How I insulated and clad my steel shed 

I love the name of your channel. Gave me a chuckle😆

Great video. Exactly what I am after. A minimalist style, from start to finish, including the tool you used.

Nice job. Good size shed too. Is there any need for any other membrane? Thinking vapour barrier, condensation? And will you be insulating roof? Keep up good work!

Thankyou so much for the only video I can find of cladding the interior of a typical metal agri shed. It’s given me hope that I can make mine not only look better but warm in case I get change of use in planning one day. Thankyou

Apologies if this has already been asked. But did have any issues with cold bridging/condensation?

well insulated by why not use OSB much cheaper than the ply but Jeez Awful Musak, ,

There like fridges in the winter and when's it warm o my days like a sauna

very nice my friend! I also saw your video of Alvor Portugal, good video too. I'll probably go there next week 😊 But you have the comments disabled, I don't know if it was forgotten or if it's on purpose. Have a great Friday

I watched your video and did the strengthen boards in my building. The only difference is I used a full 4x8 sheet of polypro, foil against the metal. I cut a 2 inch strip the length and applied it to the foil side. That way there is a gap between metal wall and foam board. I realize we all are doing the best we can, as there is no "Standard" way. Thank you for your video, you did an awesome job.

Do you have problems with condensation inside your garage

Nicely done sir. The catchy jingle smothers the cussing out too🙂

Nice cameo shot of the young helper. Thanks for the inspiration. Trying to decide on a wood or steel building. Your video is swaying my decision towards steel.

How has it held up 🙂? And how did you attach the insulation, to fit and squeezed it in?

great video, very helpful. Does the insulation fill the whole gap between the tin and the ply or is there an air gap in between?

Great video. Gave me some good ideas for my 12x10foot shed.

Very fast worker

Great video! May I ask how it's holding up a year later? Any condensation? Are you using an AC?

Great job bosco fair play,can i ask what size is the shed?as im looking to buy one in the spring and will need it to be at least 10 feet wide and 14 feet long,your shed looks a decent size,great idea putting the beams in for a more rigid structure and for hanging stuff off

Thanks for sharing. Would there be any need for a moisture barrier and or to tape the joints between the PIR boards?

Great to see someone actually using a hand saw. A dying art, what with so many choices of electrical tools available !

Looks brilliant bro

Great job can you tell me where you got insulation sheets and thickness please

Beautiful Giving me a great idea 👍❤️

Looks great. Better than spray foam shyte. Lose the music....it's awful.

Did you do the roof the same way? Trying to figure out how to insulate my shed corrugated metal roof and dampen down rain now at the same time, any tips? Thanks!

The weakest point is the cross on your ply timber. You should offset them like brickwork. Other than that great job.

Might be a silly question but whats the point in the extra wooden beams? Is it for screwing in the ply after? I am doing this soon with a very similar steel frame shed

Great video , thank you

Thank you for posting this simple, short video…very helpful to have a visual reference.

can i ask did you put the concrete slab down first then build the shed or did you build the shed first the get the slab poured? if you did the shed first how did they do the slab? did they run a pipe in through the door or did they wheel barrow ir in or something?

If you don't mind I know a better way to install the insulation boards...

Are they PIR insulation boards?

So how was the result? Does it stay warm in there?

WHat differences in heat temps did this make? Looks easy to do

Hey mate what did you lay down before the word mate ??

Perfect. Save all the drama. Just let me watch you do it right. Great video!

Great work there B.A 👍🏻👍🏻

How much did all cost

Great video, made me laugh as well, lots of energy. ....from Ireland

worst music. good vid

What did you do with the floor, did you pour concrete after building the shed. I wanted to do that to stop water getting in but not sure if that will block moisture getting out. Did you add a vent anywhere?

Very Very good sar

What are thoes angle brackets you used for the 2x4 ?? I'd like to use the same ones. Thanks.

you screwing ply to strengthening beams?

Took 1 minute before I hit “like” nice job

I'm kinda diggin' the music...

I have water coming in under my bottom rail Every where. American Carpet. Says they don't Gurentee. Water coming in base like wtf. Why build the Garage. Anyone have a anser. I tried silicone still coming in it's Crazy.

Nice work, nice place! 🙂👍 Sorry for my previous comment (nonsense to you) I was wrong in the video I wanted to comment. But you have a great job here, continue with new productions/uploads 👍 Have a great Friday!

By god your no eejit, nice job, my shed arrives in about 2 weeks and I'll be following in your footsteps. Nice job. 👍👍

beams at start of video,whats the dims?2 x 4? Also looking to hang a tv on back wall ,do you think beams/wall would take a bracket and TV ?thanks

Great video and straight to the point, I’m needing a 12metres by 4 metres garage and looking at different options, did you buy this and put it up yourself? Thanks.

very nice!

Are those 4'x8' sheets

How are you finding the insulation. Is there anything you'd change or add to it. Looking to do something similar.

Good job! Well done! What made you use plywood and not plaster board? What sort of insulation is that? Cheers.

what the name of the insulation and wood boards you used?

Can l ask where you got the metal brackets ?

I would have taped up with aluminium foil tape on all the butt joints of the PIR slabs to create a vapour barrier. That is essential.

what was done to fill the spaces formed by the corrugated roof at the eaves of the shed?

Love it. Great job!

So cool, thanks for the video!!

Nice

Very good, thanks 🙏

Very helpful

Like the channel name 😉

Who did you get the shed from?

After 5 minutes I couldn't take it anymore. I can't believe you would let folks see this!

Thanks for posting. I recently had a metal garage erected on a gravel base and am looking at different insulation methods. Also, considering pouring a concrete floor inside at a later date.

Brilliant! Thank you