I didnt understand part “dont touch gyro”, can someone explain me what is that and why cant touch gyro? I buyed new stack and i dont know what is that and did i touched it..
I just bought a quad with mamba f405 mk2 mini, 1304 4000kv, 800mw vtx , runcam split hd. could anyone recommend for me the best battery I can use? thanks all
Soldering the vtx power to 9v Pin on Mamba might be not the best idea. I did it. Ran my tx805 on 800mW and the vtx stopped working after a while. It is safer to connect it directly to Battery voltage.
I also want to build with this mamba and the same vtx with yours but i still waiting for the other part. I plan to use samguk shu 2306 2300kv motor and tbs source one frame
nice build 👌👌. I have a r-xsr receiver which has an s-port (telemetry) do i put it in the tx3 pad? and where would the smart audio go? Thanks in advance.
Great video much appreciated as I'm building with this board what UART is the tx3 that you have the smart audio conected to? I'm having trouble getting it to work. Any help would be much appreciated.
did you have any trouble mounting the scews between the esc and the FC? i took them off soldered the corners and found it extremely hard to get them back on. had to remove solder and they still dont sit 100%
what problems did you have with the ribbon cable? just finished my build and the esc's do not seem to be working properly through blheli so I might be having the same issue
yeah lot of people in this hobby is so rich that they cash out for the best and expensive parts . for me this is a hobby so it has to intelligent spending, now i have f405 mk2 in all of my quads
i got everything to work, then after i flashed to a newer firmware and such, i get no last 2 beeps on startup. because of this i cant get motors to spin and no connection between Fc and ESc.
check ribbon cable , take a light and see the ports, may be a pin is bent. fix the pin and then connect ribbon cable, also check the fc by connecting to usb betaflight , if the board is readable then the board is fine . its usually the ribbon cable that has problems .
i fly 3 days a week and i fly at least 8 packs i will crash once or twice each day , as i try to push myself but i carry a portable fire extinguisher, never had to use it but i have seen sht going down in a matter of seconds . but i always want to fly better its just crashes and this is the pain of this hobby. and also the true freedom for me .
i have tried both and they both give my vtx power but the goggles wont connect to the vtx and they are definitely on the same frequency do you have any suggestions?
