How PRO’s actually sharpen knives! Fix your mistakes fast!!

Подписаться 314 тыс.

Просмотров 38 тыс.

50% 1

Get your Knives razor sharp! In this video we share our tips and tricks of sharpening a knife to razor sharpness on japanese water stones! Never a dull knife again!
Support DBK By buying from Tools for gents!
bit.ly/Tools4G...
The Knife we Sharpened (MKM Malga)
USA: shrsl.com/49gur (m390 edition)
EU: bit.ly/malgaDBK (m390 edition)
Stones we used (but with base)
Naniwa Chosera (professional) 400 : amzn.to/3LYeo9W (affiliate)
Naniwa Chosera (professional) 1000: amzn.to/46POdKD (affiliate)
Naniwa Chosera (professional) 3000: amzn.to/3rGmNbb (affiliate)
Check out our own Webshop for strops and diamond sprays!!
bit.ly/DBKshop
Check out the DBK Worksharp Bundle
www.worksharpt...
Join Our monthly giveaway Give-Away! Join the royal knife club to participate. THANKS!
bit.ly/DBK-Mont...
________________________ Shops!________________________
Support us by buying from our shop!
bit.ly/DBKshop
Awesome shop in Europe (affiliate)
bit.ly/Tools4G...
BladeHQ Knife shop USA: (affiliate)
shrsl.com/20i50
________________________ Check us out!________________________
*Check out our Patreon Give-Away and support the channel: *
bit.ly/DBKPatreon
hidden message: Mikkie is an ugly unwanted child
*Discord!*: / discord
Insta: bit.ly/DBKInsta...
FB: bit.ly/DBKFacebook
____________________________Music:_________________________
#sharpening #knife #Knives

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 168

@sharpfactory3705 11 месяцев назад

I like your sharpening videos but as a professional sharpener i have to say a few things. Softer stones are not bad and if you cut into the stone while sharpening you put way to much pressure, softer stones have way more feedback than harder stones, 2. Learn to switch hands so that the edge of the knife is facing you at both sides while sharpening so your bevel consistency will be way better, 3. No pressure at all the apex is very weak against lateral force so you will bend the apex on the stones and your end result will be much duller, 4. Deburr on the stones on every stone, if your knife didnt shave hair after your 400 grit stone you didnt get the full potential of of your blade, if you dont deburr on every stone you will end up with a stubborn burr at the end that holds on to the blade and if you strop it agressiv you tore it of your apex and it takes good metal with it, if you weaken and remove the burr at every stone with as little pressure as possible the burr wil remove easyer and your knife will have a much cleaner sharper edge with more bite, 5. Dont over strop, you round your apex, a decent steel that is sharpen properly is easy to deburr just 2-3 controlled strokes on smoth leather or basswood with diamond spray on it is enough. best wishes from germany

@hobe9078 11 месяцев назад

Excellent information. Thank you

@johnchristopher3032 11 месяцев назад

I concur. Stropping on every stone is really important.

@nextii7 10 месяцев назад

Was kostet denn das Schärfen bei dir/euch pro Messer? Frage für einen Freund! ;)

@sharpfactory3705 10 месяцев назад

@@nextii7 moin, das kommt drauf an küchenmesser ohne Ausbrüche oder Reparaturarbeiten bis 13cm Klingenlänge 8€ bis 25cm 10€ und Taschenmesser oder Jagdmesser schleife ich auf dem Tsprof da kostet es bis 12cm Klingenlänge 15€ für einen normalen schliff und eine spigelpolitur je nach Aufwand Liebe Grüße

@haraldmoeller-cp6nj 9 месяцев назад

Thanks this info never gets dull to listen to .🤓

@craig87037 11 месяцев назад

Pro Tip: The slurry build up on the stone will also benefit when sharpening and don't strop too hard or you can slightly round the edge. Great video lads! Keep it up.

@SteAbs 11 месяцев назад

A good ol traditional DBK video....I like it!

@gregwilson3395 11 месяцев назад

One of the best sharpening videos I've seen. It answered a lot of questions for me. Especially the leather stroping part. Thanks Martin!

@twistedhairball 11 месяцев назад

I really really miss this style of video. I love all of your work but this old school type are my favourite ones. Thanks boys!

@1mataleo1 6 месяцев назад

I learned to sharpen from watching Virtuovoice and thanks to his videos and a lot of practice , I now get my knives scary sharp. I’d like to add another pro tip onto what Maarten said: Aside from paying attention to the sound, also pay attention to the feel. Once you get a little experience and practice, the sound and feel will tell you everything you need to know. This applies to stropping as well

@NandoKleijn 11 месяцев назад

Old school almost. Like it. Stones forever, gentlemen.

@Bobby_Digital_23 11 месяцев назад

30 Years of RU-vid and DBK is the only channel im obsessed to see the nu episode every fucking thursday. Happy Congratiolations Birthday Christmas Feierabend To You.

@DutchBushcraftKnives 11 месяцев назад

hahah we are honoured! thank you so much!

@Dr.Shankenstein 11 месяцев назад

RU-vid established 1993 😎

@Bobby_Digital_23 11 месяцев назад

@@Dr.Shankenstein jap, thirty years. Said it.

@Bobby_Digital_23 11 месяцев назад

@@DutchBushcraftKnives every time since the first episode. I feel honored.

@1diggers1 11 месяцев назад

30 years?… I remember the internet in the 90s, it would of taken an entire day to download this video. Buffering, buffering….

@Cid_1 11 месяцев назад

I really enjoy sharpening on Japanese whetstones. Though I mostly use Diamond and resin bonded diamond plates on more complex steel, I use Japanese stones for most kitchen knives and bushcraft knives with more primitive steel.

@Spainkiller 5 месяцев назад

Hi, newbie here: why not just use one type of stone for all knives?

@Cid_1 5 месяцев назад

@@Spainkiller The most ideal would be to use 1 type like diamond or resin bonded diamond, less mess. But I also enjoy using Japanese stones for the feedback and feel on my kitchen knives.

@bldy_FrmdaiX 11 месяцев назад

3:38 😂😭 martin and Micky you’re the best

@noyzmunky 11 месяцев назад

Cheers lads, you reignited my love for the song of steel last year.

@pooslinger6839 11 месяцев назад

Even though i regularly sharpen with a stone, I can still Learn from videos like this. It’s good to gather all the info and techniques because there is always room for improvement! Thanks guys!

@1diggers1 11 месяцев назад

Happy Thursday! I have been waiting... OK now I've got my DBK fix! Phew! More good sharpening tips guys. I've struggled for a long time to get consistent results with stones, I think my problem is I just don't sharpen frequently enough to get the muscle memory. BUT I recently bought the work sharp ken onion with knife grinder and that is really pretty easy to use. I used it to reprofiled my benchmade mini barrage to a 15-ish degree convex and the result was just the weight of the knife would slice through printer paper. Pretty sharp stuff. I'm not giving up on water stones though, they are still a more elegant and civilized way to sharpen. Thanks dudes. Oh yeah, I got a Fallkniven Scout in the mail yesterday and I already love it, it's just so cute!

@csg2537 11 месяцев назад

Really good video!!!!!!!....😎 No crazy things just reaĺ skills and professional things! GOOD!!!!!

@ezk9026 11 месяцев назад

Great videos guys, thanks for not cutting off Martin hahah still love ya Mickey. Now when are we gonna destroy the LT wright bushcraft knives. They are excellent blades I own 4 of them. Made in USA all handmade by great people but I wanna see what the 3v can handle of the DBK DESTRUCTION TEST! Stay safe all.

@ragemoure5542 11 месяцев назад

Yay new video love y’all!!!!

@shannondixon9031 11 месяцев назад

I started on stones, my grandads Arkansas oil stone and the best synthetic carborundum I could find.... Worked through heaps of the other systems...I have a box full of different systems..... But I find myself often going back to those old oil stones..... Good vid guys

@ledfarmer4571 8 месяцев назад

Well done

@JoeyB7615 8 месяцев назад

I convex almost all of my knives because of you guys

@smokyriverbushcraft 11 месяцев назад

Hell Yeah! DBK here to teach us how to sharpen like bushcraft legends 🗡️🗡️🗡️🗡️🗡️🗡️ 🌴🌴🌴🌴🎄

@Bobby_Digital_23 11 месяцев назад

Oh yeah my man 🎉

@emesser7087 11 месяцев назад

No pro tip but a tip. 80 percent of factory edges are not the best angle. So I'm my opinion very often it's not the best decision to follow the stock grind angle

@SekeNoLike 7 месяцев назад

Yeah but I struggle to find the right angle, rn my benchmade 940 is at like a 17 degree angle which I think is too shallow and tbh I’m so scared to add a convex edge to any of my knives. I’ve only ever been around v edges my whole life. And I don’t use stones I used on the the work sharps. Also, most my knives are well past the 100-200 dollar range and to me that’s a lot and i don’t wanna fuck up any of the knives

@Furko08 7 месяцев назад

@@SekeNoLikeyou could get a cheaper knife or three and just start practicing with those

@1mataleo1 6 месяцев назад

Very true. I almost always have to alter a new knife to suit my preferences

@fossilimprint2954 7 месяцев назад

Thank you gentlemen, very helpful !

@spencerbartley943 11 месяцев назад

Very nice stone great video

@dainiussileika2622 9 месяцев назад

Could you do a video on sharpening just the tip? Somehow, while I can get shaving sharp on the main part of the blade, the rounded tip is always much duller. Thanks!

@karl3261 11 месяцев назад

Thank you for this video. It helped a lot. Great video.

@heyarno 11 месяцев назад

I get good results with stropping carbon steel. It's all I do for month of use. It always comes back to pleasant shaving sharpness. Unless I damage the edge, then I need to relearn the stone. My strop uses hard buffalo leather though, and I barely press on it. Just experiment a bit after you get down the basics, and you will find something that fits your needs and skill.

@lars43771 11 месяцев назад

Great video! I sure do love my naniwa chosera/pro’s as well and use them when i can get away with it.

@danielcrutchley4858 5 месяцев назад

I would like to see an episode where you have every knife you both own, displayed in the background. I'm thinking there would be quite a few knives 😲

@matusknives 11 месяцев назад

I do some details differently than you guys, but this is a great way to sharpen knives and it was very well explained. Job well done.

@CaptainAiryca 11 месяцев назад

These pro-tips are gold. Thank you!! Someday I'll get my hands on stones like that. Y'all'd die if you felt how dull I let my knives get lol!

@leemichel8199 11 месяцев назад

I agree with you on stones being king for sharpening, but you also get what you pay for there's a lot of new comers that start on cheap stones ,like i did when i started ,,I now wish I had started on better quality stones ,now I have perfected my methods ,but had to learn the hard way ,if someone is serious about knives and buy high quality knives then I think that they should not cheap out on the stones ,what do you guys think ?.God bless you and your families..thanks for the hard work you put into the channel 🙏. Lee

@pAdDy111hDH 11 месяцев назад

Great video, guys!

@hanktheknife4352 11 месяцев назад

Heeeey it‘s thursday and DBK-Time! Today i‘m stoned, so what could i say… Like the format and, though i think i can sharpen my knives somehow (HAKD result 98 with the DBK Knife) it‘s good information presented nice. Thanks, honies!

@stroppystuff641 11 месяцев назад

Good video boys! Enjoyable as always

@marcelvdfvandamme5927 11 месяцев назад

De Beste Kerels 😉 Blijft leuk en informatief👍🏻

@rinnsbebelindegrombe 11 месяцев назад

best format

@bazzc 11 месяцев назад

Belgian blue wetstone is a nice folow up stone to finish.

@LosRiji 11 месяцев назад

To soft for steels beyond 63 HRC

@bazzc 11 месяцев назад

@@LosRiji beyond 63 hrc I use a belt grinding machine 😎

@LosRiji 11 месяцев назад

@@bazzc work sharp Ken Onion? Or a mature one?

@bazzc 11 месяцев назад

@@LosRiji have both. But ko worksharp with blade grinding attachment works good enough.

@widipuji972 11 месяцев назад

Cerax one of my favourites. Cheaper to

@ElggNamba 11 месяцев назад

Great video. i always have problems with longer knives, that don't fit on the stone like the small one you used. I don't get a nice sharpness all along the edge.

@humbertobautista7773 11 месяцев назад

Old school video! 🤠

@just9911 11 месяцев назад

Kinda out of left field with this suggestion but here goes - have you guys ever done stone knapping? I would definitely watch a video of you guys starting with stone core and progressing to a knife (or hand ax).

@Lurifaks707 11 месяцев назад

That tools for gents ad was hilarious

@Wideranger 11 месяцев назад

Even a grumpy old bastard like me learns something from you two. Sometimes. Occasionally. Like just now. So...thanks 👍

@DutchBushcraftKnives 11 месяцев назад

Haha thank you so much

@mdunawaym 11 месяцев назад

I love my stones!

@josefmalke6729 11 месяцев назад

You should try out The solognac sika Grip 100

@WorkerDroid 11 месяцев назад

I have had my old Lansky sharpening kit since 1994, and it is good for me since I have never had luck with stone sharpening by hand. I can do chisels and plane blades just fine but pretty sketchy on knives. This week I made 4 new “stones” for the Lansky. I had a set of those cheap diamond plates ($20 for 400, 600, 1000, 1200). So I glued on some timber backings, drilled a guide hole, and set in a set screw, just like on the original Lansky stones. I’ve sharpened a few knives and honestly, for an amateur, it’s easy and reliable to get near perfect results, especially on large knives. The diamond cuts fast. I finish with the Lansky ultra fine stone, and it works great. I admire your skills Marten, but I don’t think I could do any better than the old Lansky kit. Bravo to you both. Love the channel. I wish you great success and long lives.

@debabrate69 7 месяцев назад

I CANT BELIVE I WASNT SUBSCRIBED FOR 2 YEARS BUT I WANTEDCHED EVERY VIDEO ....

@drkwrk5229 11 месяцев назад

You need to look at Helle Jegermester (Jägermeister) The knife even smells good!

@geraintjones75 11 месяцев назад

Great vid, can you make a vid like this one, on how to sharpen convex blades?

@AdamJohnson-dr2ri 11 месяцев назад

My clamp style sharpener cannot be adjusted precisely but for a newbie it can still slightly convex or do a multi angle, with a better setup like a wicked edge you “should” be able to get really close to a convex with more control and then follow up with a very fine stone/strop to mostly round the edge out. I’ve only played with two angles so far but at some point I will buy a WE, when a knife hits the $250 plus price range I don’t trust myself to freehand sharpen(disclaimer, I’ve never owned higher end stones so that may play a big part in my semi disappointing results with freehand…I can freehand to the lvl of sharpness that most ppl would call sharp but getting to the next lvl so far has required a clamp style).

@jrndzlk 11 месяцев назад

Any chance of you guys reviewing reiff knives f4?? Would like to see your opinion guys, in my opinion very good competition to gunny.

@mariuszm7043 11 месяцев назад

You can get convex also from KME sharpening system with a special bent rod. Maybe an idea to test it?

@xkaos6 11 месяцев назад

convex FTW!

@roguesheep1747 11 месяцев назад

I Fooked up a San Mi SRK 🤣😂 I butter knifed it 😂 that horrible noise is what I was listening to 😬 finally sussed it , There was not a mark on any of my cheap ass Mora fishing knives ,I know I know I should have started with those ...your guys voices echoing through my mind "You should practice on cheap knives" practice on cheap knives" . after listening to shredding noise like when Quint pulls his fingernails across the chalkboard in Jaw 🦈 😆now I prefer oil stones . This video was stellar 👌.

@fathersonsurvival 6 месяцев назад

Can you do this with a diamond stone?

@donz8501 2 месяца назад

He mannen, top video. Ik slijp net als jullie alles wat ik binnen krijg meteen om naar convex. Maar ik doe het noodgedwongen nog steeds op schuurpapier. De ondergrond echter niet de muismat maar een lap leer (van een oude bank) zacht en flexibel. Ik krijg alles echt angstig scherp, maar toch....de skills van steen slijpen wil ik heel graag leren. Kocht een van de betere stenen bij K&T en aan de gang. In laten weken en slijpen maar. Een oude Mora als oefenmateriaal. Maar ik verpauperde die hele steen. Het mes bleef maar happen in de steen met de teruggaande beweging. Nu mijn eerste vraag: is er een manier om de steen week mooi vlak te krijgen en sterk? Het is net alsof hij "verpoederd" is en dus overal kleine hapjes er uit. Mijn tweede vraag: hoe voorkom ik dat happen. Mannen....een top kanaal dit, ik hoop op een antwoord en hoe dan ook..... een dikke 10 voor jullie.

@kee9168 11 месяцев назад

I got a little confused to buy a knife , so I need advice from yours guy . Real steel knives and fallkiven f1 which one should I buy? By the way I like only convex knives. Please

@epleyscott86 7 месяцев назад

I would buy a strop but the shipping to North Carolina cost as much as the strop does

@hungrymanfromhungrylandent9122 11 месяцев назад

Can you finish on a coarse stone without a strop Im wondering this as i have a oil bench stone 120-320grit

@DutchBushcraftKnives 11 месяцев назад

You could do without Stropping on leather. But you'd have strop the stone. It's not the same result but it works for getting rid of most of the burr

@a.b.creator 5 месяцев назад

9:24 I like his Eminem reference 👍🏼 😎 I just lent my sharpening stone to a friend last evening and we were discussing why did my father used to wet the stone? So my friend tried it without wetting it and it sharpened the knife,but we are not experienced knife sharpeners. My sharpening stone has one grit on one side and a different grit on the other side. From a novice, do they have to be wet with water?

@jmunsamy 11 месяцев назад

Mickies close up camera work was a bit too close to Martin and subject matter. Loved Martin back in front of the camera with your og style of video.

@budthecyborg4575 11 месяцев назад

1:57 "Do you want it any duller" Yes. You need to saw through a cable strapped to a metal frame. "Most people" badly chip and dent their work knives.

@DuxLindy 11 месяцев назад

if you're not forming a bur or removing the scratch pattern from the previous stone on higher grit stones within around five minutes you've accidentally changed your angle or made too high of a jump between grits

@janezjanez7493 11 месяцев назад

I would love to take advantage of the Work Sharp DBK bundle, but I live in EU. Any chance of making a good deal for us living on this side of the pond?

@darkcheaker 11 месяцев назад

It might be a dumb question for some, but still - why do you need a convex on your bevel?

@DutchBushcraftKnives 11 месяцев назад

It's not mandatory but we like convex because we feel it feels better on wood and food prepping. Its also a very sturdy type of grind without adding hard shoulders that create friction like a secondary v edge

@darkcheaker 11 месяцев назад

@@DutchBushcraftKnives I see. I'm used to sharpening kitchen knives, and tend to move towards lower angle, since I prefer sharpness over sturdiness, and I suck at sharpening. So now my convexed bevels are justified.

@daveyboy6985 11 месяцев назад

heck I didn't think you could blunten a magnicut blade so easily, thought it would cut straight through the benchtop 😂

@marquiquijones7518 9 месяцев назад

Do you sharpen a scandi grind the same way?

@DutchBushcraftKnives 9 месяцев назад

Basically but my scandis are all very shallow convex as.i.like.jt that way. Just focus more.on keeping the angle. Go slower

@marquiquijones7518 9 месяцев назад

@@DutchBushcraftKnives thank you kindly.

@RiderOftheNorth1968 11 месяцев назад

For the algorithm.

@haraldmoeller-cp6nj 11 месяцев назад

MARTAN,MARTAN,MARTAN,MARTAN...HEY GENTS you could give the TRC Polheim a going over!🤓😎

@casualedc 10 месяцев назад

Hey mickie…. Shhhhh 🤫 😂

@thorael 11 месяцев назад

🧡

@sambassist7602 11 месяцев назад

*Martin starts stroping * Micky : come on say something ! * Martin : yeah… uh… well that’s leather… 😂 don’t worry we like your voice Micky

@Bill-mw7sh 11 месяцев назад

NL5 in COS? WHEN DID THIS HAPPEN???

@hirayaman246 11 месяцев назад

Interesting......i saw this and then i thought back of one of your first videos, when you said you had to sharpen some knives for a restaurant, it was way back when you didnt have so many subs and things were simplier, no fancy shit waterstones or sharpening measure or whatever....

@davidprangnell5290 11 месяцев назад

If only you could bring back the theme tune too… dah dah dah dah dah dah daaaah…

@MaximumFatness Месяц назад

How about how to make a scandi into a scandi-vex on stones. Within reason, of course.

@predatorfp 11 месяцев назад

8xt

@paullmight42 11 месяцев назад

I know it's not really about the steel just the process but....eyetalian steels are soft af...

@LosRiji 11 месяцев назад

Newbie Tips: don't go faster then your Eyes can follow your fingers. Don't slip of the stones, leave the tip attached to the stone.

@johnwyman5939 11 месяцев назад

Dam good job on showing how too use wet stones and sharpening knife. Nice job on video. 🇺🇸🇺🇸🪓🔪👍👍

@Bill-mw7sh 11 месяцев назад

All the videos can't do it for you. You can't sharpen with stones until you teach yourself and do it.

@joelhunter984 11 месяцев назад

The voices in my head said "Stay home and sharpen your knives" so I did and now I have no hair on my arms and legs!!! I have lots of knives.

@LosRiji 11 месяцев назад

Here my top sharpening Systems: shapton kuromaku (cheaper but equaly as good as naniwa chosera), Venev phoenix and dragon series, literally every vitrified resin bonded diamond stones like Adelmayer, Spydercos (306UF) ceramics. For EDC Fällkniven has the DC4 and CC4. Trust me DMT isn't worth the money. 200€ not well spent, it'll cut probably everything but the Feedback is shit

@onnoreimers3793 11 месяцев назад

First comment

@Naturescalling-di5no 11 месяцев назад

Why did my subscription get deleted youtube?????

@DutchBushcraftKnives 11 месяцев назад

Glad to have you back though!

@timothyfranklin473 11 месяцев назад

first

@k.n.v.b1113 11 месяцев назад

shut up Martin let Micky speak !

@jackfranks7160 11 месяцев назад

You forgot the MOST important tip when using stones. Make sure your fingers aren't rubbing on the stone when moving the knife back and forth.....not that I would know from experience.....😬

@DutchBushcraftKnives 11 месяцев назад

Hahahahahahahahhaa

@Bobby_Digital_23 11 месяцев назад

Sharpening or regrinding a convexgrind is something you begin to feel yourself with experience. Its hard to explain a feeling that is not common. These guys did it again! made a great job in it.

@laptophygieneplusmore166 11 месяцев назад

Thank guys for that final piece to finishing my knife sharpening learning. I was always making my knife dull when stropping but finally I shaved my arm hairs and part of my thumb 😂RIP thumb but damn it I got down

@The4cp 11 месяцев назад

I'm going to have to get the work sharp you guys reviewed. I'm awful at sharpening.

@ronniejarvis2679 11 месяцев назад

I was really starting to miss the old sharpening videos. Glad to see a new one

@achimgeist5185 11 месяцев назад

I use a 400 grit diamond plate for reprofiling or edge damage, for sharpening shapton 1000 grit and 2000 grit ceramic stone, polishing with a shapton 5000 grit ceramic stone and end finish with a leather strop with 0.25 micron diamond compound.

@thomasdeanda2360 11 месяцев назад

Thank you for all the education on knives, your channel has inspired me to go and enjoy the outdoors. Thank you gentlemen.

@DutchBushcraftKnives 11 месяцев назад

Thank you for your kind words!

@ericsmiley1266 11 месяцев назад

I wish I had friends like you guys. Thank you for another good video.

@joeh7299 11 месяцев назад

Excellent show gentlemen! Very instructive.

@DutchBushcraftKnives 11 месяцев назад

thank you!

@thefeatheredfrontiersman8135 7 месяцев назад

Martin, could you and that other guy(lol) do a video on your personal favorite sharpening stones. Coming from a guy that learned freehand sharpening from a series of diamond rods and files, I've really wanted to get into whet stones and ceramics. Another thing I've been trying to do is get a edge and hair to actually wittle. Shaving sharp is no problem but it's that final 10% I need help with. You and that other guy are awesome.

@monapow1 11 месяцев назад

Hello, can you guys do video on aurora 2 cpm 3v please? or just tell me here what is your opinion in comparison with aurora scandi 3v etc. Thinking to buy but there are no reviews