Hey man, loving the channel. Am about to embark on a YJ build. Already have front and rear Dana 60’s, have already gotten a bunch of useful information from your channel and I’m sure will be a great resource as I progress through the build. Keep posting brother!
Awesome brotha glad it’s helpful! Good luck on your build! I’ll definitely keep posting I’m wrapping up the front 3 links now and be starting on the brake system videos next.
@@KBWheelin that’s what I’m gonna have to do also. Was just slightly worried how integral it would be with the shock towers putting stress right in that area. But in order to not have to notch it my belly height would be like 26”. Like you said in one of your videos it’s a lot of give and take. How’s the anti squat on your setup?
@ccasson19 I’ve done it a few different ways on different builds. I’ve removed it and put dom across farther back down the frame rails. I had one build I removed it completely but that one haded a rear bumper that was welded to the rails. I don’t remember what this build calculated out to on the anti squat I think it was 90 percent but don’t remember lol plus I raised the ride height and in with the clovers which effects it too but it performs great.
A lot of people like to use a degree finder tool at the mounting point on the axle. I do the math personally. I use a 4 link calculator and punch in all the mounting location measurement and length of the arms and it will calculate the triangulation.
@kadeluis8724 no it won’t be on the main page is will be in one of the tabs. It depends what calculator you are using but it will be called link triangulation
@kadeluis8724 I don’t but you can get one on busted knuckles website and there’s has it from what I remember. I did another video also breaking down how to do the math on triangulation as well
