Enlace al helicoptero:
www.banggood.c...
STEPS:
1.- Connect the battery to the helicopter.
2.- Select a new model (System - Model Select) on the transmitter. Name it (System - Model name).
3.- Change the AFHDS 2A mode and set simple AFHDS mode (RX Setup - AFHDS 2A - Off).
4.- Set the type of aircraft (System - Type Select - Helicopter - Fixed Pitch).
5.- Set the transmitter in MODE 2 (System - Sticks Mode - Mode 2). In this mode, the stick on the left controls channel 3 (rotor power) and channel 4 (movement of the helicopter tail). The stick on the right controls channel 1 (forward-backward) and channel 2 (left-right).
6.- Turn off the transmitter. Press the BIND key and turn on the transmitter without releasing this key. Release the BIND key. Turn off the transmitter. Turn on the transmitter. Move up the left stick in order to check if helicopter has linked with the transmitter.
7.- Reverse channels 2 and 4 (Setup - Reverse)
8.- Set the response rate of channels 1, 2 and 4 to 50% (Setup - Dual rate / exp.). Changing the Dual Rate modifies the response of the helicopter to the sticks. By lowering it to 50% the helicopter responds more smoothly to the movement of the sticks.
9.- Using Switch A we can change from normal mode (Dual Rate at 50%) to sport mode (Dual Rate at 100%). In sport mode, the response of the helicopter is more aggressive.
10.- Trim channels 1, 2 and 4 to balance the helicopter (Setup - Subtrim).
This helicopter may needs some mechanical triming. There are videos about it on RU-vid (v911 mechanical trim).
10.- Go flying.
20 авг 2024
