How to assemble and turn on the front and rear light cable lines for suzuki smash, sogun sp 125 or satria fu.
The hang step we have to do first is to know the path or function in the kiprok socket pin, namely:
1. The yellow wire with the white line that there are 2 wires on the bottom left is the main current of the lamp from the road spool which goes directly to the kiprok and the other cable will go directly to the on of the lamp switch.
2. the black and white line wire is as a mass or ground, make sure it must be attached to the frame or motor body.
3. The white cable with the red line is for charging current from the road spool that goes directly to the top right kiprok and make sure there must be a current.
4. the red cable under the right of the kiprok pin socket is as a stray current from the kiprok that goes directly to the battery and is also connected to the ignition.
To assemble the line, make sure the current of the yellow wire, make sure the white line is there and arrive at the on of switch.
then the current coming out of the on of switch will be connected with the foxy or dark blue color cable that is on the far close switch.
and the output from the switch is closer there will be 2 cable colors coming out
yellow and white and directly connected to the pit where the lamp is.
and the mass that is on the side of the lamp, make sure it is connected to the frame or motor body.
And for the back light path, take the current or connect it from the output of the on of switch to the back and make sure the lamp is connected to the frame or motor body.
Thank you very much to all #SUBSCRIBER#and viewers wherever you are, hopefully the knowledge is useful.
please # SUBSCRIBE AND LIKE #
#SIDIK NURYADEN CHANNEL#
If you have any questions, you can write them in the comments
Tel/WA: 085863491419.
Thank you very much.
9 сен 2024
