How To 4/6 Drop Your NNBS Silverado Or Sierra!Using DJM Control Arms Or Springs/Spindles&Flip Kit!

Подписаться 4,6 тыс.

Просмотров 35 тыс.

50% 1

Welcome to a new step by step how to video from Proyectos Los Carnales! Today Pablo brought his HD Silverado and Angel brought his NNBS Silverado to get dropped and give us a cool video! I go over a step by step with as much detail on how to lower your Silverado or Sierra NNBS mamalona. If you have springs and spindles to lower the front you can start at 00:32. If you are doing the DJM lowering control arms you can start at 18:43. To do the flip kit lowering the rear of the truck 6/7 inches start at 08:00. Enjoy the video and if you like it Like, Comment, and Subscribe!

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@angelmeza2894 2 года назад

To anyone who bought the mcgaughys kit and can’t find a way to remove the bottom bolt of the rear leaf spring. you should remove the tow hitch to have the clearance to pull it out

@josuegonzalez9364 2 года назад

Do you think you’ll have camber with just 2 inch drop springs?.. Really want to drop my truck 2/4 but don’t want to mess it up

@proyectosloscarnales4512 2 года назад

yes usually the springs give it camber you might get away with just a alignment or running a drop spindle instead of drop spring

@elwerogaming1331 5 месяцев назад

My truck bed hits my differential when ever i hit a bump what can i do

@elwerogaming1331 5 месяцев назад

4'6 drop

@elwerogaming1331 5 месяцев назад

4x4 08 4 door sierra

@JesusOrtiz-qp1so 3 года назад

I’m surprise how good English this tacuaches speak lol

@frankieknuckles3 Год назад

Them parts got dirt all ove we them

@jaybizzzird 3 года назад

What’s your ig bro? Very detailed video, thanks

@frankduran6062 3 года назад

Hey bro i have a 2012 Silverado i have 22" on i want to lower it so the gab is not the big would this help if i change the arm controls

@proyectosloscarnales4512 3 года назад

Yea u can use lowering control arms or the spring and spindle in the rear u can use shackles or a flip kit or both with a under bed notch

@boostedjrrr 2 года назад

Can you use lowering springs with the drop control arms to get like a 6” front drop or do you have to use the stock ones?

@cruzolivas6319 2 года назад

If u take off the 1in block it’s 6in no? And if you leave it it’s a 7in

@edgabrielcervantes9707 3 года назад

buen video amigo eres de los pocos que ensenan como hacerlo mi pregunta cual seria el mejor metodo arm or spring o spindless cual de los 2 recomiendas para que la troca quede bien como de agencia gracias de antemano bro👍👍👍👍👍👍👍👍👍👍👍👍👍

@proyectosloscarnales4512 3 года назад

Con los control arms se maneja más cómodo como agencia y gracias

@ronieramirez4842 8 месяцев назад

How much does the truck bed weigh

@ericmonsivaisem 3 года назад

Doesn’t the ball joint on upper control arm bolt to the bottom not top ???

@Angel-ft8bv 3 года назад

Pretty sure it's bottom

@senditscott4735 3 года назад

Bang bang drop gang!!!! 👏

@jefferyknudsen4028 2 года назад

Great video, can you add the stuff your purchased for the 2500 in your comments area please?

@proyectosloscarnales4512 2 года назад

The black truck got lowering control arms you can find them at djm suspension or ihc suspension

@belikianza5097 3 года назад

Just saw the 03 Silverado on the freeway

@Angel-ft8bv 3 года назад

Did you install the shocks correctly on the first truck. They look upside down. Another's thing, I think you are suppose to put the upper balljoint under not over.

@jameshaney1237 Год назад

You are very therral with your instructions on your videos . I will be doing the same to my 2008 Silverado rcsb. Glad to see it can be done in 1 day Thanks , JD HANEY

@milofuentes1088 3 года назад

BADASSS video well done bro gained a sub for sure

@gallo2low664 3 года назад

Thanks this video help alot 💯

@Lucky_Logan 2 года назад

Damn looks like that truck needs some brakes, those toros look absolutely toasted. Put some money into the brakes need major maintenance instead of customizations

@deez3936 3 года назад

You think a aftermarket strut assembly would change the drop? My tire sticks way out and I cant get the guys to get my truck aligned.

@proyectosloscarnales4512 3 года назад

Usually the upper control arm helps with alignment issues they also make specialty upper ball joints it all depends what’s going on with it

@patrickoshea9527 3 года назад

Get off set upper control arms

@erickuribe9860 3 года назад

Just subscribed. Nice work man 👍

@trucksonlytv9976 2 года назад

Nice work!! Love that look

@robertcolunga6479 2 года назад

Did you use the stock spindles with the drop control arms ? I put some on my truck and didn’t fit on my stock spindles. I hat to put the drop spindles so it gave me about 6 inch drop in the front and it’s to low.

@proyectosloscarnales4512 2 года назад

Stock spindles but check the ball joints on the lowering control arms because the nnbs had some trucks with aluminum spindles and some with steel spindles from factory and they have different ball joints one is bigger than the other

@robertcolunga6479 2 года назад

@@proyectosloscarnales4512 damn that might be the problem. I’ll be checking up on that soon bro, thanks for the info, I appreciate it.

@proyectosloscarnales4512 2 года назад

Based on where you got the arms they have replacement ball joints just get the opposite ones from what you have now. Start there bro 👍🏽

@robertcolunga6479 2 года назад

10/4, thanks a lot bro 🤘🏽. Great video you made here.

@angelmeza2894 2 года назад

where did you buy the lowering spring from? i already ordered the same kit for my nnbs extended can

@dannydaniggaz23 Год назад

How much does the angle of the differential and driveshaft change?

@lsgt5132 2 года назад

Let me guess, you guys are in TX. Damn wish you were in NC.

@hadnotandsons9308 3 года назад

nice informative video

@BassRocket 2 года назад

bueno

@Esojesuss 2 года назад

You think that if I get the flip kit done and drop it 6 inches alone with that, do you think I could keep my 2 inch drop shackles but just move over the bolt to keep it at 7 inches without needing a c notch

@proyectosloscarnales4512 2 года назад

Honestly it’s based big on driving style you can possibly get away with it if you do not carry heavy stuff but if you plan on carrying heavy stuff I’d recommend stock shackles or a c-notch. Worst case scenario try the 7 inch drop and see how it feels for you the stock shackles only take 30ish minutes to swap if you need to swap them.

@corridosmascabron784 Год назад

🔥🔥

@2wdDenali 3 года назад

Do you like the control arm drop or the spindle and spring drop more and why?

@proyectosloscarnales4512 3 года назад

Control arms they are better when it comes to alignment if you go lower than 4 inches

@2wdDenali 3 года назад

@@proyectosloscarnales4512 that's what I went with. Thanks for the very informative video!

@proyectosloscarnales4512 3 года назад

@AlteredMood Glad it was helpful and worked for you, that’s why I like doing them!

@AlejandroMartinez-iy8ry Год назад

I see the video every time I drop my truck

@rubensalais1502 9 месяцев назад

Great video explaining everything

@santiagocisneros3002 Год назад

Where you located at pa ?

@alexolvera3059 3 года назад

Where u guys aré located

@Mffl1014 3 года назад

Any camber

@proyectosloscarnales4512 3 года назад

Not with the control arms you can always buy after market upper control arms and do an alignment so you won’t have camber when lowering these trucks

@cruzolivas6319 2 года назад

If I just install lowering front springs do I still have to cut the lower ball bolt to run 17s?? And can I still use that 1in block to run 6in or do I have to remove? Thanks I’m advance

@proyectosloscarnales4512 2 года назад

I believe its only for the 4 inch drop that you need to cut ball joint to fit 17s and that rear block is specific to stock differential location after the drop you have to buy a lowering block if you want to lower it more or just throw it out and have a 6 inch drop with the flip kit

@cruzolivas6319 2 года назад

@@proyectosloscarnales4512 thanks bro appreciate it👌🏽

@cruzolivas6319 2 года назад

@@proyectosloscarnales4512 I did the same thing i you u did and some how it went like 8inches it bottoms out hits hard on bumps it has stock shackles