How I apply Rubio Monocoat Oil Plus 2C 'Black' to a QS white oak table

Подписаться 1,3 тыс.

Просмотров 66 тыс.

50% 1

In this video I show how I apply Rubio Monocoat Oil Plus 2C to a table top. This particular table top is made from 2" thick quartersawn White Oak. I custom fabricate the metal base from 2"x4" steel.
The tabletop was sanded up to 180 grit, water-popping between grits. Rubio Monocoat Oil Plus 2C 'Black' was then used.
Contact us directly if you would like a table like the one in the video
www.hazeloakfarms.com

Хобби

Опубликовано:

12 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@Reza1984_ Год назад

This looks absolutely gorgeous! thanks for making this video

@HazelOakFarms 8 месяцев назад

Thank you! Appreciate the kind words!

@DsHardWoodCreations 2 года назад

Looks really good. Im about use rubio for first time on a walnut table top. Using the pure.

@forrestheaney9059 Год назад

I was skeptical when I read you were staining quarter sawn white oak black but it looks great

@rubiomonocoatusa 4 года назад

Great application video! Love how it came out!

@HazelOakFarms 4 года назад

Thanks guys! We love your finishing products!

@kevinmorin7965 3 года назад

Hazel Oak notice that you didn't do the white ScotchBrite (tm) power buff step? I see that in many other videos on Rubio's Monocoat? So not needed or not needed because of the stain component in this mix? Nice looking table top. Did you consider an ammonia bag fumigation and then just use Rubio Pure?

@HazelOakFarms 3 года назад

It isn't needed. I've done it before, but not needed. Just buff it off with a cotton towel. But make sure you get all the extra finish off.

@ryanandallyplayz5719 4 года назад

How soon after finishing bottom did you wait to flip over to finish top?

@HazelOakFarms 3 года назад

I wait sometimes an hour, sometimes 1 day

@zahidmirza8220 Год назад

Good sir

@jacobmailman 4 года назад

Very nice! What sanding grits did you use? I read Rubio doesn’t recommend above 120?

@HazelOakFarms 4 года назад

Jacob Mailman 180 grit. But I water pop between grits, and use the cleaner.

@RachelWillismydisorganizedlife 3 года назад

You can use above 120 as long as you water pop, use the cleaner and finish with 120 grit.

@matthewskowronek4116 3 года назад

I have a cherry slab I plan on using rubio monocoat on but I'm looking for a walnut finished color. What color rubio would you recommend using to achieve that goal?

@matthewskowronek4116 3 года назад

I have a cherry slab I plan on using rubio monocoat on but I'm looking for a walnut finished color. What color rubio would you recommend using to achieve that goal?

@kylesmith7339 3 года назад

Serious question not trying to be critical. Considering how expensive Rubio is, is there a reason why you initially apply it so heavily to then just work hard to rub it in and wipe it off? Do you find light areas if you try and "stretch it"? Thanks!

@HazelOakFarms 3 года назад

Good question. I just try for an even coat. Sometimes even do two coats on certain woods. I’m not really concerned about cost, but rather a quality finish.

@jeffreymilarsky3246 2 года назад

Yes, but more product does not increase the level of darkness. Much less product would achieve the exact same results. The oil adheres to untreated sanded wood. Once it attaches itself to the grain structure the process is just wiping it off. It is NOT like a traditional wood stain like MinWax, which does get darker after multiple coats.

@vladimirgasic9642 2 года назад

Awesome! Can it be used for cutting boards?

@HazelOakFarms 8 месяцев назад

I don't think you are supposed to use for cutting boards

@trevorlaird6904 Год назад

Is this your favorite color for quartersawn white oak? I am trying to figure which to go with

@HazelOakFarms 8 месяцев назад

Yes either the black, charcoal, or pure

@hernangonzales9602 2 года назад

I wanna do it on a guitar, i want it black, so i can use the pre color in black, and then the black 2C ?

@HazelOakFarms 2 года назад

Yes if you want it really black, use the precolor black and then black or charcoal 2c Here is an example of recolor and then charcoal. www.hazeloakfarms.com/products/charcoal-black-ash-industrial-side-c-table?_pos=4&_sid=330a0a9e7&_ss=r&variant=33880742330504

@krehbein 2 года назад

What would you use for not-flat surfaces like a cabinet. Cotton? Microfiber? Blue paper towel? White pad from Rubio?

@HazelOakFarms 2 года назад

I prefer using a foam brush like this on those surfaces. Then just buffing off with a cheap white cotton cloth

@krehbein 2 года назад

@@HazelOakFarms Do you mean those disposable ones from home depot/lowes? I’ll try that, thanks!

@HazelOakFarms 2 года назад

@@krehbein yes, but I buy soft, dense ones from Amazon. The ones with the wood stick handle. Works great to hold the Rubio, but also apply it sparingly.

@krehbein 2 года назад

@@HazelOakFarms thanks, will try that tonight

@folstad8837 Год назад

Hos did you Connect the boards? Making a similar table myself

@HazelOakFarms 4 месяца назад

Wood glue

@bryanpatton7067 2 года назад

How is this different vs. just applying a common wood stain?

@jaush69 Год назад

This product is applied in one single coat. So there’s no need for a second. In my experience if applied correctly it also leaves a far superior finish to typical wood stain. I personal don’t like traditional wood stains with a urethane coat on top. For me you achieve a better finish in a quicker time. Rubio is the standard in my furniture shop.

@curtismann3649 3 года назад

I’m a year late but I need to refinish a similar size table. Do you think the 350ml size would be enough just for the top surface?

@HazelOakFarms 3 года назад

Yes that should be enough for the top.

@gtp1172 Год назад

He used too much. Do both sides to prevent cupping/warping

@angelruiz3611 Год назад

Wouldn't it be cheaper to seal the Bottom side with something different? Let's say polyurethane?

@HazelOakFarms 4 месяца назад

With this design you can see the whole bottom side. So really it doesn't matter what it costs, it needs to look good.

@gnomacide07 4 года назад

This was “black”?

@RachelWillismydisorganizedlife 3 года назад

The stain will look different on different wood species. The Monocoat website has a color page that will let you see what their over 50 colors will look like on several different species of wood. It's extremely helpful when choosing a color.