How to check the headlight cable line, horn, Suzuki smash, shogun. The first step we have to do is check the 12 volt battery current line that comes out of the contact after being turned on, namely the orange cable.
1. Check the orange cable sen cable that goes into the pleser socket, and from there it will enter the pleser and exit through the pleser with gray color and flash to the sen switch. gray and the left are black, both front and rear. And make sure the time is attached to the motorcycle body with black and white stripes.
2. Check the horn cable path, which is to make sure the current from the 12 volt battery after the ignition is turned on right up to the horn. Then check the time line that goes into the horn button switch and the dark green horn cable output is connected to the horn. So what is disconnected is time line. and will be connected when the horn is pressed when the switch button is pressed.
3. Check the front light cable path, far and near to the lamp pit and the white wire as a close distance lamp. To check it, use a rigging light input into the yellow cable socket, white line and black and white line.
The function of the color of the cable:
1. orange cable as 12 volt battery current after the contact is on right.
2. black wire white stripes as time.
3. ash cable as the output current from the penny pleser that goes to the cent switch.
4. yellow wire with white line as lighting current that comes out of the kiprok on the right and goes into the on of switch.
5. white wire as a short distance light path.
6. plain yellow cable as long distance line.
6. the ash cable as the right cent stun line.
7. black wire as the left cent stun line.
Thank you very much to all #SUBSCRIBER#and viewers, hopefully the knowledge is useful.
Please #SUBSCRIBE AND LIKE#
#SIDIK NURYADEN CHANNEL#
If you have questions, you can write them in the comments.
Tel/WA: 085863491419.
Thank you very much.
15 сен 2024