How I wire AIR RIDE AIR COMPRESSORS reliably and safely...

Подписаться 2,4 тыс.

Просмотров 15 тыс.

50% 1

Viair 2 pack 444c air compressors amzn.to/4c40lL9
Viair 165/200 psi pressure switch
Blue sea 100 amp circuit breaker amzn.to/3T4gWG5
Fused distribution block amzn.to/3V3UuiX
40 amp Bosch relay amzn.to/43dZcNd
round 3 position on/off/on rocker switch amzn.to/3v8aHZR
Cloth tape Tessa harness tape amzn.to/434NjZU
High heat harness tape Tessa amzn.to/3v6MIKz
Flush cutting snips amzn.to/3T2jc0J
16 inch black zip ties amzn.to/3V3UTBZ
***TOOLS and PRODUCTS found on Amazon seen used in this video and on the channel...
www.amazon.com/shop/ltscustom...
As an Amazon Associate I earn from qualifying purchases as a way to help support creating videos on RU-vid.
TO SHOW YOUR SUPPORT AND HELP OUT WITH THE BUILDS:
Check out the channel memberships for additional content, behind the scenes videos, merchandise discounts, and MORE! / ltscustomegarage
Check out the website for even more extras, merchandise, and hand pinstriped by LT art! WWW.LTSCUSTOMGARAGE.COM
www.PAYPAL.ME/LTSCUSTOMGARAGE if you just want to donate to help out the channel or a specific build.
Thanks for all the support! See ya out there!
A walk through of how I install the air compressors in my air ride systems. But first, a cruise in the 64 Impala "Marryellen" and a peak at the home Bar project and as always, entertaining custom automotive fun in the garage for the regular guy!...
Merch and pinstripe art www.ltscustomgarage.com
As an Amazon Associate I earn from qualifying purchases as a way to help support creating videos on RU-vid.

Авто/Мото

Опубликовано:

21 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@blkeclipsel2400 4 месяца назад

So I have the new airlift 3P/3H manifold that has the pressure sensor inside it. A second harness with the relays attached that leads to two (30 amp) fuses for the dual 444C compressors. May switch to 40 fuses. All of which is basically the airlift manufacturer plug and play version of what you just did manually. That just goes to show that you know EXACTLY what the hell you're doing, and this video is gold for anyone who doesn't have a setup pre-designed for plug and play. Hell, it's gold for me, too, because I have a better understanding now of how it works, and I'm going out to get a circuit breaker today because it's the one thing I have missing. Thank you for taking the time to share your knowledge with a video, I wish I could like it more than once.

@LTscustomgarage 4 месяца назад

Thanks for that sir! Glad I can be of help in any way. Good luck with you project, and make sure to have fun! 🤙

@blkeclipsel2400 4 месяца назад

@@LTscustomgarage well deserved, Sir. I've had air suspension for going on 3 years, but it's time I redo my trunk setup. Those bundles of cables intimidated me a little, so I looked up a few videos to jog my memory. This is the best one I've come across and seeing as how it's identical to my setup on my daily, and I've had no problems, I'd say the most reliable. Your video simplified everything, and a few light bulbs went off in my head "oh so that's what that's for," lol. It's all fun until something goes bad and you have no idea how to fix or service it. This knowledge will help me diagnose and/or replace components should I run into any electrical issues in the future.

@LTscustomgarage 4 месяца назад

Thanks, and yeah, reliable and serviceable! It's all in the install. Plus, the more you know, the easier you can get out of trouble 😆

@ocg626 5 месяцев назад

Thank you! You gave me an idea as to how to go about my set up, how to wire up the components i was clueless. 😂 thanks again

@LTscustomgarage 5 месяцев назад

Hey, I'm glad it helped you out! Good luck with your project 🤙

@vauxbuilds991 9 месяцев назад

Thank you so much! Finally found your video after watching just about everything out there and your wiring setup is exactly what Ive been after.

@LTscustomgarage 9 месяцев назад

Hey my pleasure! Thanks for watching. Glad it could be of help to ya.

@CityHighKustomz 2 года назад

The best wiring video I've seen! thanks.

@LTscustomgarage 2 года назад

Thanks! Glad to hear you liked it. I don't do much for how to videos, but thought id put my advice out there about this. I hope it helps some people out.

@andymarsh_64GANG 3 месяца назад

I’m looking to bag my 64 Belair. This video is super helpful and I’m going to use it when wiring up the compressors. Good work.

@LTscustomgarage 3 месяца назад

Oh nice, I miss my 64 impala so much. Good luck with your project, itll be a cool one.

@ldc4701 2 года назад

Enjoying the channel Bro! Awesome Luv killer work!

@stickbogart3657 11 месяцев назад

HEY LT keep up the good work I love the way you explain things to people you are very informative don’t stop. ❤❤❤

@BreezewayCocktailHour 10 месяцев назад

That's so helpful and clear. Thanks a bunch.

@LTscustomgarage 10 месяцев назад

Glad it could help ya! Thanks for watching

@richardsandidge8954 Год назад

I can't tell you how much it helped me on my '55 Buick Super hardtop ! This will be the first time doing air ride system. I had an accident in 2007 and had brain surgery ! I have to read things two or twenty times to get it right. Your example was super helpful and very professional ! I have subscribed to you channel....will send some photos as I go forward, Thanks

@LTscustomgarage Год назад

I'm so glad I could help! And thanks for the sub! If you need to, don't hesitate to ask me a question along your journey. I'll gladly help if I can! Good luck with your project!

@cheapandeasymods 11 месяцев назад

Great job! I'm about to play around with front and rear airbags. So, this is very helpful great video!

@LTscustomgarage 11 месяцев назад

Thanks! Glad this video could help you out! Good luck with your project!

@ldc4701 2 года назад

Luvin the channel! Awesome Luv and killer craftsman ship!

@LTscustomgarage 2 года назад

Thanks! And thanks for watching too, glad you're enjoying it

@nissans13ks1989 7 месяцев назад

Your great. Thanks for the informative video it answered a bunch of questions i had bumpin around in my head.

@LTscustomgarage 7 месяцев назад

Glad it could help ya! Thanks for watching

@matterwin2851 6 месяцев назад

Thank you for the video. That was very informative.

@LTscustomgarage 6 месяцев назад

Hope it can help ya out! Thanks for watching

@davidadamkemp7302 2 года назад

Man, these are fantastic!

@LTscustomgarage 2 года назад

Thanks! It's fun making them

@davidadamkemp7302 2 года назад

@@LTscustomgarage i know a guy that loomed up the wires for his discman and tape adapter back in the day. So if you were rockin' out to beatnuts or krs1 and things got out of control, those wires were protected ,:)

@LTscustomgarage 2 года назад

@@davidadamkemp7302 🤣 that made my day! You're talking 25 years ago!

@stickbogart3657 11 месяцев назад

❤❤❤ maybe one day I’ll be able to show everybody my air compressor system that’s in the toolbox of the bed of my 2020 to pick up truck ❤❤❤ I spent a lot of time at a lot of money just so I have impressive extremely loud airhorns for my pick up truck. I actually have six compressors, but only room for 4 of them in my toolbox in the bed of my pick up truck. ❤❤❤

@stickbogart3657 11 месяцев назад

❤❤❤ I love your quality of work kind of reminds me of me myself of what I do I have a 2022 Nissan frontier crew cab pick up truck with a set of Hadley air horns in the grill and I have four of those compressors in the toolbox of my pick up truck I would love to be able to send you a picture of my system that I personally custom built I have two gauges in the cab of my truck that monitor the air pressure that’s in the tank and it also has a second needle on the air pressure gauge that monitors the amount of pressure that’s been released to the air Horns. ❤❤❤

@lightofscorpio 11 месяцев назад

i did my first install of a air suspension system by myself back in 2017 and yesterday i started up my car and the pump didnt power up to fill the tank. being able to visually see how you connected everything helps me diagnose whats wrong with mines. after seeing this, i need to check my pressure sensor.. thanks for this

@LTscustomgarage 11 месяцев назад

Glad it could help you out! Good luck with your diagnosis!

@lightofscorpio 11 месяцев назад

@@LTscustomgarage turns out it was a power wire after the main fuse off the battery.. very simple, but i only realized it after swapping my compressor, relay, and pressure switch lol

@LTscustomgarage 11 месяцев назад

Glad ya got it fixed!

@Yhung4Kash Год назад

I gotta get to know you😂 your rides look like I want mine to look. they have been work but the biggest thing is I’m 22 years old and my cars a 75 and 85 and RU-vid came out in like 2006😂

@LTscustomgarage Год назад

It's all about momentum, keep workin on em!

@jamesdyer7535 2 месяца назад

Awesome information I have a 2005 mustang gt that has Airlift performance V2 system, my question is What's best way to wire it to where I have a separate on/off toggle switch to keep air compressors off at firt cranking car so to not drain the battery while compressors are filling air tank? I would like to integrate what you did to my V2 system. any info you can give me would be highly appreciated. again thank you in advance for if nothing else this very important video...

@LTscustomgarage 2 месяца назад

Not 100% sure, dont have a lot of experience with that, but from what I remember about that system, there's a gray 20 gauge compressor relay output wire. You can interrupt that with a switch before the relay.

@Bacardibombillo 11 месяцев назад

Great, great video. What amp # fuse breaker should I use? if Im running double VAIR 444 compressors.

@LTscustomgarage 11 месяцев назад

They can draw 30 amps each, so you can run a single 4 Guage from the battery protected by at least 60 amps, then distribute to each and fuse them at 30 amps, or run a pair of 8 gauge wires to the battery with a 30 amp fuse on each. Here's a good reference for wire size as well. www.bluesea.com/support/articles/Circuit_Protection/1437/Part_1%3A_Choosing_the_Correct_Wire_Size_for_a_DC_Circuit

@Drake38555 2 года назад

Very clean set up. Thanks for the video! One thing I might suggest that I see other people do, is to provide affiliate links or parts lists in the description box. I went through and googled the Tesa tape that I had never heard of (thanks) and threw other parts in my shopping cart as you went through the video, but links can be helpful to us trying to replicate something you are doing (exact gages, brands, amps, etc) and I think you get pennies here and there when we buy something through Amazon or whereever through your link or influencer page/account is what they call it. Just a suggestion, but by no means a critique. Thanks!

@LTscustomgarage 2 года назад

Glad you liked my video and it could be a help for you! And thanks for the advice! I'll definitely be doing that from now on, I should go back and add them to this video too. It's a good idea. Keep on truckin!

@Bruno-ys3xd 2 месяца назад

What type of distribution block did you use in the video the one in the des. Isnt the same i do like that one you are using with the prongs

@LTscustomgarage 2 месяца назад

Here ya go. amzn.to/3y3HIb0

@stickbogart3657 11 месяцев назад

🍺🍺 I wish I could send you a picture of what put together by myself for my air compressor system 4 VIAIR compressors that operate just my air horns. It takes a very short period of time and I mean a very short period of time to pump up the air pressure in my 2 1/2 gallon tank all the way up to 200 psi from zero I have pumped it all the way up to 250 psi I did not blow off any of the hoses. I really wish I could show you a picture of my system. Everybody would be blown away. ❤❤❤❤❤❤❤❤

@stickbogart3657 11 месяцев назад

🔥🔥🔥 I’ve got a lot of experience doing custom builds years ago I worked for Wellcraft, marine building, offshore, racing boats I built 3 38 foot scarabs, installing the engines and the electrical and the fuel system as well as generators in other boats but I built 3 38 foot scarabs for the Miami Vice TV show starring Don Johnson. You would be impressed with the air compressor system that I put together for my 2022 Nissan frontier pick up truck. Everything is in the toolbox in the bed. Nothing is underneath of the truck. 🔥🔥🔥🍺🍺

@bajafishtaco Год назад

The pressure switch is just using ground connections ? One from the relay and one to the ground on the truck?

@LTscustomgarage Год назад

You can run either ground or 12v through a pressure switch. You can connect one side of the pressure switch to ground, and run the other to either pin 85 or 86 on a Bosch style relay, then 12v on whichever 85 or 86 that isn't connected to the pressure switch. OR 12v through the pressure switch and ground the other side of the relay. The relay just needs to see opposite polarities on pins 85 and 86 to work, 12v and ground

@bajafishtaco Год назад

@@LTscustomgarage ok so the pressure switch is on /off for the compressors by completing the circuit . So when the pressure is low it signals turn on to complete the circuit and when the pressure is proper it kills the connection to the circuit .

@LTscustomgarage Год назад

Yup, say you have a 160 on 200 off pressure switch with ground on one terminal,, when you tank pressure is below 160 it'll close and send ground to your relay. And shut off at 200 psi

@stickbogart3657 11 месяцев назад

❤❤❤ my system works with those for air compressors for my airhorns. I know it sounds overkill, but it only takes seconds for me to get 200 psi for my airhorns. It’s kind of an insurance policy that wakes people up to get too close to my truck when I. ❤❤❤. I have one air pressure switch that turns on to compressors and then a second air pressure switch that turns on the second pair of air compressors. The reason I said it up this way if I only need to I can flick one switch on if I need rapid recovery and I hit the second switch I have for compressors charging by 2 1/2 gallon tank in the toolbox that’s in the bed of my truck. ❤❤❤ ❤❤❤ if you’re familiar with the Miami Vice TV show with Don Johnson he ran around in a 38 foot Wellcraft scarab back in the day I worked for Wellcraft Marine and I install the engines and the electrical system on all three boats that were built for that TV show. ❤❤❤. I’m sure you would love the layout of my air compressor system that operates my airhorns. I know it’s overkill but it’s certainly wakes up the stupid people on the freeway when they come way too close to my new pick up truck. Usually they think an 18 wheeler is getting ready to go up their ass if they don’t get back in their own lane.❤❤❤.

@stevenlight8929 10 месяцев назад

Check out the hot lips soldering iron. I won't use anything else

@LTscustomgarage 10 месяцев назад

I've never tried one. It's a pretty pricey unit isn't it?

@stevenlight8929 10 месяцев назад

@@LTscustomgarage yeah, my old job supplied them. I found a older model that works the exact same for around $100 give or take on eBay. Well worth the $ to me

@PeachCoastLowrider Год назад

I have two compressors , can I run one big 2 gauge wire from batt to trunk and use a distribution block to run power to amplifiers and the compressors? or is it best to run two separate power wires ? 1 for amps and 1 for compressors?

@LTscustomgarage Год назад

Technically, you can, but its probably better to separate them if you can. I'd be more concerned about your ground. You can end up with lots of noise issues with your stereo. Like popping through the speakers when hitting your switches or noise while your compressors are running.

@PeachCoastLowrider Год назад

@@LTscustomgarage ahh didn't think of that , thanks ! also I'm using 8 awg welding wire currently to 2 viair compressors. think it's enough? it's what was recommended

@LTscustomgarage Год назад

@1Colburn 8 awg is good for one, I'd run at least 4 awg to a distribution point or 2 8 awg the whole way. It also depends on how far your run is from the power source. The further away the bigger your wire should be to prevent voltage loss

@PeachCoastLowrider Год назад

@@LTscustomgarage hmmm funny bc AVS told me 8 fine for 2 comps. been working good for 2 years now . but can make my engine idle low and lights dim a lil . about 17 ft from bat

@LTscustomgarage Год назад

@1Colburn oh yeah, itll be fine, but they can draw up to 30 amps each. 60 amps through 17 feet of 8 awg is kind of a lot. So if I'd suggest if youre redoing it, to step it up a bit. Could be why your lights are dimming, or ground, or both.

@Kloco78 9 месяцев назад

So you can hook up two compressors to one pressure switch?

@LTscustomgarage 9 месяцев назад

Yup. The pressure switch just gives you a trigger for relays and can be used to trigger multiple relays

@JrRankingMusic 2 месяца назад

@@LTscustomgaragehow exactly was the ground wired at the relay side? Did it go straight from the relays to the pressure switch and then from the pressure switch to the compressors? I couldn’t tell where the one ground that you put on the B-pillar was coming from for the relays. Thank you for taking the time to make this video and you taking the time to answer these questions! 🫡

@LTscustomgarage 2 месяца назад

@JrRankingMusic basically, I run ground into the pressure switch, from there to pin 85 on the relay. 86 is 12volts from the rocker switch, pin 87 is 12 volts from the battery, and pin 30 is 12 volts out to The compressor and it has its own ground.

@JrRankingMusic 2 месяца назад

@@LTscustomgarage thanks 🙏🏽

@isiemer 2 года назад

Why use both the circuit breaker and the fuses?

@LTscustomgarage 2 года назад

All the components wiring should be protected as close to the power source as possible, so the circuit breaker is near the battery and big enough for all the components at the same time. One larger wire can run back to a point where all the components can be fuse protected individually with their appropriate size fuse.

@stickbogart3657 11 месяцев назад

❤❤❤ HEY LT I would love to know if you have a website where I could send you a picture of my air compressor system that uses 4 ViAIR air compressors. I’ve pumped my system up to 250 psi just to do the extreme pressure test and none of my airlines broke loose. I left it at 200 psi for 20 minutes to make sure nothing came apart. Please post your website if you have one. I look forward to seeing your website if you have one love to get connected with you. LT. Make it a great day just think about having 4 VIAIR compressors just for your airhorns yes, it’s over KILL but it wakes the dead and the stupid. ❤❤❤

@LTscustomgarage 11 месяцев назад

I don't have a website now, someday I will. I do have a Facebook page though

@LTscustomgarage 11 месяцев назад

Thanks for watching! I'm glad you enjoyed it. I would like to see your air horn set up. Oh, and I sure do remember watching Miami vice as a kid!

@stickbogart3657 11 месяцев назад

@@LTscustomgarage you should see my air compressor system from my pick up truck I brought 6 VIAIR air compressors 4 of them are in the toolbox in the bed of my truck just for my airhorns. Yes I can connect the hose to it and blow up Tire, but I bought them to activate my air horns and they are extremely loud. And best way protect your vehicle is wake up the dead before they hit you.

@LTscustomgarage 11 месяцев назад

I love air horns lol sounds like yours is a lot of fun

@garystevens1044 Год назад

Hey cool.setnup.let me know how ya like your air tank blowing up!!!!! Or are you rounding from pumps to bags.... Other wise BRO WHERES YOUR DAMNED PRESSURE SWITCH?????

@LTscustomgarage Год назад

You should probably watch the video again and actually pay attention. I run ground, sometimes 12v through a pressure switch and a toggle switch to my relays and it was mentioned more than once. I'm not sure what you mean by rounding from pumps, and btw they are NOT pumps, they are air compressors, pumps move fluid. Do you really think a pair of viairs would blow up a tank before tripping a circuit breaker, blowing a fuse or burning themselves out? Pretty cool you think you know what your talking about though, wish I knew you In the late 90s when I started doing this stuff, maybe I couldve learned from you and skipped the whole 25 years of experience I had when I made that video, I couldve been an expert right away. Btw if you're going to be a troll atleast try to know what you're talking about so you don't look like a complete fool.

@Kloco78 11 месяцев назад

Shop supply’s 😂😂😂😂😂

@LTscustomgarage 11 месяцев назад

Top of list that day 😆

@Kloco78 11 месяцев назад

@@LTscustomgarage this is the most In depth helpful video on this subject on RU-vid thank you sir I really appreciate it

@LTscustomgarage 11 месяцев назад

@Kloco78 thank you, I'm glad it could help you out! Any questions, don't hesitate to ask.

@Kloco78 9 месяцев назад

I actually used this video to hook up train horns in my 1979 LTD.

@LTscustomgarage 9 месяцев назад

Perfect car for train horns 😆