How to apply thermal paste on Asus ROG Strix| how to clean fans| disassemble| Artic MX4| GL503 

Note: This video is for information purpose only, I'm not responsible for any damages

Such a good Video It even shows The laptop turning on!! You just gaing my sub mate!

Thank you so much. I was thinking about replacing my laptop, but repaste was all it needed and it is no longer slow after longer use. Thank you again!

thank for such indepth video. i also own gl503 for about a year now. im not repasting it yet as the temps are satisfactory but will definitely do it in a year or so. thanks✌️

Thank you so much! this is my first time opening a laptop and this tutorial was very detailed and helped me a lot 🤩🙏🙏

Hey, thanks for creating this video, it was very helpful for me. I did use the same thermal paste Artic MX4 since it was promoted even in Asus forums regarding thermal paste, And I got an idle temp of 38-45 and load temp of 75 (Celcius).

Really nice video i never did something like this before and this helped me so much

Thanks for the help, mine for some reason doesn’t have numbers so it really helped me in removing the heat sink

Very Detailed video Man, I needed this - - - - -I really appreciate the time and effort it took you - - - - -My silly laptop fans be sounding louder that a Night Club; driving me crazy - - -But thank again for this mater piece - - - Tho no voice it was still great and extremely helpful 🙌🙌🙌🙌🙌 🔥🔥🔥🔥

Very well explained. Thank you for this video.

Thank you! Its a really helpful vid 👍🙏

Hi great video, though my fan and heatsink doesn't have the numbers on near the screws. can you possible make a picture with the fan screw numbers to take out? thanks

well done , helped me . Thanks mate

thank you for this tutorial it helps me alot.

Is the Thermal Grizzly brand any better?

thanks brother. was really helpful to me

Do you kniw if I can change the whole thermal heatsink? Mine isn’t covering the smaller chip at bottom left of the heatsink, near the battery. I saw in some of the other videos that the heatsink is different. Can you tell me what that chip is? I think the service engineer mixed up something . My cpu temps spike to 88/95 suddenly from 82ish when gpu stays at 80. If possible I would like to get another heatsink or fan and swap them. So many questions! I need answerers! I have a gl503 ge scar

Highly detailed video, thank you! How are the temps after repasting? Like, while stress testing or gaming.

Nice one really helpful

thanks dude :)

I was searching for this and yt recommended me

what component is that one top-right of the cmos battery, the one with the black and white small cables entering? The white cable in my pc unplugged and won't fit anymore. After that my bluetooth headset constantly crackles, is it related?

Gonna do it tomorrow! Wish me luck

Good video !!

Great video! I do have a small issue though, I've reached the 6-5-4-3-2-1 screws but the 6, 4 and 2 screws (the larger ones) are stuck and won't come out. What should I do?

I used GD900 thermal paste for this ROG, now extreme full load condition hit 74ºC after 5 minutes without overheat warning. Before with full dust in heatsink CPU temp hit 90ºC with overheat warning and CPU throtling.

i have a problem i changed the thermel paste but when i turned it on it didn't have picture or sound after that i took out the second ram out and it did work even when I put a new ram in the slot it don't turn on does any one know why

Would you like to upload Tutorial Video disassembly Asus ROG GL503VS (Fan, thermal Paste, heat sink, etc) Please? Thank You.

Sangat membantu, terimakasih ^^

How much temp difference did you get.

Bro i have coolermaster mastergel regular with flat nozzle do i need to spread the paste or just leave it as you did.

Hey Adish, can you tell me which screwdriver u used to remove Fans from the heat-sink. They have very screw and i dont have the specific one. From where did you buy it, pls

If this is gl503ge model, then can you tell me what was the gpu temperature while gaming. I did the repasting, the clock frequency definitely improved, but the gpu sits at 90 degrees Celsius

Bro thanks for the video.. can I use hand Sanitizer as isopropyl alcohol?

Bro which among them is the hdd? My hdd seem to got cut off cuz of loose wires or something. It is not getting recognised anymore. I'm thinking of opening the laptop and just fixing the lose wires by myself. So which one is the hdd? Is it to the right of battery?

Thanks for helping me

Nice video.. i ve gl503 vm... And while gaming temp goes to 97©.. i need this video. Thanks for sharing

Bro can I use Artic MX-5 instead of MX-4 at the same quantity? Or is the MX-4 better than MX-5? Also my left fan is tighter to rotate while the other fan spins freely. How do i fix it?

Hi! I'm about to clean mine as well. I bought a thermal paste online, but as I have read in the comments section, others are not applying the thermal paste since they don't need to re-apply yet. My question is, how do I know if it's time to re-apply the thermal paste? My laptop is 2yrs old now btw.

61°C is it idle temperature? I'm asking because you've just launched ROG Gaming Center app from the desktop without running any kind of stress test in the background. my idle temperature is 43°C without even repasting.

Which screwdriver works for the Small Screws of the fans? I opened up for cleaning purposes but wasn't able to find such a small-sized screwdriver... ALSO, wondering, What are temps After applying paste during gaming..?? Thanx for the great Guide...!

Nice one

So I was doing this. Just to clean fans cause mine had started to stutter, now the laptop won’t start up. I didn’t repaste, I’m curious as to what happened wrong, or if there’s any insight toward that..

What screwdriver set do you use brudda? The fan screws are so small.

Still looks pretty hot, 65 with no load?

Adish bhai i own same laptop from 1 year 4 months now . I use it for normal work & i played games just few handful times. What do you think do i need to go for cleaning & thermal pasting ?

what were your temperatures before applying the paste?

Wish I could do it myself as well, but it's just too complicated to me.

Mini nuts on fan is safe to open??

How was Arctic mx-04 thermal paste? Should i buy this or some other?

I want to open up my laptop to clean the fans, but im scared pf scratching it.... bcs after i remove the screws, the cover won't come off

One of my fan needs replacement. Can you tell me the model no. of the fan and from where I can buy it?

Is 1g enough for this ?

I was doing the same thing as what you did in the video but now my screen won't turning on, can you help me? :(

How are the temps now after almost 5 months

Over 60 degrees on idle is still too much. I have similar laptop and after cleaning and changing thermal paste i got 50 degrees.

But asus has already applied liquid metal then why ur laptop doesn't have ?

He said scraping up the paste like asus even put any lol

Bhai plz "PUBG PC" download karna dikha dijiye

I cant find the number 1 screw to open

Bhai Power Cored Disconnect karleta yaar 🤣🤣🤣🤣