How to Bleed ABS Brakes on a Harley Davidson Touring Street Glide

Подписаться 27 тыс.

Просмотров 155 тыс.

50% 1

Learn the quickest and easiest way to bleed ABS brakes on a Harley Davidson! This method will save you time and headaches.
To Purchase Brake Bleeder Kit, visit our store HERE:
▶︎ bit.ly/2sHihFZ
Click HERE to visit our website:
▶︎ hillcountrycus...
Located in Austin, Tx, Hill Country Custom Cycles is a Harley Davidson handlebar expert that has been in business over 15 years. Through years of sales of Plug and Play™ kits and custom Harley handlebar fabrication, we've come know the potential frustrations of installing new handlebars for your ride, including new cables. Follow along as we simplify the a potentially frustrating part of the process, brake bleeding, and brings years of industry experience to make your life easier.
HCC aims to provide you with simple, yet high quality how-to videos and product reviews. Stay tuned for more and click HERE to subscribe!
▶︎ bit.ly/Subscrib...
If you have any questions about the brake bleeding process, please comment below or email us at:
▶︎ CustomerCare@HillCountryCustomCycles.com
Or give us a call:
▶︎ (877) 755 - 4455
Check us out on Facebook:
▶︎ bit.ly/HCCustom...
Thanks for watching!
Your friends at Hill Country Custom Cycles
*Disclaimer: This video is intended for educational purposes to help you perform this brake bleeding yourself. All steps are performed by a professional and although we believe most people can do this, if you don't feel mechanically inclined enough to work on your motorcycle then please consult a professional. If the brakes are not bled properly it can make your bike a danger to yourself and others on the road. So be smart and please consult a professional if you're unsure of a certain procedure.

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 165

@Jay-uo6wb Год назад

The process in this video worked perfectly for me. Thanks a million. The only thing I did first was to bleed all of the old fluid so I was not pushing old fluid up.

@rickyhawkins7407 2 года назад

I just found this video. I need to change the fluid in my brakes and hydraulic clutch due to the fluid being contaminated with water. I will use your tools and system to get this done. Thanks for a very informative and cost saving video.

@jodymcclure1300 5 лет назад

Just got quoted $145 to bleed just my front brakes on my 13 RG, glad I found this....

@jtoyhauler8084 3 года назад

Use on 2011 street glide with abs. Works!!! No dealership needed. Brakes are 💪. Saved my customer time and 💰. Thanks HCC

@BigStakes 4 года назад

Thanks for the knowledge! Had to rebuild the front brake master cylinder on my 16' RGS and this video saved me $500! Screw the stealership!

@emiller2236 4 года назад

Just wanted way, I have had non stop issues trying to bleed my brakes on my M8 Lowrider S . Had the pump handle, the vacuum pump, all put air in my lines . Ordered your little tool, took 5 days, and 5 minutes to actually do the work. My bikes been down 3 weeks until I saw your video. I did push to hard on the left side and shit fluid across the room lol Great product thanks man

@FranBunnyFFXII 4 года назад

So this worked for you? Nice. Im gonna be getting a 2020 Fat Boy, and was looking for a way to skip the dealership fee for bleeding the brakes.

@emiller2236 4 года назад

FranBunnyFFXII yeah it was an Instant, worked so good. Just be slow I shot that shit through hard at first and it rained in my garage.. but successful

@FranBunnyFFXII 4 года назад

@@emiller2236 Good shit. Great to find a way around the dealership computer and fees.

@emiller2236 4 года назад

FranBunnyFFXII exactly

@derekpennington4116 5 лет назад

Thinking about putting 14in bars on my 16 street glide. Worried about taking the bike to the dealership to bleed the a.b.s. system. Relived I found this video. Thanks!

@chriskeaton1956 Год назад

Did it work for you

@MatthewEvansRN 7 лет назад

Just wanted to add to say thanks for this. While I didn't need to bleed the bike, I accidentally got air into the upper line while trying to sort out a leak at the connection point. Your trick about opening the master cylinder and squeezing the throttle helped pull those air bubbles out and re-firm up my grip. Now to figure out how to fix the leak.

@HillCountryCustomCycles 7 лет назад

+matt e Awesome to hear the method helped you fix an issue, we appreciate the comment. Good luck on fixing the leak!

@027MC7 4 года назад

Never seen it done that way. SUBSCRIBED!

@heybruh3274 Год назад

One if the best videos ever. Still have luddites that don't get it. Key thing is that it doesn't take much effort to push "old" fluid from the ABS.

@JP-kz3lh 2 года назад

This video helped me tremendously. I was trying the old school way and it wasn't working. Did this way and good to go.

@thekevindentonroadshowlive9454 5 лет назад

I’m fixing to do my first brake job on my Harley.. this was great to see !!

@kenny553 5 месяцев назад

After replacing upper brake line I was able to use this method and had no issues with the ABS. Brakes feel good and work well. However, when I initially started to drive new fluid up the brake line, a very small squirt of brake fluid shot up from the master cylinder. Luckily, I had my tank covered so nothing landed on the painted areas. A few moments after this initial squirt, the fluid started to fill the master cylinder similar to the video. Next time I do this I will wear safety glasses and cover the entire bike.

@jobeta22 5 лет назад

I found your channel this week. I am extremely impressed with the amount of detailed information that you provide. And the music on this video was a nice plus. Keep up the good work!!!!!!

@bee_lovin 4 года назад

"What happens when you fart in a bathtub?" that line just earned you another subscriber lol. Glad to see boys will be boys. Thanks for saving me money and time!

@JETFILMCHANNEL 3 года назад

Excellent explanation

@adambrockie8532 5 лет назад

Dude thanks for the Wildside music!!! Motley rules! Thanks for the video

@ricardodelatorre2498 4 года назад

Hello Sir, Video makes total sense, and has worked well for my factory calipers, however, on my 2020 FLHX w/ABS, If I am installing a new set of front (chrome) calipers would I follow the following procedure? THANK YOU ! ! 1. Remove existing front left caliper 2. Install new front left caliper 3. Remove front master cylinder cap 4. Squeeze front brake lever to push caliper cups towards rotor 5. Now bleed front left caliper The above sequence makes sense (my assumption) because Im trying to fill the caliper with fluid prior to bleeding. Make sense? Thanks again! Love your videos!!

@alvingallegos6367 3 года назад

TYVM I bought your extension kit so time to get bleeding.

@Big88Country Год назад

Great tip and very easy!

@aes3939 4 года назад

At 2:11 while you were concerned with air in the tubing connected to the syringe, the tubing connected to the bleeder valve has a big air pocket that is immediately introduced into the the system.

@garybaldwin1061 4 года назад

I thought so too. How can air bubbles go up if they have to pass through the ABS module?

@HillCountryCustomCycles 4 года назад

+Gary Baldwin think about it. There was no air there to begin with, which is why the process works so well. The only air introduced is in the upper ABS line that you are changing, everything below that point is still sealed. Air only goes up, not down.

@marlonmills3257 5 лет назад

You always reply right away that's awesome I appreciate it!!

@djk2063 Год назад

This video should be renamed "How to bleed one third of your Harley's brake system, while completely ignoring the ABS module."

@majorpoopcramp 4 года назад

Dumb question, I can use this same method if I want to change my brake cables? Yes I have abs

@FranBunnyFFXII 4 года назад

Not a dumb question at all. This is the exact reason why I'm here. I want to do a bar install, and the bars need longer brakelines. So Im trying to figure out a way to do it without having to install and then go to the dealership.

@cj-by3fh 3 года назад

Great video! Thanks. For some reason my ABS light comes on now and local dealer says it needs a computer reset. Does this sound right and necessary? Your opinion would be greatly appreciated.

@ColoradoKC 2 года назад

cj, what was the outcome?

@heybruh3274 2 года назад

@@ColoradoKC I bet he was just trying to throw shade on this process. Some people just need to be coddled by the dealership. If the process seems complicated, by all means… go to the dealership!

@kimihiakapatu1572 Год назад

Thank you. Simple but informative.

@Schafudd 3 года назад

Just ordered! Thanks for the great info and videos!

@TheRonald6524 5 лет назад

Very nice !! I think you just built a better mouse trap

@guitarkidd9840 3 года назад

If I only need to bleed and replace my fluid. I haven’t replaced any line or introduced air in anyway to this point, do I follow this process as shown or is there additional steps to the process since I have dual calipers on a 2016 FLHTK.

@behnam22 3 года назад

I’ve tried that over 2 hrs and never worked. Had to take it in. The best $50 I’ve ever spent.

@devinlansberry4201 2 года назад

I just replaced my handlebars to 12” on my 2018 street glide. In doing so, I wanted to slightly change the angle that the line came out of the bottom of the master cylinder. I loosen the nut just a little too much and introduced some air into the line my mistake. From what I saw on this video, I should be able to simply remove the top cap of the master cylinder and slowly pump the front brake lever to push the air back out? Am I thinking of that correctly?

@jimbo4260 Месяц назад

That was for the front brake. My 2019 limited also has a rear brake fluid reservoir by the rear brake pedal. What's the procedure for that and does any of this fluid pass thru the abs motor?

@shovelhead56 2 года назад

Thank You and appreciate the video. One question, does the ABS module contain any fluid that I should be concerned about? I recently picked up a 2014 ultra limited with 11k miles and am quite sure the fluid has never been flushed.

@tommybrannon 2 года назад

Yes it does, but nothing to be worried about. When you flush and bleed your back, ride it up the street slowly pumping the back brakes several times, come back...flush again, All New fluid. Sounds like a pain & waste of time, money, effort but it's cheaper than HD.

@seanmyhre1305 2 года назад

Please tell me how this fills the new brake line that goes from the abs mod to the master cylinder on the handlebars. Wouldn’t this just fill the front

@rickmetzler3054 Год назад

This comment touched on this: "What I have seen is that you change the fluid first. Then take the bike out and hit the brakes hard to activate the ABS. This will open the ABS and the fluid in the ABS will release into the system. Then you rebleed and fill again. This time you should have pretty much all new fluid in the system"

@seanflorian3348 7 месяцев назад

Do you still need to only do one side? I have dual disks in the front with ABS. Replacing the top brake line after a riser install with a longer cable.

@vf12497439 6 лет назад

Thank you for posting this video!

@brandonmccourtney805 5 месяцев назад

What if you do change the bottom brake line? I changed my full brake line and did this but I have no pressure.

@wolfemanbog4176 6 лет назад

2014 street glide non abs changed out the pads twice and never bleed brakes after install , never had any issues beside dust

@indianacardguys7440 5 лет назад

I read through all the comments and just want to make sure I have this correct. Im about to do a bar swap and gong to replace the upper and mid brake lines but will be using the existing lowers. Using this procedure to bleed the brakes afterwards I shouldn't need to worry about purging the ABS module correct?

@HillCountryCustomCycles 5 лет назад

+Toner Stoner that is correct

@RealRonTV 3 года назад

Will this work on a 2020 Road Glide? I heard this method no longer works on newer bikes?

@davidcarpenter5589 Год назад

It dosent

@aospwill Год назад

My 2021 just built up pressure in the syringe and never could get the caliper to take any fluid. Mine is a 2021 with rdrs.

@SantaPlaysPickleball 6 месяцев назад

I think I may have messed something up. When I crack the blender nut and try to push the plunger on the syringe, I hit a wall. I can’t move any fluid. Wondering if my new braided cable from the abs to the front brake master cylinder isn’t connected correctly? I used the existing crush washers and not the new ones provided. (I didn’t see them in the package until after I installed it.) Could the size of the original crush washers be incorrect, not allowing fluid to flow through the banjo bolts properly?

@JohnnyRoggio 4 года назад

Great Video, but I have a Dumb question, ... What size wrench (for the Bleeder nut) will fit the 2017 Road King? I'm not sure & don't want to strip the bolt in the middle of trying to pull this process off. Thanks in advance, your videos are great insights to different ways of doing things.

@skognacious9680 Год назад

I am in the process of installing 14s, I turned on the ignition a couple times to make sure everything worked and I did not yet bleed the brakes. The line from the M/C to ABS module was changed will the Module have air in it now???

@BentheEVguy 10 месяцев назад

So what is the process if I drain the old brake fluid first

@weapons_grade_girth Год назад

I swapped my bars on my abs equipped dyna, and now i have no pressure in my front brake. Must have flipped the reservoir over... Did i get air in my abs system?

@MyGoldtop 7 месяцев назад

I had to put a longer line on my FLRT .It went from the master cylinder to the ABS Module,would this still work the same way ? Put taller bars and had to get longer cables both Hydraulic.

@popapi1970 Год назад

Do you have a video on taking the front brake line off the ABS module on a 2020 Road Glide etc? Trying too see is there a way too bleed that after banjo is remove too put one on that's new or have no fluid inside.

@bfiredude 6 лет назад

When you show a close up on bleeder valve with syringe hose attached, is this air in the hose I see?

@zero2sixty420 2 года назад

Read through 100 comments and I don't see anything about the rear brakes. Can we do this with the rear brakes?

@christopherwilkie2351 7 лет назад

Thanks for the info brother, I appreciate it.

@HillCountryCustomCycles 7 лет назад

+Christopher Wilkie No problem, glad we could help.

@bobgil3464 8 месяцев назад

What brake fluid do you recommend.

@christopherwilkie2351 7 лет назад

how do you bleed the abs system if you've replaced both hoses. the one from the master and the one to the caliper.

@HillCountryCustomCycles 7 лет назад

Do it the same way as shown in the video. However, you may have to take fluid out of the master cylinder once it fills up so that you can keep pushing fluid up from the caliper. This will help get all the air out of the lower line that is now being pushed up through the ABS block. Does that make sense?

@beri232 Год назад

So if I’m replacing an entire brake line with a brand new brake line and the fluid has all been drained from the reservoir…. Does this process still work or does the bike need to go in for the digital brake bleed bs for the abs?

@romubesombes 3 года назад

great video.does it work with a sportster forty eight?

@johngill8980 2 года назад

do you have to do that to each caliper front and back?

@ricksgs6130 3 года назад

Does it matter on the front brakes which side you do first?

@BrokenVineyards 7 лет назад

Very curious about the rear brakes now. The brake caliper is higher than the master cylinder. Suggestions?

@HillCountryCustomCycles 7 лет назад

+BrokenVineyards We apologize for the delay in getting back to you. The same method applies to rear brakes. We've had success with it, but the most important thing to do is check proper function after bleeding. If there's air appearing in the line, simply resort to the traditional brake bleed method.

@BrokenVineyards 7 лет назад

Awesome. Worked great for me. Just finished 2 Ultras at once.......Thank you !!

@vmcc9070 7 лет назад

Hello...same question here...any videos of the rear brake? keep the good work on, your videos ar very very helpfull...

@sequentialpacificbiodiesel7295 6 лет назад

Couldn't you just ride the bike and actuate the ABS and bleed the brakes I have done this on my car so I didn't have to use the dealership laptop to get the air out of my abs module

@ricksgs6130 3 года назад

Should you blead the left side first

@bmurry1954 3 года назад

Trying to bleed front brakes. When open the bleeder not much fluid come out, even with pump on it ?

@glennhaskell9589 2 года назад

What about the caliper on the other side does it need to be done too?

@d.mar.2624 2 года назад

I bled the front brakes. Everything felt fine but at slow maneuvering in the driveway, I noticed a couple of times, the front brake lever fell flat to the handlebar. I let it go and pulled the front brake again and it felt fine. Good and tight. Any ideas what could cause that?

@timgonzales9671 2 года назад

What if I changed my front brakes and now they won’t grab what do I gotta do to fix them to grab

@deerafael2063 Год назад

What if it's dual brakes? Do them at the same time?

@everettthoman2097 Год назад

will this work when i replace my upper brake line with my new bars the line that gos from front master cylinder to the abs module

@willgipson8885 Год назад

If I’m replacing my front brake line, I have to remove the lines going from the front manifold to the abs module. Does reverse bleeding refill those lines as well?

@lorinlewis23 Год назад

I have the same question

@theaveragemale 11 месяцев назад

What if you replaced your lower lines

@arkansastrey9694 5 месяцев назад

I wish my S.G didn't have abs . Alot of peoples fail because they just pooter around and never trigger the abs and it just sits there and stagnates

@deerafael2063 Год назад

Don't need to use the scan tool?

@JeffinTD 3 года назад

Any thoughts on the tools out there to communicate with the abs module for folks who would like to flush the pump and accumulator of old fluid?

@guitarkidd9840 3 года назад

What I have seen is that you change the fluid first. Then take the bike out and hit the brakes hard to activate the ABS. This will open the ABS and the fluid in the ABS will release into the system. Then you rebleed and fill again. This time you should have pretty much all new fluid in the system

@JeffinTD 3 года назад

@@guitarkidd9840 Yeah I’ve heard of that method. Apparently Snap-On and some other code readers can activate the ABS pump to make sure it purges.

@Chilllybob 2 года назад

I know this is just a demo but that's only one caliper the front has two calipers , you are supposed to bleed both correct?

@heybruh3274 2 года назад

Yes.

@dantehawkins6893 5 лет назад

I replaced my OEM rear lower brakeline with a new 3" extended line and need to bleed the new line on my ABS on 2014 HD Breakout. What is the best method to do this without causing air into the ABS system?

@armygreen82nd 4 года назад

Does this work with a 2019 Tri Glide after I install my new bars, mid brake lines, and upper brake line? I was told by the dealer that I had to take it to them because of the linked reflux breaking system.

@teewhy2602 4 месяца назад

But you still have old fluid in the ABS module.

@levialston1496 2 года назад

Now does that work the same for rear brake

@heybruh3274 2 года назад

YUP

@leedreamabeaittie5819 3 года назад

I want to know what bars those are?

@marlonmills3257 7 лет назад

any info on Rushmore bikes with linked system i want to change my calipers

@marlonmills3257 7 лет назад

so i couldn't just do this method to both calipers? sorry for the simple questions im newbie

@MrE1226 5 лет назад

@@HillCountryCustomCycles I'm preparing to order an ape kit from you guys for a 2018 Heritage. So this method will not work for the newer Harleys w/ the linked braking system?

@HillCountryCustomCycles 5 лет назад

+Q Nguyen Yes, it will work just fine. Air always goes up. I have a video on a 2018 Softail with ABS where we use this method

@MrE1226 5 лет назад

Hill Country Custom Cycles awesome! Waiting on my 14” HCC Hell Bent bars to come as we speak. Look forward to getting them installed.

@kennethestes2359 5 лет назад

How did you drain the fluid?

@gtownsurfcody 4 года назад

Kenneth Estes another syringe

@leonelrodriguesrodrigues3103 2 года назад

friend do you know how to fix error code U1040 Road king 2008?

@clydeholiday5907 2 месяца назад

Did you listen to what you said you have you pumped it you said you filled the line with air how would you feel the line with are need to listen to it again what you said

@deekay4002 Год назад

Epic fail. The title is misleading. This video does not address the fluid that remains in the ABS modules. They need to be cycled so new fluid gets into them and the system needs to be flushed and bled again. Not bleeding the modules leads to many ABS problems.

@arkansastrey9694 5 месяцев назад

So do it like this . Go out and do intentional hard braking , trigger the abs . Back to step 1 , rinse and repeat .

@nathanterey4303 5 лет назад

I was told when I replace my bars and add new lines I will need to present my computer after I bleed the lines. Is this true? I have a 2015 street glide special. It's the only thing holding me back from doing the job. Thanks!

@HillCountryCustomCycles 5 лет назад

+Nathan Terey Not at all true. Watch our brake bleeding video for ABS. It is simple

@davidhong4224 6 лет назад

No need check abs module?

@markthomas2667 3 года назад

Can't get the lines to take any Fluid. Syringe just builds up pressure around the bleeder valve. What should I check?

@aospwill Год назад

This is the same issue I had. I never got it to take any fluid at all. Is your bike RDRS equipped as well?

@HillCountryCustomCycles Год назад

I have had this happen too. Try opening the bleeder valve a little more. It has helped me in the past.

@markthomas2667 Год назад

@@aospwill It is and that was the issue. Had to take it to HD unfortunately.

@anthonymartillaro541 2 года назад

Does this work with rear brakes with ABS?

@heybruh3274 2 года назад

Yes. I did it this way and had ZERO issues.

@MichaelReedHill 7 лет назад

I have a 16 fxdwg, I'm putting bigger bars on it. if i only replace the lines going from the bars and to the caliper, not the lines to the abs, would this method work? or would i need to be concerned about something going wrong?

@HillCountryCustomCycles 7 лет назад

+Michael Hill You should be all good just replacing the line to the bars.

@hallcalvin78 Год назад

Had a shop tell me that with ABS the bike had to be hooked to a computer to bleed them

@vmcc9070 4 года назад

Thanks for sharing. If i have 2 front calipers, do i have to do this method in each one? Thanks in advance.

@REELTLK 4 года назад

So just do the right side and it bleeds entire front system?

@finley614 4 года назад

No you have to do right and left calipers.

@fotlitbowfotlitbow5514 Год назад

I think you misspoke. I believe you said we jave already filled the line up with air. I think you meant to say fluid.

@eide8701 5 лет назад

I’m changing out my levers and master cylinders on my 2016 road glide Special.Will this method work? Or do you have a video showing how to do that .

@HillCountryCustomCycles 5 лет назад

+Erik Eide ya, this method will work fine

@word302 7 лет назад

I'm replacing lines, calipers, master cylinder on a 2015 FLXHS. Can I do this without having to pay the dealer to bleed it?

@HillCountryCustomCycles 7 лет назад

+word302 Sorry for the delayed response, but no, you shouldn't have the pay the dealer to bleed it. As long as you slowly push all the air out of the lines with the fluid, you should have properly working brakes. When the master cylinder fills is nearly full and you're done bleeding, you may just want to give some slow pumps to the lever (like in the video) to assure all the air has been pushed up and out of the line. Hope that helps.

@word302 7 лет назад

Thanks for the response. Would it be a good idea to replace the lines one at a time? For example, replace the upper line and master cylinder and reverse bleed like in your video. Then replace the lower line and caliper and do a conventional bleed out the caliper. Or just replace everything and reverse bleed the entire system?

@HillCountryCustomCycles 7 лет назад

+word302 just replace it all. You could do about 1/3 of the syringe through 1 caliper, then do the rest through the other caliper. This way, your still pushing fluid up the entire time, and you get air out of both sides. Hopefully that makes some sense.

@plymouthrock3406 5 лет назад

I'm buy a 2015 Fatboy is this the same proceedure.

@HillCountryCustomCycles 5 лет назад

+Plymouth Rock Yes, this will work perfectly on that bike

@scottygafford9641 7 лет назад

I looked on your website and was unable to locate the tube and syringe part you were using. Any help as to where to look as I am sure I'm over looking it.

@HillCountryCustomCycles 7 лет назад

+scotty gafford Sorry for the delayed response, but we actually don't have those up on the website yet to order. They are included in some bar kits per customer request. But you're welcome to call the shop (512-264-7333) and we can send one out to you no problem. Just ask for the bleed kit.

@GreatEgret 6 лет назад

Hill Country Custom Cycles how much is the bleed kit?

@tomstarr4094 5 лет назад

What about the rear

@teewhy2602 4 месяца назад

UH, Brakes are kinda important on a bike. Im leaving it up to the experts to change my fluid and properly activate the ABS pump to flush it too.

@vmcc9070 4 года назад

diameter of the hose?

@christopherwilkie2351 7 лет назад

isn't that going to introduce air into the abs pump from the new caliper hose though. or do you just push it through from the bottom anyway.

@HillCountryCustomCycles 7 лет назад

+Christopher Wilkie it's going to get air in the abs block either way you go because you replaced both hoses. Now air is on the top and bottom. The nice thing about pushing fluid from the bottom is the fact that air always wants to go up. When you use a vacuum bleeder from the bottom, you are pulling fluid down and fighting the air that wants to go up. And because those lines run horizontal along side the frame, it makes it even worse.

@shannonstiles9838 Год назад

Hell ya 🇺🇸

@sketchychoppersociety2448 7 лет назад

Any codes that will need to be removed after? with dealer tool?

@HillCountryCustomCycles 7 лет назад

+Bar Stool Phreak We apologize for the late reply, but there shouldn't be any codes that need to be removed after this process.

@duanesifuentes4129 2 года назад

The dealership is telling me on my 2021 bike needs to be bled by a computer, is that true?

@heybruh3274 2 года назад

Really? He states right at the beginning what the deal is. I changed and bled my ABS brakes per these instructions and it worked perfectly. If you don't feel confident, then by all means pay the dealership to do it for you. Ride Safe.

@lorinlewis23 2 года назад

@@heybruh3274 what year bike did you do it on?

@aospwill Год назад

I had to take my 2021 rdrs bike to dealer. I think it has something to do with the linked braking, but not 100% sure.