Тёмный

How MOMMA Repairs Headlights BACK TO BRAND NEW in 3 Minutes 

Sweet Project Cars
Подписаться 492 тыс.
Просмотров 3,1 млн
50% 1

Polish and Shine and remove Dull headlights, fast. Works on all plastic headlight lenses. goo.gl/z9TrgR
________________________________________________
If you would like to help us out.
www.paypal.me/YourSweetProjec...
________________________________________________
**********************************************
Here we show you in 3 minutes per headlight how to use mothers aluminum polish to make them look NEW! Then use 303 2 to 4 times a year and they will NEVER YELLOW OR FOG UP AGAIN
Plus you can make $$$$$ money doing this for others :)
NOW if you have Yellowing Headlights or PEELING CLEAR COAT and Mothers does not do the job you will need to do this video • How To REMOVE Yellowin... **
____________________________________________
USA Tools:
Protective coating: goo.gl/z9TrgR
Mothers amzn.to/2C18A9Z
3M 8" Foam Pad amzn.to/2AWATFU
Dewalt Polisher: amzn.to/2JEBDnw
3M Hookit Pad amzn.to/2AWZIll
Micro-Fiber amzn.to/2zcYNA3
Micro-Fiber 20 amzn.to/2yTPhgR
Hand Drill kit amzn.to/2npmXl9
UV Condtioner 16 oz: amzn.to/2jCHktN
UV Condtioner 32 oz: amzn.to/2zTBRms
UV Condtioner 1 Gallon: amzn.to/2FCzWIP
UV conditioner 4 Gallon: amzn.to/2A8ZhqF
___________________________________________
UK TOOLS
Dewalt Polisher amzn.to/2GIuOjt
Mothers amzn.to/2FGYbkI
Micro Fiber amzn.to/2E8LNgq
3M Pad amzn.to/2uOP39M
Spray Bottles amzn.to/2GLolEa
303 UV amzn.to/2p7q9zH
Venom amzn.to/2I35V3a
_____________________________________________
Germany Tools:
303 UV amzn.to/2KL1Il5
Mothers Metal Polish amzn.to/2H3r0JN
Dewalt Polisher amzn.to/2nXIf6B
Microfiber amzn.to/2nX4864
3M Foam Pads amzn.to/2EgiOYO
3M Wool Com Pad amzn.to/2nX4ABi
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this RU-vid channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

Авто/Мото

Опубликовано:

 

24 июн 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 3,3 тыс.   
@jerrycosme4273
@jerrycosme4273 Год назад
My daughter has been complaining to be me, that she has to use her high beams at night cause her headlights were dull and faded. So I tried your method. WOW! what a difference. Not only does it look new, its also safe for her to drive at night without using high beams.. Thank you so much.
@SweetProjectCars
@SweetProjectCars Год назад
Our pleasure Jerry!! Thank you so much for watching and sharing your stupendous results, we really appreciate it, hope you have a great week my friend. mad Mike the hammer SPC
@JoseMunoz-yg5qx
@JoseMunoz-yg5qx Год назад
Excellent
@billybobbob3003
@billybobbob3003 3 месяца назад
@@SweetProjectCars everyone has an air compressor powered buffer wheel.
@nickstosz6730
@nickstosz6730 5 лет назад
I've tried every hack out there to restire the lights on my 08 tundra. Minimal results and repeating process made me order new headlight assemblies from rock auto. Long story short, came across this video and figured what the hell. New headlight assemblies are on way back to rick auto and my headlights look better than new. You sir deserve a Nobel Peace Prize for saving the millions struggling over foggy headlights.
@SweetProjectCars
@SweetProjectCars 5 лет назад
Nick Stosz thank you very much we truly appreciate that my friend :)
@joeyb7373
@joeyb7373 5 лет назад
Thank you for all the tips good job
@ns671fr
@ns671fr 5 лет назад
This trick has been known for a long time I'm surprised not many knew about it. It's basically a compound.
@SweetProjectCars
@SweetProjectCars 5 лет назад
@@ns671fr there is nothing like this amzn.to/2C18A9Z on the market my friend
@Harlanmote
@Harlanmote 5 лет назад
Nick Stosz Rock Auto has little to no customer service.. No service after the sale.. They won’t answer E-Mails or Phone calls. At least they didn’t for a friend of mine.
@matmanwilliams
@matmanwilliams 7 лет назад
Worked Great! I love how so many are getting offended in the comments, most of us are just trying to touch up the family minivan not our Shelby Cobra.
@SweetProjectCars
@SweetProjectCars 7 лет назад
lotta mean jealous trolls out there
@franciscolepe9252
@franciscolepe9252 6 лет назад
Sweet Project Cars is very good work and very smart Thnaks
@JC-mx1mk
@JC-mx1mk 5 лет назад
It's not so much they are offended, some of us are professionals and know first-hand that Mother's aluminum polish won't work on most headlight deterioration. At least not long-term since it does not contain any UV properties. But hands down it looks great!!
@SweetProjectCars
@SweetProjectCars 5 лет назад
@@JC-mx1mk my friend we no mothers has no UV protection that's why we use the 303 and this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hD2CKp9mco0.html for the ultimate protection :) TY mike
@JC-mx1mk
@JC-mx1mk 5 лет назад
@@SweetProjectCars I'm sorry but my reply was not directed at you but "matmanwilliams", trying to explain that we are not offended. it's our professionalism that comes out when strong statements are made.
@DGA2000
@DGA2000 5 лет назад
It sure is refreshing to see an honest guy cut to the chase and eliminate the BS. Whenever I have a car/truck issue you're the first guy I go to. Thank you for sharing your tips and tricks and saving me money too!
@paulrenaud8286
@paulrenaud8286 5 лет назад
I had some silver polish in my cupboard and thought what the hell, I'll give it a go on my extremely foggy vw Golf headlights. Wow! 2mins later and they look like brand new sparkly clear headlights. Thank you so much for taking the time to share this info with everyone.
@plektosgaming
@plektosgaming 2 года назад
We used to use the (I'd swear it's the same stuff) paste marketed for polishing instruments back in high school for stuff like this. It's great for so many things. Do wear gloves, though. Also, it WILL permanently ruin most clothes it gets on.
@mdgraystone
@mdgraystone 6 лет назад
I nominate Sweet Project Cars for RU-vid Creator of the Year Award. Your videos are great, never too long or promotive of certain "paid" products and truly honest. They wow me. Thanks!
@SweetProjectCars
@SweetProjectCars 6 лет назад
Michael thank you very much my friend for your support, we try really hard to keep it real and to the point as novice video creators.
@Craig-fg1hm
@Craig-fg1hm 5 лет назад
I second that!
@hniziolek4884
@hniziolek4884 4 года назад
Lol good thing you added that “gals” in there. Cuz I’m a 50 yr old mother of twins, married and “I” do all this stuff. 😁 doin it today.
@SweetProjectCars
@SweetProjectCars 4 года назад
glad we could help you my dear ...mike
@johncarmichael1299
@johncarmichael1299 3 года назад
haha, that was my first thought how quick he got 'Gals' in.
@SweetProjectCars
@SweetProjectCars 3 года назад
We have women man kids all watch our videos and they all deserve the same respect have a great day
@joykelly440
@joykelly440 3 года назад
Me too! 52 mom of Twins & a 17 year old. LOL! Doing it myself! My daughter is driving my old Honda & I'm going to teach her how to restore her headlights after I do mine;)
@dougmason3274
@dougmason3274 6 лет назад
I had a plastic skylight that looked just like your demo car headlights. I decided to give your tip a try. WOW! What a difference. Thanks for the great tip!
@kwbalance108
@kwbalance108 4 года назад
How long did it stay clear for you?
@michaelrixon4608
@michaelrixon4608 5 лет назад
I didn’t have a electric polisher. But I gave it a try and used a micro fibre cloth to buff the mother’s Polish off. Bit of elbow grease, took about 10 min. Wow amazing, blown away. Thanks, greatest advice ever, can’t wait to see your other tips.
@SweetProjectCars
@SweetProjectCars 5 лет назад
Good Deal glad we could help you my friend
@sly1415
@sly1415 7 лет назад
did this this morning to wife's Lexus and what a difference, I bought all those other kits but this is by far the fastest and easiest way. thank you for introducing me to 303
@InspirationalMicrophone-uf9gs
@InspirationalMicrophone-uf9gs Месяц назад
What is the 303
@grailph
@grailph 5 лет назад
I will definitely try this on my dad's car. I've been looking into using the different grit wet sanding route but you sir has given me a better path :)
@amburrosedesigns9752
@amburrosedesigns9752 2 года назад
Just did this with my 2010 Toyota Yaris! OMGOODNESS they were so completely yellow covered, you just couldn’t even make out the lights behind them. This worked so well! Some things I discovered though is since I’m a small framed female handling that large buffer took practice! My headlights were so bad off that it took about three applications on each headlight, but so proud of myself for accomplishing the task, and so grateful for your experience,guidance, and expertise to get both headlights done in 20 minutes flat! YAYYY!!! Thank you so much again!
@SweetProjectCars
@SweetProjectCars 2 года назад
Awesome, Ambur! So glad we could help, thank you for watching and sharing your fantastic results, have a great day my friend. mad Mike the hammer SPC
@danielg7532
@danielg7532 Год назад
Just did this today. It worked just like u said. Very simple & the results were just what I wanted!!
@seanmcd72
@seanmcd72 5 месяцев назад
Sanding would have been quicker!
@lowriderrt2000
@lowriderrt2000 7 лет назад
I just did this today to my Jeeps 17 year old yellow and faded headlights. They look new again! Amazing!
@thurm101
@thurm101 7 лет назад
lowriderrt2000 They really do? I need to buy some and try this out. My Honda 6 years old needs this.
@lowriderrt2000
@lowriderrt2000 7 лет назад
thurm101 I can honestly say this works. I thought for less then $8 what did I have to lose? It's way cheaper then buying new headlights. I even did my taillights.
@chawkijmxxcoui2564
@chawkijmxxcoui2564 6 лет назад
+lowriderrt2000 XX l
@leandrorodriguez3896
@leandrorodriguez3896 6 лет назад
What supply need to buy for this
@joegonon2571
@joegonon2571 3 года назад
K
@tinak.3022
@tinak.3022 5 лет назад
You have no idea how much money and time you saved me. Thank you for posting such a useful video. Btw, I’m a brand new subscriber.
@JON_HER
@JON_HER 6 лет назад
Wow this is great man!!! Straight to the point no bullshit!! You’re the man 👊🏾
@SweetProjectCars
@SweetProjectCars 6 лет назад
jonathan rodriguez thank you so much for those great comments it makes it all worth it for all the time and effort it takes to do these videos to help great people like yourself please share our channel if you get a chance thank you again
@mikebaker7964
@mikebaker7964 4 года назад
I finally bit the bullet and cleaned up my headlights using this process. Mixed results for me but I think that's user error, so I've learned a lot! First headlight I didn't keep moving the polisher enough so heated up a small spot on the headlight too much so it burned slightly....second headlight looks amazing, so thanks for the amazing video :)
@vanished3306
@vanished3306 3 года назад
This really works, even doing it by hand without the buffing wheels will make a huge difference!
@SweetProjectCars
@SweetProjectCars 3 года назад
Glad to hear!! Thank you so much for watching and sharing, we truly appreciate it PJ! Have a great day my friend. mad Mike the hammer SPC
@janner2121
@janner2121 5 лет назад
Sweet ! Just ordered some mama's to get my lights fixed. Cheers that man
@danbgt
@danbgt 16 дней назад
Just tried this on my 2013 Toyota Tacoma. It works. Not quite as fast as it looks, but in total time with getting tools out and putting this away. Took about an hour. No biggie. I used a foam pad on my drill, made two passes on each light and finished up with a soft buffer pad and a couple of coats of McGuires UV headlight protectant. I already had the Mother’s. Great stuff. Headlights don’t look like they just came out of the showroom. But they are clear and bright. 👍
@SweetProjectCars
@SweetProjectCars 12 дней назад
Great to hear! Thank you so much for watching and sharing your fantastic results, we really appreciate it, hope you have a sweeeeet week my friend. mad Mike & team
@stevenbaxter8452
@stevenbaxter8452 4 года назад
This was the first of your videos that I watched quite awhile ago. I’m so happy I finally broke down and bought the right tools to make this project and future others possible. Thanks so much for making these videos, plus including the shopping lists. You guys rock!!
@stevenbaxter8452
@stevenbaxter8452 4 года назад
FYI, my wife’s very pleased with her “new” headlights.
@django1
@django1 3 года назад
One of my favorite RU-vid videos. Right to the point. Very informative. And this works very very well. I have had success using a micro fiber bonnet on my polisher but definitely recommend the waffle style foam pad so as to minimize the heat issue. I used to wet sand headlights to restore them. Not anymore. This just kicks ass
@SweetProjectCars
@SweetProjectCars 3 года назад
Thank you very much, our pleasure to help! Have a great day. mad Mike the hammer SPC
@arthurgiannakis2156
@arthurgiannakis2156 6 лет назад
Was inspired to try this. Got the Mothers Aluminium polish today ($16 AUD) and used my drill gun and rotary buffing pad. Both headlights on my car were lightly oxidised and hazy, all around each visor. Took longer than 3 minutes because I took the time to mask off the adjacent panels and wipe the headlights at various times to check progress before continuing on. Let me tell you, this really worked. No sanding at all. Took me 30 minutes to do both headlights. I'd never go back to sanding these ever again and I certainly wouldn't pay anyone else to do it. This works!
@SweetProjectCars
@SweetProjectCars 6 лет назад
Arthur that's great to hear and thankyou for your testimony :) thank you very much for the great comment and we appreciate you being here with us...:)
@soroilo2003
@soroilo2003 6 лет назад
how long does it last
@jonp4495
@jonp4495 5 лет назад
I just did this an works mint , they do headlight resto from $45 , I bought everything for under $30 , and thanks to this legend I now know how to fish 👍thanks heaps
@SweetProjectCars
@SweetProjectCars 5 лет назад
jon p and just think you may be able to do a friend or family members lights and pick up a 20 spot for doing them :)
@ItzzVaderr
@ItzzVaderr 6 лет назад
It came right out. Was astonished with the results, cant believe I did it all in 10 minutes. The results are like night to day. Thanks!!!
@SweetProjectCars
@SweetProjectCars 6 лет назад
Thank you Jonathan glad to hear that have a great weekend my friend
@javierduran1390
@javierduran1390 6 лет назад
I'm so glad I found this channel. I have restored my dash cover, my leather seats and now I just finished restoring my headlights. Thank you sir for posting honest videos that work.
@SweetProjectCars
@SweetProjectCars 6 лет назад
Javier Duran you are very welcome my friend :)
@paulc7572
@paulc7572 5 лет назад
This is the best video I have seen, on restoring headlights by far.. awesome job...
@JM-bt1jq
@JM-bt1jq 6 лет назад
Thank you! Used your techniques on my 2004 Accord. Thanks to this video, along with a windshield cleaning and a defogging video, my night driving visibility is just about crystal clear! Grateful for you.
@SweetProjectCars
@SweetProjectCars 6 лет назад
we are very glad to hear that and glad we could help you my friend :)
@daviddrew4371
@daviddrew4371 6 лет назад
JA MO 8
@karlthomson9894
@karlthomson9894 3 года назад
Literally my jaw dropped, You are a boatload of help thank you!
@SweetProjectCars
@SweetProjectCars 3 года назад
Glad we could help you Karl! Have a great day, and thanks for being here with us! mad Mike the hammer SPC
@nickkatsoulakis6103
@nickkatsoulakis6103 3 года назад
Just did this on my 2001 996 yellowing “fried eggs” and it worked to get the yellow out. Definitely quick and easy. Can’t compare to the multi step sanding and then polishing since I’ve never tried it but I can definitely say they look better if not “perfect”. But sometimes “better” is good enough. Thanks for the tip! Cheers
@SweetProjectCars
@SweetProjectCars 3 года назад
Awesome Nick! Thank you for watching and sharing your results, we really appreciate it. Hope you have a great day my friend. mad Mike the hammer SPC
@03190141
@03190141 3 года назад
This method is the bomb! My daughter's car headlights were actually yellow, and your method made them clear as a bell! Much mahalo for passing on the knowledge.
@SweetProjectCars
@SweetProjectCars 3 года назад
Great to hear Rico!! Thank you so much for watching and sharing your awesome results. Hope you have a fantastic day my friend. mad Mike the hammer SPC
@Petite43
@Petite43 5 лет назад
I'M SO HAPPY I FOUND YOU!! I'M A 55 YR. WOMAN ON A BUDGET, NOW I CAN GIVE MY CAR SOME MUCH NEEDED TLC. !! I WAS PLANNING TO WASH IT TODAY OR TOMORROW, I SAW YOUR OTHER VIDEO ABOUT CLEANING THE SEAT! AND YOU DID AN GREAT JOB WITH THE CHEAP PRODUCTS, I SAID TO MYSELF LET ME CHECK OUT THE OTHER VIDEOS... YAHOOOOOOOOOOOOOO... THANKS AGAIN FOR LOOKING OUT FOR PEOPLE LIKE ME ON A BUDGET.. YOU HAVE A NEW SUBSCRIBER !!
@SweetProjectCars
@SweetProjectCars 5 лет назад
very glad we could help you
@carolharris176
@carolharris176 5 лет назад
Fantastic worked great after trying a lot of different methods
@spyda4932
@spyda4932 5 лет назад
You guys rock - just did this using the manual elbow grease method - what a huge difference. Thanks heaps
@benficahaz
@benficahaz 5 лет назад
Spyda, how long did it take ? Approximately
@paulperkins3143
@paulperkins3143 6 лет назад
WOW!!!! I can't believe how well this worked! I work in a parts store so I had some of this on the shelf. I didn't think to take before pictures but I can honestly say that I am flabbergasted!!!!! Thank you so much for this.
@SweetProjectCars
@SweetProjectCars 6 лет назад
Hey glad this work for you paul please share our channel and let other people know about us we’d appreciate that have a great night my friend
@kwbalance108
@kwbalance108 4 года назад
How long did it stay clear for you?
@chuckneal5828
@chuckneal5828 6 лет назад
i have tried EVERYTHING tooth paste rubbing compound wd40 sanding very frustrating then i see this MAMA repairs headlight so what the heck i go buy a buffer 10amp verispeed buffer pads and some mothers as i was putting the mothers on i was thinking NO WAY well i took the buffer to it and WAY ! THANK YOU THANK YOU works like a champ really and yes mind is blown i keep going out and lookin at my silverados shiny headlights i cant believe it!!!! thanks again
@SweetProjectCars
@SweetProjectCars 6 лет назад
Chuck thank you, very much for the great and kind comments, we are very glad you are here with us :)
@ashleyedwards9424
@ashleyedwards9424 5 лет назад
How long does it last?
@SweetProjectCars
@SweetProjectCars 5 лет назад
@@ashleyedwards9424 it last for years if you use the UV conditioner shown in the SHOW MORE of the video description :) TY Mike
@bugsbunny4648
@bugsbunny4648 5 лет назад
sir can i use a electric drill i dont have a buffer
@rigomartinez8252
@rigomartinez8252 5 лет назад
You're a life saver bro. My 06 Accord definitely needs this.
@Superado2006
@Superado2006 7 лет назад
I buy and sell cars... your detailing tricks and easy to follow videos will help me save a ton of time and money on detailing. which will help me make more money. God bless you for sharing your wisdom and experience with all of us!
@SweetProjectCars
@SweetProjectCars 7 лет назад
thank you Superado......we are here to help
@dutch971
@dutch971 7 лет назад
I need a car. Maybe you're in my area. What's your website?
@Superado2006
@Superado2006 7 лет назад
dutch971 I'm in San Bernardino County. Sorry I don't have website I don't sell that many cars it's just something I do on the side from time to time. if you're in the area let me know.
@jquest43
@jquest43 6 лет назад
+Sweet Project Cars can i use hand power?
@reddy05353
@reddy05353 6 лет назад
BAM it works and did with 3 coats on each headlight Restoration. Thank you!!!!! I have tried just about everything I could but nothing has worked until I saw your video then give it a try. Sure enough it WORKS!!!! Save me money which I'm just about to ordering me the new headlights.
@SweetProjectCars
@SweetProjectCars 6 лет назад
C. glad to hear it worked great for you and thank you very much...and for the great comment, we are glad you are here with us :)
@cxlmobileheadlightrestorat7906
C. Diane Johnson did you try wet sanding?
@jaymorgan368
@jaymorgan368 5 лет назад
First did this trick back in the early 90's but it was to the windscreen on a kawasaki 750 turbo! Came out looking new and i still use this trick on my odyssey today!
@wrapcityhqvicmelbourneaust6570
You made it look so simple and effective there is toothpaste there is compound of polish in different Sam papers and you're absolutely correct everyone's got aluminium polish in Australia we call it Alto soul inner tube who would have guessed that's all you need thanks mate thumbs up great video
@johnsonstringperform
@johnsonstringperform 6 лет назад
Thank you, thank you! My car is running well but looking older. These tips really help me baby it even though I have no garage to keep it in. I almost died two years ago because I was on a highway going through 5 mountain passes in the dark. My headlights were so cloudy they barely put out light. I have't dared drive at night since but I might try it tonight just to see :)
@SweetProjectCars
@SweetProjectCars 6 лет назад
glad to have you with us and that you made it through that ordeal that would be scary thanks for the great comments we do appreciate it..
@tonybrown4298
@tonybrown4298 6 лет назад
Kelley Johnson A
@lookinforgood
@lookinforgood 6 месяцев назад
Had to replace drivers headlight assembly in my mom's '13 GMC Acadia Denali due to a jacked-up socket. (Yes probably my fault). Therefore the passenger side looked worse than its age. I followed the steps here on 12/28/23 and what an amazing result! Simply incredible. Even the smallest pitting was removed. Going back over it tomorrow. The LEDs are back to white as opposed to an amber color due to the yellowing. Need to locate the 303. Thank you for your video and saving me an additional $1400!!!
@alexvhernandez4811
@alexvhernandez4811 6 лет назад
Ok I just bought the exact one you used and I will be doing this to my car tomorrow thanks for responding and for all you’re great videos all very helpful and straightforward 👍
@SweetProjectCars
@SweetProjectCars 6 лет назад
mak you will really love the results, its fast and gets the job done :)
@dawnvanderpool2828
@dawnvanderpool2828 6 лет назад
Just bought a 97 Acura 2 days ago, headlights in sorry shape. Foggy and someone sprayed black something to dim the sides of the light array. Found you at sunset, found my Mother's and a rag and gave it a go for about 10 mins on each. All elbow grease, and the current results are great. It's even thinning the black over-spray. I have more elbow grease for when I have daylight again. Thank You, you Rock!
@SweetProjectCars
@SweetProjectCars 6 лет назад
Dawn thank you very much glad to hear that and elbow grease will work well if you’ve got enough of it good job
@bruceadair3909
@bruceadair3909 4 года назад
MAN YOU WERE RIGHT!!! I WAS BLOWN AWAY, I'V TRY EVERYTHING TO RETORE MY HEAD LIGHTS AND THIS WORKED F?????? GREAT!!!!!!! THANKS
@SweetProjectCars
@SweetProjectCars 4 года назад
Good deal Bruce glad we could help you thanks Mike
@violetxoxox
@violetxoxox 6 лет назад
Wow, now THIS is a useful video: short, I didn't have to listen to 30 minutes of constant yapping, shows me exactly what to do, and now I can go watch a movie and relax for a while. Wish I'd found this video before the three others I watched that went on and on, used multiple grits of sandpaper, and required masking and waiting 24 hours and all sorts of other crap. Subscribing!
@SweetProjectCars
@SweetProjectCars 6 лет назад
Glad to have yo with us Violet :) we are known for getting right to the project without a bunch of yaking, thanks for the great comment!
@juliuscaesar8801
@juliuscaesar8801 3 года назад
Amazing the doofuses that don’t know how to get to point!
@aqhasassy
@aqhasassy 4 года назад
I’m near 70 & just did mine 2 days ago before I saw your vid. I did use the Sylvania kit, no tools, great results. It included everything needed, polish & finishing w clear coat. I love 303 products. After doing mine I better understand the problem. Now that the coat has cured, I’ll protect them w 303. Your info is great. Thank you.
@DarleysinCO
@DarleysinCO 4 года назад
So thankful I found your channel! I have an 08 Honda, my headlights were the worst, I’ve spent $100’s over the past years TRYING to restore them with no luck. After watching you, I invested in a few products and HOLY COW , my headlights are crystal clear in no time at all! 🙏🏾 My only problem was, I was so excited, I didn’t take pictures before! 🤦🏽‍♀️ Thank you for sharing your secrets!
@SweetProjectCars
@SweetProjectCars 4 года назад
Good deal glad we could help
@ZAPOPAN2
@ZAPOPAN2 7 лет назад
Thanks so much!! I did my infinity m35 2006 headlights! One was brand new , so the other one looked like crap!! 😱 I tried different things , & none was as fast or good as this one!! I really appreciate it!! Keep up the good work, I became a new subscriber!
@SweetProjectCars
@SweetProjectCars 7 лет назад
awesome Manuel glad to have you
@fancyalexander
@fancyalexander 6 лет назад
Wow it really works, I did it in my Honda Odyssey and looks like new, thanks man You save me at least $200 👊🏼
@SweetProjectCars
@SweetProjectCars 6 лет назад
thats great to hear serg thanks for the great comments and thanks for being here with us :)
@neverrquitt760
@neverrquitt760 6 лет назад
I did this and was amazed at the quick results. Thanks SPC's oh and I picked up som 303 UV protectant and they look awesome.
@SweetProjectCars
@SweetProjectCars 6 лет назад
with the use of 303 once in a while it last for years
@DavidLamarDavis
@DavidLamarDavis 6 лет назад
Just fixed my daughters 2006 Honda Accord headlights. They look great. Thanks!
@kwbalance108
@kwbalance108 4 года назад
How long did it stay clear for you?
@MC-eh2ot
@MC-eh2ot 5 лет назад
You sir are my go to for all things automotive!
@bruceworman986
@bruceworman986 5 лет назад
Mike buddy I did this to my headlights on my truck and I can't believe how fantastic they look thanks a million keep them coming Mike
@SweetProjectCars
@SweetProjectCars 5 лет назад
Good deal Bruce glad to hear that my friend that’s why were here to help great people like you
@Zspeed
@Zspeed 5 лет назад
Thank's sweet car projects, I use this on my headlights and it worked like a charm! You guys are the best, keep up the great work!
@SweetProjectCars
@SweetProjectCars 5 лет назад
thank you very much my friend
@jimbola77
@jimbola77 6 лет назад
mothers and 303 is a wonder!!!! I'm glad I found you partner your a God send to the tube!!!!!!
@SweetProjectCars
@SweetProjectCars 6 лет назад
we are very happy when the methods we show work great for everyone
@diablabokchoi
@diablabokchoi 3 года назад
jimbola77 what is 303?.
@metudalu1
@metudalu1 6 лет назад
Thank you so much. Worked awesome. I didn't have a buffer, so I just rubbed it with a cloth for about 10 minutes. What a difference. Amazing. A million thank you.
@SweetProjectCars
@SweetProjectCars 6 лет назад
metudalu you are very welcome my friend glad we could help
@AR-sd
@AR-sd 5 лет назад
Thanks! It's one of those things that i haven't tried, but know it's going to work. Cheers!
@tylerw1774
@tylerw1774 5 лет назад
GOD BLESS YOU. I’m going do my headlights, my moms, my dads, and my mawmaws!! Why the hell not!
@bwholladay
@bwholladay 7 лет назад
Just restored headlights of a 1999 Jeep in minutes doing this! Seriously takes 1/10 of the time I used to spend with sand paper. You are a great man for sharing this!
@SweetProjectCars
@SweetProjectCars 7 лет назад
thank you very much :) glad to have you with us :)
@vikingraiders4138
@vikingraiders4138 7 лет назад
Sweet Project Cars No bullshit or hours of work Great job done.
@SweetProjectCars
@SweetProjectCars 7 лет назад
Thanks a bunch Clarence we do appreciate it.
@ergman85
@ergman85 7 лет назад
I dont find that thing in Europe could you suggest another brand that i can find in Poland?
@SweetProjectCars
@SweetProjectCars 7 лет назад
Ermanno Russo look for any metal polish and try that
@fat-hand
@fat-hand 4 года назад
THIS WORKS AMAZINGLY!! This man rocks supreme on showing a simple fast lasting solution!
@SweetProjectCars
@SweetProjectCars 4 года назад
Glad this worked out for you have a fantastic day mad Mike sweet project cars
@TheMikhunterrauha
@TheMikhunterrauha 6 лет назад
I used a pre packed kit when I 1st bought my AMG 6years ago, & the sanding back all the old clear coating properly sweating my R's off for about 3 hours, then the application of the clear coating didn't take long & I was wrapped with them looking brand new. Once a year I hit them with a buff & wax that kept them decent, but this last year I just wasn't happy with them anymore'. So was ready to do this major crappy job all over again, or spend 70 bux with a 2 step Maguires kit. Then I saw your video & this morning I went outside, grabbed my 3/4 tin of Mothers, & my buff, & in less than 10 minutes they have turned my lights better than they ever had, (brand new). Thanks so much for passing this knowledge on, & whoever passed it on to you! I Mothers sealed ,& glazed them, then Mother's Carnauba Waxed them, and am stoked with how perfect they are. Thanks again man, I owe you a beer.
@SweetProjectCars
@SweetProjectCars 6 лет назад
Peace Peas thank you very much, we are glad to help,.and we actually came up with this method after the struggles you mentioned...the torture of doing them with sandpaper and all the steps and hours... we decided to find a better way and hence the video you just viewed :)
@MrJoebiz24
@MrJoebiz24 5 лет назад
Brilliant tip with minimal investment and time. Thanks!
@lesyoung7644
@lesyoung7644 5 лет назад
worked great on my 08 Jazz. Took more than 3 min though because the wife came to "help" hahaha Thank you sir
@cajun381sonnier4
@cajun381sonnier4 5 лет назад
I tried this and worked like a charm thank you for sharing
@TheMikhunterrauha
@TheMikhunterrauha 6 лет назад
Ive just walked by my 2007 AMG Mercedes in which i used your method of rotational automotive buff & Mothers wheel polish & abit of water that I did about 6 months ago. MAN! This method rocks! I haven't applied anything else to it except a bath now & again, & it stills looks brand new. Good onya man 👍 & thanks very much for the tip..
@SweetProjectCars
@SweetProjectCars 6 лет назад
Bikes N Stuff thank you and you are very welcome my friend :)
@michaelyonn1509
@michaelyonn1509 6 лет назад
I treated my moms headlights this weekend. Was suprised how well it worked. Thanks!!!!
@SweetProjectCars
@SweetProjectCars 6 лет назад
you are very welcome :)
@CHEDDERxBOB
@CHEDDERxBOB 3 года назад
How well did they hold up?
@sjgmlg
@sjgmlg 7 лет назад
Been doing this for years now on people's cars and it blows there mind how easy it is! Great video!
@SweetProjectCars
@SweetProjectCars 7 лет назад
thank you david
@AK4ourty7even47
@AK4ourty7even47 7 лет назад
Sweet Project Cars will this work if ive already tried the sanding down method?
@SweetProjectCars
@SweetProjectCars 7 лет назад
YES BUT ! You Will Have To Sand It With 1500 Or 2000 Grit IF It Is Really Scratched Up...If Not Then Hit The Living Tar Out Of It will metal polish
@jamesflores9456
@jamesflores9456 7 лет назад
if you do that can you get acetone or alcohol to remove oils from the wax to clear coat for a forever shine
@leandrorodriguez3896
@leandrorodriguez3896 6 лет назад
How does the grill goes in the yellow 5717
@joshburch9120
@joshburch9120 3 года назад
Dude I’m so impressed I feel like I know you just by watching your video I feel a concrete connection ,thanks bro!
@SweetProjectCars
@SweetProjectCars 3 года назад
DUDE!! if any of that concrete goes over those forms YOU'RE GONE!!!! LOL... good to hear from you, how's that MI weather treating you? Sunny and 70 here yesterday :) Take care buddy. mad Mike the hammer SPC
@mikemagnum7987
@mikemagnum7987 5 лет назад
Excellent information my friend! Thank you, thank you, THANK YOU!
@gammaraygus
@gammaraygus 7 лет назад
did this today on "brunhilda" and it worked great. probably could have achieved even better results with a quality polisher like you have in the video, but i only had a drill. either way...consider this a testimony that this process works. can't wait for it to get dark tonight so i can see the difference. thanks so much for sharing!
@SweetProjectCars
@SweetProjectCars 7 лет назад
you are very welcome we have another video coming out on more great tips for headlights
@tonichecavalari5956
@tonichecavalari5956 3 года назад
I'm digging my mother's aluminum polish out of the garage as soon as possible. I don't feel like taping, sanding, rubbing & smoothing and jerking the lamps off for three hours ' . Great news can't wait to try it ! 😉👍😎🇺🇸
@SweetProjectCars
@SweetProjectCars 3 года назад
Nice, you will love the results Toniche! Thanks for watching and sharing, we appreciate it. Have a great day. mad Mike the hammer SPC
@vics-videos
@vics-videos 6 лет назад
Wowwwwwww!!! I am SO happy! Having spent a lot of money in the past for various products, this + 303 protectant is the best and quickest and cheapest I've seen to date. Can't wait to try it!
@SweetProjectCars
@SweetProjectCars 6 лет назад
Victor you will love the results of this my friend thank you very much for being here with us.
@haxorinator8219
@haxorinator8219 6 лет назад
Worked perfectly on my 2002 Acura RSX Type S! Thanks!
@SweetProjectCars
@SweetProjectCars 6 лет назад
That is awesome to hear my friend glad it work for you thank you for sharing it
@kenkramer4055
@kenkramer4055 3 года назад
I have watched about every video on restoring headlights. After watching your video I decided to give your method a try. My light were so bad they wouldn't pass inspection.I bought a $5 can of the Mothers Mag & Aluminum and an applicator for $1.50. I decided to try it by applying the polish using a little elbow grease instead of a drill. After a total of 30 minutes for both headlights, they look almost new. Fantastic idea, Thanks
@SweetProjectCars
@SweetProjectCars 3 года назад
Awesome, Ken!! Glad to help. Thank you for sharing and being here with us my friend. Happy New Year. mad Mike the hammer SPC
@chesshead3943
@chesshead3943 5 лет назад
Thanks! This worked great on a 2001 Honda Accord. I used a cordless drill for the buffing, at 400 rpm.
@SweetProjectCars
@SweetProjectCars 5 лет назад
good deal this works on many that are not to bad
@whachucallme1
@whachucallme1 5 лет назад
Just watched this video with about 15min before i had to leave for work and realized i had all this stuff in my garage so I gave it a go real quick and 😲 it worked! My 09 acura mdx headlights look new! Thanks man!!
@SweetProjectCars
@SweetProjectCars 5 лет назад
TormentedSceptic good deal my friend glad we could help you :)
@guy3749
@guy3749 6 лет назад
I buffed out my headlights like you said, wow what a difference they look awesome now! Thanks for the great tip.
@SweetProjectCars
@SweetProjectCars 6 лет назад
Thank you Guy we truly appreciate that and glad that it worked for you my friend please share our channel everywhere you can have a great weekend
@indianjoe5382
@indianjoe5382 5 лет назад
I have a 95 chevy k 1500 with extremely cloudy headlights. I was getting ready to order replacements when I came across this video. I had my doubts about this fix but figured I would give it a shot since I already have the mothers polish and small buffing pads. To my surprise it did an amazing job compared to what they originally looked like. They are not perfect but vastly better then before I did this. Thanks for the tip.
@emanuelransom1604
@emanuelransom1604 6 лет назад
This stuff is GREAT I told my hole neighborhood about it we are a small town in Georgia called Clarkston.
@SweetProjectCars
@SweetProjectCars 6 лет назад
Emanuel Ransom thank you very much my friend :)
@JoseHerrera-pe4xz
@JoseHerrera-pe4xz 3 года назад
I Am Always Write you’re sad.
@Mrch33ky
@Mrch33ky 5 лет назад
I just did this on the cloudy looking headlights of my 2006 Sonata. I used the Mothers polish and a buffer pad on a cordless impact wrench with a drill adapter. Took about 3 mins per headlight. Finished it up with the 303. Looks Amazing!
@SweetProjectCars
@SweetProjectCars 5 лет назад
Good deal glad to hear that my friend glad we could help
@lrickyutah
@lrickyutah 5 лет назад
This video's like two years old, but I just tried it on my son's 2000 Ford Taurus. 10 minutes and the headlight looks new. Thank you!!
@SweetProjectCars
@SweetProjectCars 5 лет назад
Thank you Rick we appreciate that glad it worked for you
@christopherlerwill1709
@christopherlerwill1709 6 лет назад
Hi a BIG THANK YOU FROM THE UK thank you my 2006 suzuki ignis failed the mot cloudy headlights ,2 new lights £345,ER NO !!!looked on you tube found you guys THANK YOU THANK YOU THANK YOU XXX 10 mins job done NIGHT AND DAY total cost buying the pads and mothers paste £14.99 THANK YOU JOB DONE .
@SweetProjectCars
@SweetProjectCars 6 лет назад
Christopher Lerwill glad we could help you my friend and glad you are here with for all our easy DIYer tips :)
@user-ls5zp4bj7s
@user-ls5zp4bj7s 3 года назад
Finally a tip that tells it the way it is. This is what you need, what you have to do and how to do it. For once a good RU-vid video which does exactly what it says on the tin. Good job.
@SweetProjectCars
@SweetProjectCars 3 года назад
Glad to help! Thank you so much for your comment and for being here with us! Have a fantastic day my friend. mad Mike the hammer SPC
@tomb375
@tomb375 4 года назад
Mind Blown! I just ordered the Mothers, I hope it works this well for me. SWEEEEEEET! Love all you videos!
@SweetProjectCars
@SweetProjectCars 4 года назад
You will love the results my friend
@australia.thegreatsouthern3837
@australia.thegreatsouthern3837 3 года назад
Short, sweet and to the point. Thanks for the video. I'm doing my headlights first thing in the morning
@SweetProjectCars
@SweetProjectCars 3 года назад
No problem 👍 Our pleasure to help, thanks for the view. Have a great day my friend. Cheers! mad Mike the hammer SPC
@lindaknezek-shelton5922
@lindaknezek-shelton5922 6 лет назад
We watched your video and thankfully we had the Mothers mag polish, unfortunately we couldn't find our buffing pad (5 sons). Husband used good old elbow grease, turned out beautiful!!! Thanks so much for sharing!!!
@SweetProjectCars
@SweetProjectCars 6 лет назад
Linda Shelton thats great to hear we could help and thanks for the great comment :))
@charliejones7585
@charliejones7585 5 лет назад
What kind of cloth did you use without the buffer?
@michaelpaterson8086
@michaelpaterson8086 4 года назад
@@charliejones7585 yes Great question, how to do it by hand please peeps? What cloth works best?
@ericktapia5698
@ericktapia5698 4 года назад
Michael Paterson low GSM microfiber lol they have a more grittier texture
@JustAlanIsCool
@JustAlanIsCool 4 года назад
I think I used too much grease 😳
@mightandpower2012
@mightandpower2012 5 лет назад
That's the coolest thing I've ever seen
@txwarrior50
@txwarrior50 6 лет назад
Just did my headlights and they came out perfect. Thank you guys.
@SweetProjectCars
@SweetProjectCars 6 лет назад
Ancient warrior thank you very much we are so glad we could help we do two videos a week for the DIYer one on Tuesday one now on Friday have a great day my friend
@VyperZConcepts
@VyperZConcepts 6 лет назад
I just used this technique and I had awesome results. Thanks for this video. 5 to 10 minutes and the headlights look new.
@SweetProjectCars
@SweetProjectCars 6 лет назад
Vyper Z thats great to hear my friend now to keep them looking awesome for years see this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hD2CKp9mco0.html hope this helps you my friend :)
@decadude8968
@decadude8968 4 года назад
I used mothers mag and aluminum polish on my friends very yellow headlights. Didn't even use a drill or dremel or any rotary device. Just a foam pad and paper towel to buff the excess off. Worked great on it and makes a huge difference just with some elbow grease.
@SweetProjectCars
@SweetProjectCars 4 года назад
Good to hear that smart thinking and with a little effort you have shown people that anything can be done have a great day mad Mike sweet project cars
@krisconkey8165
@krisconkey8165 6 лет назад
I’ve detailed for 30 years. This actually works
@SweetProjectCars
@SweetProjectCars 6 лет назад
Thank you Kris we truly appreciate that thank you for being a fantastic subscriber have an awesome weekend
@braeburnhilliard8340
@braeburnhilliard8340 5 лет назад
That's an awesome video and I'm sure multitude of people will appreciate you sharing the facts with everyone! Thanks for sharing!
@SweetProjectCars
@SweetProjectCars 5 лет назад
Braeburn Hilliard you are welcome and if you want to see an even better headlight video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hD2CKp9mco0.html thank you for sharing my friend :)
@mulletmotors22
@mulletmotors22 6 лет назад
The theme of this channel: 303, mother’s and rain x! Keep up these videos! I’m a 16 year old kid who runs a small detailing business and these are super cool tricks that i never was taught by my pro friend!
@SweetProjectCars
@SweetProjectCars 6 лет назад
car geek take a look at our many videos that are about everything to do with a vehicle..glad we can help..see the ceramic coating and paint chip videos along with cleaning and dying leather so many of them
@Triggerman2505
@Triggerman2505 3 года назад
Awesome Video. I have had this same exact can of Mothers product sitting on my garage shelf for 15 years because quite frankly, it is not a great product for aluminum wheels, but man, does it ever work on headlights. Who knew. Thank you!
@SweetProjectCars
@SweetProjectCars 3 года назад
Thank you for sharing and watching Al! It really does work doesn't it! Happy New Year. mad Mike the hammer SPC
@alanwallace3253
@alanwallace3253 5 лет назад
Amazing result, just ran into this and I have subscribed. I’d still tape it off on a customer car but respect your call not too. I’d also use a 3 in pad for better control with less risk of hitting something I don’t want to polish with that compound. My little 2 cents. Here on Maui we run into buckets of bad lights.
@SweetProjectCars
@SweetProjectCars 5 лет назад
glad to have you with us my friend
@tomtruesdale6901
@tomtruesdale6901 5 лет назад
Just used this system to buff out the head lights on my 2012 Honda CR-V and I must say it worked like a charm. Coated the lenses with the 303 and they almost look brand new. Saved me over 200 bucks on replacement headlight assemblies.
@SweetProjectCars
@SweetProjectCars 5 лет назад
Good deal Thom so glad we could help you save that kind of money have a great day my friend
@mikec2810
@mikec2810 6 лет назад
Thanks so much for sharing this,I just did it and my headlights look brand new again!
@SweetProjectCars
@SweetProjectCars 6 лет назад
Mike that is great to hear ...glad we could help :)
@michaelgossett1415
@michaelgossett1415 6 лет назад
What's Happening Captain? I purchased the "Mother's product" Proceeded to apply it to my headlights. Using good old fashion "elbow grease" Because I don't have a buffer. The RESULT WAS ABSOLUTELY FANTASTIC!!!!
@SweetProjectCars
@SweetProjectCars 6 лет назад
That’s awesome to hear Michael little elbow grease never heard anybody lol that shows it can be done, look at it this way, it’s good exercise good job my friend
@michaelgossett1415
@michaelgossett1415 6 лет назад
Sweet Project Cars As my Aunt Josephine said "It aches my hand but it eases my heart!!!" Elbow grease is Good!!!
@greenbackz
@greenbackz 5 лет назад
hha i was about to ask if this could be done by hand with a sponge since i don't have a polisher..
@frankthetank1369
@frankthetank1369 5 лет назад
Sweet Project Cars sorry I had to it it's hurt not heard. Lol. I kill words also, but I caught that one.
@michaelgossett1415
@michaelgossett1415 Год назад
Captain, my headlights was horrific!!! I had to sand, the oxidation was super heavy. Once I finished sanding , Mother's polish came through like a Champion!!!
@saltlifegull4091
@saltlifegull4091 3 года назад
WOW, heck yeah, "us gals" you got my vote. We girls need real simple instructions, so thanks. Also appreciate you spending the time to write up and furnish all the links. Excellent video:) Subscriber from Florida.
@SweetProjectCars
@SweetProjectCars 3 года назад
Awesome! Thank you! Have a great day! mad Mike the hammer SPC
@saltlifegull4091
@saltlifegull4091 3 года назад
@@SweetProjectCars SORRY help again! I don't have the electric thing. Will hand sanding work? I already bought the 3m kit at O'Reillys, joke. Not doing anything, no polish or anything in there.
@SweetProjectCars
@SweetProjectCars 3 года назад
You can, but you better have a 5 gallon bucket of elbow grease and a few extra hours to complete the process. Thanks for asking. Have a great day. mad Mike the hammer SPC
@luvr01
@luvr01 5 лет назад
Thanks for this video! I was able to restore the headlights on my car to nearly new!
@Broomehall
@Broomehall 4 года назад
I'm a professional dealer in UK, he's completely correct, you don't need umpteen products and spend half hour or more cleaning your headlight lenses, 3M cutting compound, or T Cut here in UK ( if only lightly faded ) and that GM pad on the end of a drill .... and hey presto! .....good enough to pass MOT and look a million times better, why waste money and time? great video and advice.
@SweetProjectCars
@SweetProjectCars 4 года назад
Broomehall thanks for sharing my friend mike
Далее
How to restore Headlights | DIY Headlight Restoration
10:52
МНЕ ИСПОРТИЛИ МАШИНУ #shorts
00:30
Косплей на ГОЛОВОЛОМКА 2!
15:20
Просмотров 479 тыс.
Headlight Restoration The Only PERMANENT Method!
9:01
ПОЛИРОВКА ФАР своими руками
14:10
HOW TO CLEAN YOUR ENGINE--NO WATER NO SCRUBBING
8:03
Просмотров 126 тыс.
three feet under the keel   #offroad
1:00
Просмотров 15 млн