No video :(

HOW-TO: ADJUST CALTRACS Properly (Full Procedure Explained), SET UP LEAF SPRINGS Traction Bars DIY !

Подписаться 1,9 тыс.

Просмотров 49 тыс.

50% 1

Clear and Simple Instructions to set up "one-turn" preload on classic truck Caltracs. (trac-bars) If you have any questions about part numbers, where to buy, tools, anything - feel free to ask in comments. I will reply promptly and in detail to help dial in your basic setup. This modification is a MUST if you have wheel hop, traction or bouncing issues. Basically any truck or car with leaf springs that you plan to drag race or even do street burnouts / launches in. Don't forget to LIKE / SHARE / COMMENT / SUBSCIBE, your support of our channel enables us to create more and better content.
Check out our COOL NEW NITROUS T-SHIRTS:
lsxnos.com/shop/ols/products/...
Hit the drag strip just a few days ago after we returned from FL2K:
• My type is about 5.3 o...
VISIT US AT lsxnos.com/
You can support our efforts on Patreon HERE by becoming a VIP Member: / torquesouth
Positraction needed! Watch before and after races with a welded differential. Did it make enough of a difference?
• Fire and NOS
Nothing but intake and exhaust and I can still beat the local track legend with my 5.3
• Enter Plan C
New tires and racing wheels means trouble for the hopeful Civics and 350Zs
• "Kill Mode" - Lady Rac...
Sometimes when you race it hard, you have to work hard to fix it after......but its always worth it!
• WHAT HAPPENS WHEN SHE ...

Опубликовано:

13 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@terramaas8263 Год назад

Good explanation of what to do

@TORQUESOUTH Год назад

Thank you so much I tried my best no expert just trying to demonstrate what we learned from others on own truck. Works good

@ivanpena6774 Год назад

VIKING Still kicking like kung-fu 💪🇺🇲✌️

@sierra6 4 месяца назад

Guys on youtube absolutely love adjustable wrenches.

@TORQUESOUTH 4 месяца назад

Definitely not a real mechanic

@hotrodray6802 4 месяца назад

Not a thing wrong with adjustable wrenches as long as yours fits well, not floppy, as cheap crappy ones are.

@MrBensonjames 2 года назад

well ok !! u didnt tell everything!! is someone sitting in the truck ?? is it 1 turn at u touch the leaf ?/

@TORQUESOUTH 2 года назад

Good point! Yes the driver was in the vehicle, and I jounce the suspension to try to settle it before adjustments on a level surface. Also I try to have just over 1/4 tank of fuel like we run at the track. And yes exactly 1 turn after barely touching. I actually use a zip tie for a drag resistance test to see when they're touching equally (slipping it in and out under the roller until I can't).

@kevin_nagle 2 года назад

You really need to have the vehicle race ready, meaning how it sits in the staging lanes: Driver or drivers weight equivalent in the drivers seat, Proper amount of fuel, coolant/water, ballast ect., adjust tire pressures, adjust shocks (if adjustable).. also you don't have to "jounce" or whatever you're calling it... just push down on the bumper a couple of times and let it settle.. after a burnout that's how the vehicle is going to be sitting when you stage. Rocking the truck side to side back and forth is giving you those inconsistencies. Just my .02 but i've been setting up Caltracs like that forever.

@TORQUESOUTH 2 года назад

@@kevin_nagle thank you

@ivanpena6774 Год назад

Teaching The Masses Utube University Bye Way Of Torque South

@hotrodray6802 4 месяца назад

SMH at the commenters. **** Personally I dont like the looks of stuff hanging down under my car. I do leaf springs the old school (sleeper) way, it works.... But not as convenient.

@Cougar5099 Год назад

Why so tight on the lock nut ?????

@TORQUESOUTH Год назад

Didn’t want it to come loose? 🤷🏼‍♂️

@dr.peppertruck1817 3 года назад

So loosen joust and spin till the roller touches the leaf?man I just slapped mine on and went to the track haha didn’t even adjust but I did get a 1.61 60ft

@TORQUESOUTH 3 года назад

That’s amazing 🤩 yes we also saw HUGE improvements before even adjusting. I think possibly very little preload is the key. What setup are you running?

@jasonwillis-hi9ve Год назад

calvert says a half turn preload

@roderickeash3216 Год назад

Can't understand what you're saying, can't see what you're doing, and what kind of mechanic uses a Cresent Wrench?

@TORQUESOUTH Год назад

Thanks for watching and thanks for your comment. We are always seeking input from experts so we can improve 👍🏻

@jubjub905 Год назад

What mechanic doesnt have one?

@TORQUESOUTH Год назад

@@jubjub905 I appreciate all you guys taking the time to motivate me to do things the right way. Each day I strive to be more professional and I value the constructive criticism 👍🏻🙏🏻

@TORQUESOUTH Год назад

@@jubjub905 😂😆😭👍🏻🤜🏻

@kevin_nagle 2 года назад

Please explain... "JOUNCE" 🤨

@TORQUESOUTH 2 года назад

😹😃 I promise I won’t say it any more if it bothers so much 😭 I’m not an expert… for the short 17 years I worked at the local GM dealers as a master tech this terminology “JOUNCE” is used in SI (Service Information / Literature) as an effort to settle the suspension for alignment and similar purposes using the human body. It rhymes with bounce so… For instance you replace a control arm then you bounce your body on the bumper to let it settle in before performing alignment on a Hunter / Beam machine. I have heard stupider terminology such as “judder” - a word that doesn’t actually exist. As stated JOUNCE is terminology as well as instruction directly stated from manufacturer instructions. That being said we always open to learning, so please feel free to correct and inform us 🙏🏻 much appreciated! 🏁

@craigcontofalsky4387 3 года назад

Get rid of the damn crescent wrench!! Use a proper open ended box wrench!

@TORQUESOUTH 3 года назад

You’re right it would have been a lot easier 😆 kind of in a rush to get to the race track and did not want to step out to grab other tools 😁🔧🤷🏼‍♂️

@lifestoshortbed5027 3 года назад

Caltracs sells the wrenchs for adjusting. Its alot easier using the correct tool. And full turn is to much.

@RealSteelStreet 2 года назад

@@lifestoshortbed5027 yep, only 1/4 turn is recommended 👍🏽

@Anarchy-Is-Liberty Год назад

@@lifestoshortbed5027 Fuck that, I put 7 turns into mine!! Also, I used a big ol' 8 lbs pipe wrench to tighten mine down!! I tightened them suckers until the threads start moving!!