How to build a DIY electric powered fat bike with car tires start to finish

Подписаться 71 тыс.

Просмотров 9 млн

50% 1

In this video you see me building a DIY electric powered fat bike with car tires at home in my garage. The video contains the full build start to finish. I added chapters below to easily navigate through the video.
I am a Mercedes and AMG fan so the obvious choice was to use AMG wheels.
It is powered by 2 hoverboard motors coupled together and 2 48v lithium batteries.
It drives fairly well, however it is very heavy so you have to get used to it to take turns. Brakes are a little underpowered, better solution would be hydraulic disc brakes from a motorcycle.
Technical details:
Wheels: 8 x 20" with 225-35-20 tires
Motor: 2x 350w 36v from hoverboard
Batteries: 2x 48v 72000mAh Lithium pack
Controller: 2x 48v 350W GT-100
Weight: approximately 75 kg
Topspeed: 40 km/h
Chapters:
0:00 - intro
0:12 - building the frame
8:52 - building the motor
15:02 - building the battery tray
17:29 - spray painting
18:22 - brakes and electronics
20:01 - presentation of the finished project and testdrive
Leave your questions in the comments, I will be happy to answer them.
If you like this kind of builds consider subscribing so you don't miss the next project.
Thanks for watching!
Check out my other homebuilt electric projects here:
• DIY powerful electric ...
• Homemade powerful 2WD ...

Хобби

Опубликовано:

22 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,8 тыс.

@hennybutabi 2 года назад

Let me know what you think in the comments below :)

@sheanyquist 2 года назад

Yo, awesome build!!! Your getting me motivated. If you wanna cross promote, I can post your link on my diy ebike video (500k views). Just add my video link at the end of yours then let me know

@victoriacorner8444 2 года назад

Did you link the battery's in series while they still had their own original bms's? I'd love to know as I'm trying to build I high voltage battery without forkin out a fortune for an already built one.

@grandpalace999 2 года назад

Love it brother.I wish I could have your skill.

@user-yk4lq5ei3p 2 года назад

Awesome ❤️

@BITE_MECHANISM 2 года назад

What I think? You got drawings and parts list? This thing is amazing!!!!

@jaspergross6866 2 года назад

Like the design. I've ran 150k+ miles running car tires on my motorcycle. Front and rear. Never once had an issue turning.

@baldwilliams3199 2 года назад

It's funny how I watch these episodes of DIY builds and the whole time I'm thinking, I can build that. Knowing damn well, if you gave me all the parts laid out, I wouldn't be able to do it. Outstanding job on this bike. Very impressed.

@mikethatguy27 2 года назад

Your Honesty gets you this 👍 and 💯 Honesty on the internet is unseen these days! Lol 🙌✌

@powrepunch4938 2 года назад

If you really had all the materials and tools you would at least try to build it. Interesting thing would be how far you get. I think I would massive problems with electrics and all that wiring... I never really tried to understand though 😅

@marianonavalmoral4934 2 года назад

@@mikethatguy27 ñp9

@mikethatguy27 2 года назад

@@marianonavalmoral4934 ñp9 👍

@iamtheonlywilly 2 года назад

🤣🤣🤣

@user-mt3cg6qz4c 2 года назад

И ВСЕ СХЕМЫ И РАСЧЁТЫ ДЕРЖАТЬ В ОДНОЙ ГОЛОВЕ, БРАВО МАСТЕР 👍ОТЛИЧНАЯ РАБОТА,Я ТАК ПОНИМАЮ ЭТО ГЕЛЕНГВАГЕН 2Х КОЛЁСНЫЙ

@b.v.g.feddie8667 Год назад

I wouldn't consider this as a DIY project, due to your level of knowledge, experience, and amount of machinery, but definitely is a marvelous peice of machinery there.

@chrisgenovese8188 2 года назад

I made the surprised Pikachu face when I realized this monster was bolting two hub motors together. This was an awesome build!

@ofreflection 2 года назад

*Давно слежу за самоделками этого парня и он продолжает удивлять своими уникальными электромоделями)*

@dfgadasgag4396 2 года назад

Посмотрите канал robotodatel, там тоже по электротематике много чего интересного есть )

@user-pm9cq5oj7y 2 года назад

Скажу так цей Кулібін просто молоток👍👍👍

@small-china 2 года назад

выглядит круто, спору нет. но рулевая дрыщавая совсем. не для такой конструкции. долго не протянет

@LexMetaller 2 года назад

автомобильные колёса это худшее что можно поставить на одноколейник. захотелось выпендриться - хоть мотоциклетные бы поставил, безопаснее было бы!

@Cj_segr 2 года назад

Да это так, чисто ради понта, или запилить видос

@Highspeedfutzi 2 года назад

Oh boy I always wanted to know how to build a DIY electric powered fat bike with car tires! Thanks algorithm gods. 🙏

@donaldmartin7109 2 года назад

SO BEAUTIFUL TO SEE GREAT WORKMANSHIP. THIS IS THE FUTURE. THANK YOU FOR SHARING.

@BTDT74 2 года назад

it also looks like you need to be doing "Lawn videos" also. Your lawn is flawless! My hobby or passion I guess I should say is working on my lawn and trying to make it look nice. Always trying to reach the next level of beauty in the yard. Great job on the build!

@hennybutabi 2 года назад

Thanks man that means a lot, I do my best to keep it green and clean😏

@badsanta7356 2 года назад

Do you also yell "get off ma lawn" to people sometimes?

@alexk7572 2 года назад

very nice built! Just a tip: use motorcycle tires on those rims, it will ride a lot smoother(especially leaning over for steering).

@nothingsurprisesmeanymore 2 года назад

Can you get bike tyres that wide that aren't £300 each though?

@f4tboy99 2 года назад

Maybe it would simpler to use a small motorcycle and convert it !

@jerryrivera7704 2 года назад

If he puts motorcycle tires it beats the whole purpose u dickweed 👊👊

@Debbiebabe69 2 года назад

its a FAT bike, motorcycle tyres are not sufficient for a FAT bike. If you are not familiar with fat bikes, they have really wide tyres so they run well on beaches, snow, mud, etc.

@alexk7572 2 года назад

@@Debbiebabe69 have you seen the tires on the super73 or a phatfour? Both fatbikes, with tires similar like motorcyle variants 😉

@user-sd8ev8yi5t 11 месяцев назад

Корч классный. Респект. Руки откуда надо растут.

@MarioJhonny 2 года назад

Muito bom, perfect! Brasil MS

@joselourenco8540 2 года назад

Censsacional, espetacular, obra de arte!!

@olimabdanov 2 года назад

super very good i from uzbekiston

@adamt.3857 2 года назад

I love this project from start to finish, outstanding skill and craftsmanship!!!! I think I wanna have one , too💗💗💗💗

@comradedimka4857 2 года назад

отличная работа, смотрится велосипед просто супер

@fredgonsalves7407 2 года назад

A very skilful man with the right equipment and huge imagination. Awesome work.

@neilfranklin5644 2 года назад

To think the early car engineers begun just like this

@RUXSORFM_RADIOSI 2 года назад

Great idea. Thanks

2 года назад

Công việc xuất sắc trên chiếc xe đạp này. Rất ấn tượng👍👍👍👍👍👍👍

@waynegilchrist1596 2 года назад

Nice looking bike and kudos for the design. The only thing I can say, that may sound negative, but it's not meant to be, is that you should have made it a Softail with shocks on the rear and on the front forks. Hydraulic brakes might be a good addition to be able to handle all the extra weight as well. I think you did a great job, it's a great idea.

@terrellr25 2 года назад

Yeah, I was thinking the same. Shocks on the front and rear forks.

@1islam1 2 года назад

@@terrellr25 🔴 What Is Islam? 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him. More ....

@randyg.7940 2 года назад

@@1islam1 I may be Islamic but I still smoke the chronic

@RGIIIBOXING Год назад

Wow" every time I visit this build..I hear people spending this guy's money..and This guys vision on what he wanted to build.." I'm Building a Similar Bike " The Batteries for My Build Was $2100" It's obvious that the only way im going to save money on the back IN" IS TO BUILD THE E-BIKE MYSELF" I REMEMBER WHEN I WAS IN SCHOOL..AND I HEARD OF A CAR THAT WAS FAST" COOL LOOKING AND EXSPENSIVE" ( LAMBORGHINI )..ALOT OF PEOPLE SAID..IT WANT LAST.. NOBODY IS CRAZY ENOUGH TO BUY SOMETHING LIKE THAT...IF EVERY SINGLE PERSON IN THE WORLD THOUGHT LIKE THAT...WE WOULD STILL BE RIDING AROUND IN MODEL T CARS" LOL" THE 350 CHEVY" MAN WHAT A MOTOR" NOW WE GOT THE LS" 5.3..NOW WE HAD MECHANICAL FUEL PUMP" NOW WE GOT ELECTRIC FUEL PUMPS" THEY INCREASE GAS MILEAGE AND HP? I TOLD A GUY ONCE WHEN I WAS SITTING OUTSIDE HIS STORE WAITING TO GO IN..HE ASKED" WHY DO YOU COME SO EARLY" I GET OFF AT 7AM IN THE MORNING YOU DON'T OPEN UNTIL 9AM..I TOLD HIM" I SHOULD BE ABLE TO DRIVE UP TO A MACHINE OR A SYSTEM IN YOUR STORE TO GET A MOVIE 24/7..HE SAID" Naaaaah" This IS THE FUTURE.. VIDEO WAREHOUSE AND MOVIE DEPOT" THAT'S A TRUE STORY.. ALMOST 7YRS LATER... ( RED BOX )??

@RGIIIBOXING Год назад

My POINT IS THIS.. EVERY ONE WANTS TO TELL ANOTHER PERSON HOW HE SHOULD HAVE BUILT HIS OWN DESIGN..OR AS I LIKE TO TELL PEOPLE..WHO LOOK AT THINGS I BUILD" YOU WANT 2 SPEND MY MONEY ON MY PROJECTS" I DON'T THINK SO" ITS NOT THAT SOME OF THE THINGS I HEAR DOESN'T HELP" BUT IM NOT BUILDING YOUR IDEA..OR YOUR SCHETCH ON PAPER" YES" THINGS CAN BE IMPROVED..OVER TIME" WITH FAILURE COMES PROGESS"

@prostosergik 2 года назад

Amazing build! I was expecting you to put all electronics into the frame to make to disguise this bike EV nature though. There is so much space inside of that tubes!

@hennybutabi 2 года назад

I preferred to do that but unfortunately the controllers and batteries I wanted to use did not fit in the tubes

@prostosergik 2 года назад

@@hennybutabi have you thinking about custom batteries? I don't think hiding controllers can be a problem, they are pretty small already. Or the idea to hide all into the frame is out of you scope?

@zachm.3049 2 года назад

@@prostosergik Yes please! Frame battery build also came into my mind. Just hope it has enough space to fit enough Wh capacity

@PlayToDIY 2 года назад

It’s beautiful, thank you

@KASSOR0123 2 года назад

Saludos desde Argentina. Excelente. Muy bueno.

@ctvtyctvtyjd6023 2 года назад

Советую из стекловолокна сделать крыло на переднее и задние колесо-что бы в сырую погоду быть чистым и будет супер

@cerealkiller4248 2 года назад

These type of builds are going to be the future of us getting about. A comfortable cruiser capable of 30mph up a slight hill is all we need with a top speed of 40mph. I love this one 👍👍👍

@eugeneli1952 2 года назад

Four words...Masterpiece, five thumbs up👍👍👍👍👍. But it is an expert diy😂

@dens7117 2 года назад

Завораживающий процесс изготовления электробайка

@needparalegal 2 года назад

Thank you so much, I had been trying to figure out a way to rig a suspension like this for years!

@robbiemer8178 2 года назад

Very nice build! In the beginning of watching this, I would have thought that having the wheels facing opposite direction would have made the balance better, it looked like most of the weight was on the right side of the bike. But, it looks like that really isn't an issue. Definite fun to watch someone who knows what they are doing build something, thanks for sharing this!

@Fwaxsd 2 года назад

This what encourage every smart engineer to build real things, thanks lot for inspiring,electric bikes is there future 🔥

@jasonsardie8085 2 года назад

Absolutely brilliant!!

@MakeitExtremeShorts 2 года назад

Nice job dude! :)

@hennybutabi 2 года назад

This means a lot coming from you😏. I am following your work for years now and a huge fan of your channels👍👍

@welshdave5263 2 года назад

I wondered if I would see you here, I loved your fat bike, but now I have to try build this one instead.

@davoodehajiraj 2 года назад

It’s nice to see u watch and like what I do I love every single project of make it extreme

@dikhiananta8160 2 года назад

Saya penggemar anda berdua👍 good job. I'am from BALI🙏

@aissahanggraini5716 2 года назад

@@welshdave5263 xx dengan

@JoseTC 2 года назад

Extraordinario, me encanta ;)

@patrickrooney5130 Год назад

Only one word is required. Brilliant.

@juandizzle2574 2 года назад

Beautiful!!

@thzzzt 2 года назад

Probably not the apex of efficiency, but sure looks durable. You'll never have to worry about bending a rim.

@kolecersukamakmurbogor418 2 года назад

💓💓💓💓💓👍👍👍👍

@shantor100 2 года назад

Then again nothing electric is efficient

@geemy9675 2 года назад

@@shantor100 neither is your trolling 😉

@shantor100 2 года назад

@@geemy9675 😆😆😆

@jessehavok4181 2 года назад

That thing is cool. I wish I had the resources to build something like that, myself. I've made a tadpole trike out of square aluminum tubing, but it was all bolted together. I never trusted it to not break, so I never rode it. lol

@oomiodio 2 года назад

Awesome!

@walterlang4089 2 года назад

Respect!

@amaurysilva9712 2 года назад

Projeto INCRÍVEL! Porém o amigo aí, tem um SENAI em casa , um simples mortal com suas "ferramentinhas"faz não !!

@mikejones420 2 года назад

looks really good, I am guessing turns aren't too smooth because of the tires, lean angle, and roll radius; but then again it isn't meant for fast cornering, very nice job :)

@TTIYTE13 2 года назад

MAN THAT IS RIDICULOUS!!!!!!

@hayathayat1462 2 года назад

Bravo Turkey İzmir selâm 👍

@user-rk3js2cv1i 2 года назад

какие параметры получились??? вес, скорость, мощность(разгон), дальность хода ...

@user-fe1jc2yt9z 2 года назад

Это произведение инженерной мысли и индустриального дизайна , а не тачка для подвоза картопли на рынок на каждый день ... У парня мастерская , как колхозная МТС по оснащению , зачем заморачиваться за пробег на дохлых аккумуляторах . Если мало энергии , нарастит багажник , или приделает прицеп с полезной нагрузкой до 500 кг и мощными батареями на 1000 км ...

@CYV_COV 2 года назад

Step by step make a DIY electric powered fat bike with car tires is really amazing. You have brilliant ideas and a high level of art. Very inspiring. Thanks for sharing

@bobbyvarg1 2 года назад

Brilliant 👏 👏 👏

@Zeioth 2 года назад

I'm breathless. This is great engineering.

@joaobatistamachado6283 2 года назад

Espectacular, parabéns.

@odairjosebezerra5613 2 года назад

Muito bom seu trabalho 👏👏👏👏👏🇧🇷

@NesolitS 3 месяца назад

This is truly a futuristic work of art. My sincere admiration.

@CarsMods 2 года назад

projeto top, parabéns

@HermanMunster420 2 года назад

Are those brake discs enough to stop it? Seems like a set of motorcycle discs would be better for the weight of the frame and the size of the rims.

@ManishWayz 2 года назад

Amazing! This has to be the best electric bike build I have ever seen!

@user-qy4jx1bo4b 2 года назад

مبدع انا من العراق اتابعك عمل جيد جدا استمر 👍💜

@52memor 2 года назад

MAGNIFICENT !!!!!!!!!!

@Traderhood 2 года назад

That’s an excellent fun build. Great job. I was wondering what your thinking was on gearing. One of those 350W motors has slightly over 10 nM of torque. So with 2 of those motors you’ve got 20nM. Which is excellent for such an inexpensive and small motors. Were you aiming for more torque or more speed with your gear ratio? I would like to hear your thinking on gear ratios.

@hennybutabi 2 года назад

I just winged it and it turned out perfect😏. I had some other sprockets on hand but I did not need them.

@khaboom282 2 года назад

its amazing , it looks clean( I don't know if this is the right word of saying it ) and I'd like to know is how does it perform on steep hill

@mrbnoo6031 2 года назад

Your the best hope your new style bike make it to the market$$$$$$

@RadiantFreeEnergyResearch 6 месяцев назад

Beautiful work!

@skizzysmith1146 2 года назад

it looks great. Very well made. Question 1. How does it ride over bumps without suspension ? Q2. Top speed ? Q3. Range on a charge ? Q4. Total cost ? Thanks, a great video.

@sperez95814 2 года назад

Yeah I’m thinking it must be a really rough ride

@kehejeanjacques8534 2 года назад

yes i though the same think while reading the video , may be we can had a seat made whith suspension like with the oldies harleys davidson or bmw motorbike .

@powrepunch4938 2 года назад

@Rocky Thacker I don't think so. Try roll a tire and turn it left or right. You don't need that much force to do it. But it probably is more difficult than a steering a bike.

@rameshchadrapatel3448 2 года назад

Also need fender else will spoil your clothes while riding in water puddle.

@borisb5163 2 года назад

Try that again with 40kg pressed on.. Becomes harder. And for turning on a bike, you need to ride on the side of the tire. Riding on the center and turning is also possible, but only at speeds below 3km/h. So not feasible for bike riding.

@angeloc700 2 года назад

Very cool…but I can’t imagine those brakes are doing anything to stop quick…. But very cool!

@joenickel2371 Год назад

American ingenuity is all about more money than brains!

@hennybutabi Год назад

I am from Belgium actually😏

@shesymartinez526 Год назад

the type of bike i wish Id see in minecraft!!! Its amazing!!

@themeritmerit 2 года назад

Bravo 👏, c'est magnifique, elle manque de système lumineux

@user-dg7bc7mm3y 2 года назад

В карелии ночи белые а зимой не покатет если только механика да

@BillyComadreja 2 года назад

The project is excellent, the construction work is neat and beautifully finished. It would be important that its weight is less, so that the battery lasts more miles.

@BoomBoom-oh1wq 2 года назад

Awesome 👏

@ilariochiera8361 2 года назад

Never leave a man alone in the shop. You'll never know what he may come up with. Great job.

@hakannedjat 2 года назад

Excellent build! Love it! I would have liked to see internal wiring, and with the weight of those wheels I'm not sure those small disc brakes will be doing much.

@bjelliott2887 2 года назад

There's a reason why you never see him come to a stop. 🤣

@olsonspeed 2 года назад

Wheel diameter is about the same as a bicycle wheel, the brakes will work just as effectively.

@genephipps6421 2 года назад

@@olsonspeed he mentioned the weight not the diameter, and his point was not without merit because all of that rotational mass is essentially a big flywheel or energy storage system. That said, given enough stopping distance I am sure they will eventually get the bike stopped. Obviously they won't be as effective as they would on a regular bicycle tire.

@ActivityPhoto 2 года назад

@@olsonspeed Nope the rolling weight of the tires and wheels come into plat as well. Mechanical bike disc brakes may slow a bit would not want to depend on them to emergency stop that very heavy bike, Also the motor is seriously under powered for the size and weight of the bike., But I don't really think he built it ride.

@tomsbondars 2 года назад

Yeah I think it doesn't make sense to have car wheels/tyres... The extra weight and friction must kill the battery so fast.

@TERRYB0688 2 года назад

Henny, nice cool design, must weigh a ton lol, should put it up for offer, would be interesting to see how much it would go for, nice fabricating 👍👍👴🏻

@techbuild1996 2 года назад

So cool!

@kakadi7408 2 года назад

O cara tem que ser um gênio pra bolar uma maquina como essa ! Parabéns pela criatividade.

@HoloScope 2 года назад

You seem so prepared and like you know exactly how you're going to do the project. Do you make like sketches of the dimensions and stuff before you go ahead and do it? Even with sketches I'm sure I would mess up terribly.

@mihalym.6876 2 года назад

This kind of project can not be done without CAD software properly. Nearly impossible to achieve the necessary tolerances for the whole build, especially for the drive system.

@calholli 2 года назад

@@mihalym.6876 How silly. lol... You could easily make this without even having any plans... The only real tricky part would have been, at what height do you put your pedals--- but then you could just measure from the existing bike and get you in the ball park, easy... The rest is very simple... Stand up a tire, start at the hub and simply angle your piece so that it misses the tire---- the precise angle isn't important, just as long as it clears the tire..... The motor he used is an already existing system; and it's not even that important where you mount it, just as long as your chain is in line--- You can always adjust the length of your chain to match what you've built... I literally can't think of any reason to do this in CAD

@oscarjimenezgarrido7591 2 года назад

@@calholli The Wright brothers would've loved to have you around.

@jrobertson7352 2 года назад

@@calholli 1

@sickickmidou8012 2 года назад

@MrSorseone 2 года назад

wow looks amazing.. please tell me you replaced the manual cable disc brakes for some Hydraulic types..

@---tr9qg 2 года назад

impressive !!!

@anasharizi4041 2 года назад

Availability of equipment and ambition opens the doors of creativity

@bobbybanks7554 2 года назад

Fantastic vision job and accomplishment!!! I'm totally inspired and motivated to buy...Job well done man down to every meticulous detail. THE Power Of The Mind 🤠

@Nobody-Nowhere 2 года назад

I like how all of your designs have a clear design language, even though this is probably a horrible bike.. it has an unique look to it.

@rockcrusher4636 Год назад

Super nice as always, thank you for sharing. Cheers.

@jobspeedmms 11 месяцев назад

including this brilliant idea, bro, from ordinary bicycles to electric bicycles

@ioannischerouveim7239 2 года назад

All I have to say, this is an amazing build! My advice for such a heavy ebike 80-100 kilos is to upgrade to at least 10.000 - 15.000w motor with a good controller and big hydraulic brakes. Then you will have the fun of your life 🙂

@Rendraco79 2 года назад

exactly.

@grantadamson3478 2 года назад

Then put in a very good suspension seat post. Those tires will make for a very harsh ride and cornering will be a major issue.

@jerryrivera7704 2 года назад

It's a concept bike ..not for retail..u dickweed..👊👊

@Traderhood 2 года назад

Yeah, but cost of this bike was probably around $300.

@donsmith4111 2 года назад

Awesome build ! Great use of used wheels and tires. You are a true craftsman .

@djohnson9663 2 года назад

Genius!

@tonydalton6756 3 месяца назад

Excellent work. As a fellow engineer I think I would have put a tensioner in the drive train & used aluminium for the frame. I'm going to build my own electric trike one day (It's always one day 😅)

@stefanogizzler 2 года назад

This is a phenomenal build, a culmination of excellent design and fabrication skills, keep it up. If that's on offer I'd buy it, Really cool stuff, Tuned in from the UK Midlands.

@user-fs8lz9re2q 2 года назад

Trust one of a kind rolling down Oxford Circus or Hyde Park

@youarepredictable 2 года назад

Step 1: Acquire and stock a full tool and fabrication shop and learn and perfect skills of metal fabrication and welding.

@sdz6tre Год назад

super cool

@ViTmaster78 2 года назад

Молодец братишка, зауважал💪🏻👍🏻

@geraldobavana5248 2 года назад

Bonito trabalho, acredito que ficaria maravilho se for integrado amortecedores!

@loafandjug321 2 года назад

You could make $18 million profit If only 0.5% of your viewers bought a DIY kit to build this bike.

@masmainam4389 6 месяцев назад

Can you make more motor for it, and sell to us 😅

@tlee5620 Год назад

Wicked!

@mahdishalodi Месяц назад

this is the Best Bike 😄😄

@DerRitter90 2 года назад

It looks seriously. How long distance can this bike take with full charge without using the pedals?

@luisdacosta1541 2 года назад

Very good work...besides being visually appealing, it seems to be extremely practical. That's what design is for me, it's the product of aesthetics plus function... Congratulations and keep doing it I can't build the things I like so I live through your videos and others who can do things like that.there aren't many but there are some.

@Nck493 Год назад

Looks amazing!

@sheepdog1102 2 года назад

Looks great from the left side!

@randphong 2 года назад

Very nice bike! It looks great. I have the same on my 'to do' list. You can put a motor in the front wheel too, to make it 2X2 or AWD. Battery and controller can be mounted on the frame and overall it will balance the bike nicely. I took an old Schwinn Beach cruiser, installed a mid drive bafang and mounted the battery on the rear carrier. Found it a bit heavy at the back and when I added a front hub motor, it balanced the bike nicely. Also built an aluminium battery box and put that in the frame 'triangle'.