No video :(

How i changed the A/C compressor on a 2017 Ford Mustang GT, Touring, GT350 Shelby 5.2l, 5.0l

Подписаться 12 тыс.

Просмотров 15 тыс.

50% 1

In this video, we're going to show you how to change the A/C compressor on a 2017 Ford Mustang GT, Touring, GT350 Shelby 5.2L 5.0L. This is a simple and straightforward procedure, so you should be able to do it yourself without any trouble.
If you're having trouble with your A/C, then this video is for you! In this video, we'll show you how to change the A/C compressor on your 2017 Ford Mustang GT, and take you step-by-step through the entire process. This video is perfect for those of you who are looking to get your car fixed on your own!
Check out my social media!!!!!
Snapchat- / javin
facebook- / regzastar
Insta- / nietojavi
Tiktok-www.tiktok.com...
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
Disclaimer: JVFIX assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. These videos are only for educational purposes and i am not responsible for ANY INJURIES OR ACCIDENTS, DO IT AT YOUR OWN RISK!!!

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@paulconde5463 5 месяцев назад

Good job. I needed to see how to remove the compressor from the top. Thanks.

@JVFIXLLC 5 месяцев назад

I am not gonna lie but it is a bit difficult to get the bottom bolts.

@T_B_Dubs Год назад

I’m not having any temp issues yet. Maybe it’ll blow warm when I accelerate for a brief second. It is however whining only when the ac is running and seems to increase in noise when I accelerate, when dipping down into lower rpms it’ll stop for a moment and start again. Would this be the compressor?

@JVFIXLLC Год назад

yea that could be a premature failure of the compressor. that was actually the issue with this one and we found metal on the accumulator once we removed it.

@landogriffin7250 Год назад

Bro, I wish I could send you a pic of how my compressor looks.. it took a massive crap on my 17 Mustang GT… Do you suggest replacing expansion valve and dryer when doing the compressor also? I’ve had issues with my AC for the last 2 years.

@JVFIXLLC Год назад

I. would replace the dryer too I don't know if u saw in the video but the dryer I removed was heavy and had debris inside I belive from the compressor when it went bad. I would advise you to change dryer and expansion valve as a whole kit and the Autoparts will give you lifetime warranty doing it that way.

@AstroOnPurpleDevil 2 месяца назад

The hose on the side at the start that you need a 13mm for I can’t get out idk what I’m doing wrong I just can’t catch it

@JVFIXLLC 2 месяца назад

yea that actually was the most difficult part i spent like 1 hour to get it out.

@ultradeafyoutube5562 Год назад

Does the dryer have an orientation? I removed mine and it sounds like the "old" one in your video, the dessicant bag is audibly moving when I shake it. I cut it open out of curiosity and noticed looking from the inside that one of the inlet/outlet holes has a filter netting, and the other does not.

@JVFIXLLC Год назад

yea it has orientation if u put it on a different side it will hit on the plastic near it you will notice right away that it's not in the right position

@ZachBourgeois 11 месяцев назад

Will this fit a 2015 mustang gt?

@JVFIXLLC 11 месяцев назад

yea I think is the same

@patricionunezcisterna1930 11 месяцев назад

Hi! I had the same problem with my gt350 2019. That ac compressor fits in mine or is a diference with the vodoo gen2?

@JVFIXLLC 11 месяцев назад

I think it would be a bit different the vodoo gen 2 starts in 2019 and they redesigned alot of things. the only way to know is to talk to the ford dealership or the autozone parts

@patricionunezcisterna1930 11 месяцев назад

@@JVFIXLLC ty! I'll do it

@gaudenciopelayojr3689 2 месяца назад

From Fresno , quote on compressor clutch as well 2019 mustang ??

@JVFIXLLC 2 месяца назад

i would say that one would be close to 880 or a bit more because your model uses the 1234y special freon and it needs a special machine to recover the ac and charge it if it was older it would have been like 500 bucks

@JoshuaBarrera-eg7vb 10 месяцев назад

no need to cut the belt if it is good, stick cardboard if you do not have the tool and turn the crank to walk the belt off

@JVFIXLLC 10 месяцев назад

you are right the reason I cut the belt it was because I was going fast on the job and the belt was already bad. thanks for sharing

@MStrange88 Год назад

My 19 350r isn’t blowing cold air. You know if this would be a warranty repair? It has 13.5k miles

@JVFIXLLC Год назад

It should have u have very low miles. did u buy new or u a second owner

@rcobra36 Год назад

I promise you he didn't put that in by him self it takes two people trust me it's a pain in the ass I rather take a whole engine apart before I do an AC on a 350 ford's bright idea they should have put a rubber sleeve I the bolts to hold them in place!!! Modular engines love them and hate them!!! Fyi you don't have to take all that stuff off just the reservoir and you don't have to cut the belt!! Just unbolt with the compressor ...

@JVFIXLLC Год назад

u actually did everything myself from the diagnostic to removing the compressor myself. after many years of experience you start to find ways to do the job much faster

@rcobra36 Год назад

Years of experience 😂 so why did you take all that stuff apart you didn't have to but I guess is the years of experience 😂 and how did you manage to hold the two bottom bolts let me guess years of experience 😂 chico be truthful to the people...

@JVFIXLLC Год назад

yea but u watched the video for a reason no. I hope it helped u.

@BBallWrldElite 2 месяца назад

Just replaced it all by myself, I had to tape down the bottom two bolts so they stayed in place while starting the top bolt. I did all that from the right tire as I don’t know how you would align it from the top if you can’t see the hole 😂

@hellomynameis20 Год назад

Is this a common issue on this year mustangs? Because my 2016 5.0 has been whining for at least 20k miles but still blows cold

@JVFIXLLC Год назад

yea actually. this car only had like 60k miles, and the ac compressor got destroyed internally, and we had to do a cleaning of the whole system for any debris in the lines.

@throwaway8924 Месяц назад

How did you take the drier off?

@throwaway8924 Месяц назад

I already took off the two bolts but I can’t push up and get it off

@Steel598 Год назад

Do you have to cut the belt?

@JVFIXLLC Год назад

only if u wanna change it I cut it cause it was old but u can just unbolt the compressor and the same force will make the belt go loose

@kingo290 8 месяцев назад

Ford just quoted me $2800 to replace the compressor on my V6 mustang. This will be the third time they’re replacing the compressor. The first two was under warranty. I told them it’s gonna the evaporator core which is a known problem. Shouldn’t have to replace a compressor every 2-3 years. Im gonna find a shop manual and do the job myself. $2800 just to replace the compressor is a huge ripoff to me.

@JVFIXLLC 7 месяцев назад

omg that is insane for this job was about 1200 with labor and parts. if the accumulator was not replaced it could have been clogged and that makes the compressor work in stress alot more

@formdoggie5 3 месяца назад

If it's been damaged since you bought it, then it should still be covered. Call corporate.

@justinsantore5246 Месяц назад

That’s y u never go to ford , I only go for oil change bc if I get rid of it , it shows on carfax etc , I bought my ac compressor w clutch for $188 plus to install it not at ford but a shop I go to everything including labor 500 ish it’s a 2 hour job , ford tried telling me my cabin air filter which is so easy to install nd non expensive would cost me 100 ish for them to do when I did it myself for like 15$ or so 🤣 bunch of money hungry slime balls , they think people are stupid I mean I’m not surprised if they let ford do it , it’s good to do your own research to save $ or to know someone who knows about cars

@justinsantore5246 Месяц назад

This is for my v8 mustang btw

@justinsantore5246 Месяц назад

They do a temporary fix until ur warranty expires 🤣

@idecay-7936 Год назад

How did u remove the Freon

@JVFIXLLC Год назад

I used a machine to do it. if u don't want to spend alot you an go to any shop and ask them to recover your freon.

@hellomynameis20 Год назад

⁠@@JVFIXLLCcan I go to to a shop to remove Freon, then I can do the compressor swap my self?

@danieltorres-kx2yc 11 месяцев назад

Did you have to remove the expansion valve off to flush the evaporator? Did you replace the condenser?

@JVFIXLLC 11 месяцев назад

yea I removed the valve and just flushed it through there

@dcfogle1 Год назад

Is there a way to do it without cutting the belt?

@JVFIXLLC Год назад

u could but it's hard to remove it if u don't have the right tool.

@dcfogle1 Год назад

@@JVFIXLLC what's the right tool?

@JVFIXLLC Год назад

@@dcfogle1 u will need to find it online. it's called stretch belt install tool.

@dcfogle1 Год назад

@@JVFIXLLC thank you

@FernDaawg Год назад

Where are you located?

@JVFIXLLC Год назад

I am mostly mobile in visalia California area

@FernDaawg Год назад

Oh ok. I’m in the San Bernardino county area in Fontana.

@JVFIXLLC Год назад

@@FernDaawg yea it's a bit far way lol

@FernDaawg Год назад

@@JVFIXLLC approximately how long would this take if you’re a still doing this type of work? I have a buddy that lives in Bakersfield so I would consider taking a trip.

@FernDaawg Год назад

@@JVFIXLLC had the compressor replaced with a new one but it blows a fuse when I turn it on.