dash i whould be lost putting it back great video keep up the hard work i.ll be watching...

That was a excellent and helpful video on taking out the dash. Learn some new tricks for sure. I might be taking out the dash on my 90 notch soon. LOL

NICE! So when I finally do my heater core, I might as well replace the ignition switch. What else should I go ahead and do with the dash out. Also, these two vids were great. This is the type of information that is valuable. Matt laid all the sizes and tools and witch is a huge help! Great vid.

The best way to learn is to do. It’s great seeing you getting those hands dirty. Keep it up and the ssp is going to be awesome.

Not bad man 2hrs for a full dash removal is good for never doing it before

Awesome content! Will you be doing and in depth guide on replacing the Evap and heater core?

Hey Matt you did a great job on that dash and made real good time. Bet you can't get it back in in 2 and a quarter though. Lol Hard to believe all those components and wires are between you and the firewall.

Late but I'm here champ you really have been working hard mane but...im actually working on my mustang as well

Great job getting that out so quick! I wouldn't even try on mine lol

I hope you mapped out all them bolts and screws.... And I'm impressed with the timeframe to pull it for a 1st time! Keep at it bud... And as always luving the bloopers!👊👊😂

dang man .....your going to be a mustang resto pro!!!!! maybe Matt has a job for you after you learn all that...lol

Nice video Gern 🤣🤣 I had that "thing" in mine too at 4:35 I thought it was for the hood release? Zip tied ignition switch 😂 Man...I've seen it all with these Fox's! I had so much duct tape on mine when I bought it...why don't people just replace the part? Could of used this ohhhh, 6 months ago...I did it the way Matt says not to...swing it out. This is much cleaner👍

I wonder if you can clean that carpet... I bought a grey carpet from pick n pull for my 86 Saleen. Scrubbed it by hand. Pressure washed it. Came out near spotless. Nothing fits like an original. Nice progress.

Might as well put in a nice new heater core while your there....or you might have to do that all over again...my dash has been just hanging for 2 months..cause I was going to put a new core in and just haven't got around to it...

Great video. Can you pull the dash fully out without pulling the driver side harness through the firewall? I’m thinking Basically pull the wires that com through the cluster area Toward the firewall. And the dash pops out. I’m guessing. Or is there something holding the harness to the cluster area?

Dam I have no dash, steering wheel, column hardly interior trans or motor what I have I got myself into haha

Where did you get the tool for the electric connectors?

How did you take out the hvac cable

What is the name of the tool you used to disconnect the wiring harness at 9:07

I would rather troubleshoot electrical than pull a dash apart. DAMN!!!!!

Where can I get that tool undoing the plugs?

can you leave the wiring harness in the car and just remove the dash?

Do you have to put all those wires back in, I mean vehicles back in the day didn't have all those wires, why do we need so many now. It would be cool to only put in half the amount or less and just make the whole thing carburated.

That wasn't bad at for ur first time u cheated with the air tools lol just kidding I bet that thing had all kinds of rattles I would change that dash pad over the glove box I am going to be doing like a black & tan or beige interior I am going to put a black dash pad on my dash with the tan vents did pretty good!!!

That dash just about kicked your butt, but🤣 butt but you stuck it out and got it done but you should have enlisted the help of fisherman jon because you would have done it a lot faster and been less tired and all he would have probably wanted out of the deal is a big fat mouth of tobacco and he would have been happy as can be on camera with a mouth full of tobacco getting that dash out 🤣😂 and I think everyone would like to have seen him with a big dip getting the work done in record time I mean. 🤣 but I'm sure that you will get him next time because you have got a lot of work to do but when you get done with it you will have a very dependable car and will have fun on the road course. I've been porting my intake all day and when I got close to getting finished with it I ran out of 40 grit sandpaper. That's what I use to get rid of a lot of material and put it on a cable so that it will go around the curves in the intake. But it should help that 347 breathe. You would be surprised at how little the ports were on a performance intake compared to the heads . I can make another intake with all the aluminum that I have removed from the ports on my intake. It's a dual plane airgap intake but the ports was nowhere near big enough. I wanted to make the ports the same size all the way through instead of just gasket matching it cause I am going to try and get all of the Beans out of it 😂 cause I'm supposed to take it to the dyno this fall if I have it ready and I want to lay down all the powah that I can and maybe out powah everyone there 🤣😂🤣💪💪💪💪🚗💨💨😁

Gotta take out my dash to seam seal some water leaks.

First.

3rd lol 😎