Тёмный

How To Build A DIY Diesel Injector Pressure Tester WILL IT WORK? 

Matt's Shop
Подписаться 89 тыс.
Просмотров 24 тыс.
50% 1

Let's find out if we can build a DIY diesel fuel injector pop tester! We need to pressure test our Yanmar tractor diesel injectors to make sure they open at the proper pressure. This is the best way to tune a diesel engine. If your diesel tractor is running bad this will help! PARTS BELOW ↓↓↓↓
➤ Abandoned Yanmar Tractor WILL IT START? Part 1?: • Abandoned Yanmar Tract...
Timestamps:
0:00 Intro
0:38 Parts Needed
1:17 Building Pressure Tester
2:57 Injector Resurfacing
4:15 Pressure Testing Injectors
4:59 Lessons Learned & Outro
Parts:
● Welders: amzn.to/3twpOZE
● Bottle Jack: amzn.to/3qvwdSK (Same in video)
● Pressure Gauge: amzn.to/3IuyNil (Same in video)
Tools & Supplies:
● Tap and Die Set: amzn.to/3iCal46
● 1" Pipe Tap: amzn.to/3NjnA7V
● 1.25" Pipe Tap: amzn.to/36pstvh
● Teflon Tape: amzn.to/36HrgiI
● Sand Paper: amzn.to/3DesSNd
● J-B Weld: amzn.to/3DbpVgr
Fittings:
● Tee: amzn.to/3JCEThU
● Pipe: amzn.to/3IC8E15
● 3/4" Reducer Bushing: amzn.to/3D9s4ZP (I'd find a bigger one to screw in)
***All of the pipe fittings have to be hydraulic pressure rated. DON'T USE CAST PIPE FITTINGS. THEY WILL BURST!***
***High pressure diesel is DANGEROUS and can HURT you! Be careful and keep your eyes and hands away from the fittings and injector nozzle when performing these tests!***
These injectors open at 2275 PSI or 160 BAR.
This is a Yanmar YM2000B Diesel Tractor.
DISCLAIMER: Matt's Shop is not responsible for personal injury or property damage resulting from attempting to recreate the actions shown in this video. High pressure liquids are dangerous and can cause injection injuries.
As an Amazon Associate I earn from qualifying purchases.
#diesel #dieselengine #automotive #yanmar #mechanic #injectors #tractor #tractors #farm #farming

Авто/Мото

Опубликовано:

 

15 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 21   
@brngrofdeth
@brngrofdeth 2 года назад
Awesome idea Matt! Totally looking forward to the start up man! Love and blessings from Ontario Canada!
@byloyuripka9624
@byloyuripka9624 2 года назад
awesome, succint and efficient tranfer of knowledge here you are making the internet a better place
@MattsShop
@MattsShop Год назад
Glad you think so!
@kaluluwotataravaki9374
@kaluluwotataravaki9374 Год назад
Thanks man your idea help's me a lot 💯
@MattsShop
@MattsShop Год назад
Glad to hear it
@johnrouse6373
@johnrouse6373 6 месяцев назад
Very impressive and creative ideas and workmanship
@MattsShop
@MattsShop 6 месяцев назад
Thank you!
@matui6983
@matui6983 Год назад
I rebuild diesel injectors pretty much 24/7 and Ive got to say that without a doubt Yanmar bodies are the hardest to hold while lapping the sealing faces. One thing to be careful of with the Yanmar injectors is the thickness of the copper washers that go on each side of the return rail. Too thin and it allows the bolt to go down onto the adjusting shims bootin the injector pressure thru the roof in some cases. I machine an amount of rach bolt if they come with the injectors and always inform the installer to use thicker Dowty type washers or thick copper ones.
@MattsShop
@MattsShop Год назад
Thanks for the info. I will keep that in mind for the next Yanmar engine I work on. I see exactly what you're saying. That would throw off the PSI big time.
@davidlnorris
@davidlnorris Год назад
How much fuel should come out of the fuel lines before the injectors? I can get fuel to come out injectors. I have already made sure the needle valve moves freely
@jakedavis3743
@jakedavis3743 6 месяцев назад
Just to be clear are you adding diesel through the fill port in the back? Thanks
@MattsShop
@MattsShop 6 месяцев назад
Yes. I top off the jack cylinder with diesel through the fill hole in the back.
@jakedavis3743
@jakedavis3743 6 месяцев назад
@@MattsShop thanks!
@kubaSWAT
@kubaSWAT Год назад
You mean to tapp in the adapter which you welded in 2:16? Thanks
@MattsShop
@MattsShop Год назад
I would tap the top of the jack and not weld anything. The part with the nut on it that screws into the top of the bottle jack.
@kubaSWAT
@kubaSWAT Год назад
@@MattsShop Thanks for your answer, English is not my mother language so sometimes I miss something ;) I have and adapter 3/4" to 1/4" and i want to screw it in but You say to tap it?? dont get it
@surfreadjumpsleep
@surfreadjumpsleep Год назад
I need to make some shims. I'm in Hungary.. No idea where I can buy them but I can hire a machinist to make them. Do they need to be made of some certain type of metal?
@MrRacerhacker
@MrRacerhacker 2 месяца назад
not really, get some steel washers, can also use steel shims from gauges, can do it also with a small piece of plate steel as well just sand it down
@rl8673
@rl8673 2 года назад
Get a Tesla
Далее
Yanmar Diesel Engine Cylinder Head Rebuild
5:44
Просмотров 6 тыс.
Regular Season vs. PLAYOFFS part 2 #pavelbarber
00:14
Qarindoshga uylansang😂😂
01:01
Просмотров 644 тыс.
Diesel Fuel Injector Test
12:11
Просмотров 97 тыс.
How To Clean Your Dirty Or Clogged Fuel Injectors
17:22
Testing your Diesel Injectors
5:46
Просмотров 580 тыс.
Cara buat alat tes nozzle
11:00
Просмотров 134 тыс.