Diatone Mamba Flight Stacks 👍

Подписаться 61 тыс.

Просмотров 28 тыс.

50% 1

The Diatone Mamba flight stacks for both larger quads and the micro quads are a great value. Fairly inexpensive and good quality for your custom drone build.
🏁Diatone MAMBA F4 Power Tower - bit.ly/2yGDQuQ
also at RaceDayQuads - bit.ly/2Tbxpbk
🏁Diatone MAMBA F4 Mini Power Tower - bit.ly/2yqqJOs
also at RaceDayQuads - bit.ly/2TcwMhY
📺See the Mamba Mini stack in action here - • MD#99 🚁Diatone GT-M2.5...
📺See the Mamba Full stack in action here - • Diatone 2018 GT-Tyrant...
💲Help support the channel for more videos like this
👉 / albertkim
💲 Banggood Coupons: toyho || toysho
►BG Flash Deals - bit.ly/2PveA1b
►Banggood App - bit.ly/2PvYUL2
▼ RC Gear
Jumper T12 Plus Transmitter - bit.ly/2yCGJfm
FrSky X-Lite Transmitter - bit.ly/2MxDxXn
Fatshark Dominator V3 Goggles - amzn.to/2eY6dhF
Menace Bandicoot Antenna - amzn.to/2wRURUs
Foxeer Lollipop Antenna - amzn.to/2wVP1kK
Foxeer Lollipop 2 Antenna - bit.ly/2LNDNW1
▼ Tools
Xiaomi Electric Screwdriver - bit.ly/2OBa9k3
Cloth Tape - amzn.to/2JpCx5U
Hakko Soldering Station - amzn.to/2Pn5J1v
Mini TS100 Portable Soldering Iron - bit.ly/2z3V05Y
63/37 Solder - amzn.to/2De9rsz
▼ My Favorite Micro Drones
KingKong ET115 v2 - bit.ly/2MxSKYh
EMAX Babyhawk-R PRO - bit.ly/2Mx3c2r
GEPRC Phoenix 2.5 - bit.ly/2N9xVb4
Diatone GT-M3 - bit.ly/2N6m9y2
▼ My Favorite 5-inch Drones
HGLRC Batman220 - bit.ly/2MAeqmZ
▼ Camera Gear
Sony RX100 Mark V - amzn.to/2xpZk0c
GoPro Hero Session 5 - amzn.to/2xpwBsj
Hawkeye Firefly 8S 4K - bit.ly/2Po2SVO
Hawkeye Firefly 8SE 4K - bit.ly/2PmYvdH
SJCam SJ7 Star 4K - goo.gl/BzWpii
RunCam2 - bit.ly/2PmDaBf
Mobius Mini - amzn.to/2PrDtv4
Samsung Galaxy Note 8 - amzn.to/2wTF4lW
▼ My Camera Drones
DJI Mavic Pro - amzn.to/2wTIzcg
▼ My FPV Camera Review Rig
• Micro Night FPV with O...
My video editor - amzn.to/1VJHWp7
My editing PC - amzn.to/2MhlR3g
👉s u b s c r i b e - bit.ly/2QH0OZt
💰 Latest sales and coupon codes
🐦 / albertkim
🎁s e c r e t g i v e a w a y s
/ marblekit
💰 d o n a t e
Donate via PayPal - paypal.me/marblekit
Bitcoin - 12Y5vysDMvgqX4Z7h7iRTsgwWoCNwv9MPs
Ethereum - 0xD8f3758678F3d93539F804e36811f0A04B0D047F
Litecoin - LcyGPS2f3NZxWU6BRkCJ5qdk1zV6jUCtn8
👉PLAYLISTS
FPV Camera Reviews - bit.ly/2Nb9WIh
Micro Drone Review - bit.ly/2O2FTOH
Frame Review - bit.ly/2O48KSU
Quadcopter Builds - bit.ly/2O55ypY
Tutorials - bit.ly/2NYJy01
Haul Time - bit.ly/2O2Hkwz
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
#AlbertKim #DiatoneMAMBA #FPVreview

Наука

Опубликовано:

9 ноя 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 135

@dronereviewman9580 5 лет назад

I think its really cool how it comes!!!! Tells you everything you need to know!!!!!! GREAT REVIEW ALBERT! 👍😀👍

@kelvinwolf225 5 лет назад

I've been looking at this board for a bit. Thanks alot Albert

@BigDFPV 5 лет назад

I just did three builds with this stack, a 2.5" & two 3", can't beat the price. All three came out great and fly great, very happy with these stacks.

@sconerin1 5 лет назад

not 1st ordered 30 by 30 easy build. always enjoy your vids .keep them coming Mr Kim :)

@Krashcan 5 лет назад

I LOVE THESE STACKS! I have built 3 quads now with them one is the mini stack, they work great are rock solid, mainly got one for a cheap build due to the low price but was so impressed I ordered more, one on a 6s 25 packs so far zero issues and the other 2 on 4s. Only downside is lack or uarts, but for me I don't need any more so I am happy. I had 2 JB F4 stacks die by the 3rd pack 2 of them! Yet these so called cheap ones way out perform and can take a beating. Highly recommend :)

@illpro2 5 лет назад

I love mine. Just installed it days ago and the thing flies better then anything that I have used before. Now we will see how long it lasts with multiple crashes.

@DaffyDubzFPV 5 лет назад

There is nothing better for the price, I love this stack. Got the 30x30 in my 5" and it's rippin hard, no noise, no issues. SBUS on RX1, SmartAudio on TX3, Telemetry on TX6 (This I had to use the un-inverted pad on my FrSky R-SXR because UART1 is the only one inverted on this FC) Can't speak for 6s, but on 4s the included LF cap is perfect, no noise.

@swugger 5 лет назад

Beginner question but do you see the mAh on your osd

@DaffyDubzFPV 5 лет назад

@@swugger yes there's a current sensor, however I could never get it to be 100% accurate, but I got used to it and knew when I got over 1600mah (on a 1500mah pack) that it was almost time to land. I've since turned it off because I go by voltage and how long I've been flying, you get used to it lol

@marianofpv 5 лет назад

I was about to buy it but I realised it only has 4 pwm outputs. I wanted to drive two servos for camera gimbal but is seems it's not possible.

@AreaKruzer 5 лет назад

Hi, can i know which pad is the RX1 pad on the mamba f405 stack? I can't seem to connect my frsky R-XSR

@roach969 5 лет назад

@@AreaKruzer RX1 is labeled "SBUS".

@rotatybo 5 лет назад

Thanks

@osheathedj 5 лет назад

Wow $40 is an amazing price. I was getting the emax 12a stack for most of my small projects, but these are 20a, F4 and CHEAPER. Nice.

@usarmyfl1 5 лет назад

Pretty neat, and I love the little box and packaging lol. Stuff just gets better and cheaper in this hobby.

@rogueFactor 5 лет назад

i love the product presentation as well!

@MCsCreations 5 лет назад

It remembers me the "Black Mamba". 🤔 But pretty nice! Looks great! 😃

@shenanigan3083 5 лет назад

I just picked up the 20×20 man those pads are so tight going to take a steady hand

@jamesgheffalump3692 5 лет назад

great stack,ive used them and so far so good. the price on them is slowly going up from 33 and change for the mini when i got em then 37 and now 39. still worth it tho. thanks Albert! =)

@flipcrash8537 5 лет назад

I have both of these but haven't installed either. Have a few builds lined up for them though so I am excited about using them.

@flipcrash8537 5 лет назад

@GHETTO BIRD FPV I haven't installed it yet but I am happy to help you sort out any issues you are having

@_roppie 5 лет назад

That slight disappointment when you say "pretty boring actually" :D

@yodayedi2325 5 лет назад

nice

@gameovr8266 5 лет назад

Bought 2 of those

@dkieng 5 лет назад

I just bought one of this and I wish it had one more extra UART for my GPS module. I mounted my Crossfire RX and TBS VTX with smart Audio using TX3 and there weren’t enough UART for the GPS.

@housinit 5 лет назад

Hey Albert, for the mini Mamba there is more documentation in the case under the foam that tells you what all the pads are. Took me a minute to find it when I got mine.

@AlbertKimTV 5 лет назад

I looked there... seems mine didn't have that 😪

@mece66 5 лет назад

@@AlbertKimTV are you quite sure? I mean I'm pretty sure I can see it lying on the table at 7:22 for example. It's a black (as opposed to the green blue swirl thing on the top paper) round paper with the mamba logo. The pin labeling is on the other side of that paper.

@NATGEOANDSTUFFPaulbrannan 5 лет назад

great stacks.cheap aswell.

@CapApollo 5 лет назад

they need to release the tbs vtx complete module... the same they use in the gt-m3 and others.

@rogueFactor 5 лет назад

oh my gosh i can finally rebuild my gt m2.5 and gt2 r90!

@hakancakirkan2319 5 лет назад

good price

@VineyardFPV 5 лет назад

Hi Albert, you may want to double check with BG before it hits the fan: I've ordered the Mini Stack and received the 30mm one. Yes, I saved a few $, but it's not nice planning for a 2'' build :-) Can FW the comms if helpful. My question if this is fixed now is without an answer since a week. Solid review as ususal, thanks

@AlbertKimTV 5 лет назад

I haven't heard this from anyone else but I have had a few orders sent with wrong items before. I think 3 total in about 1500 orders so the error rate is acceptable to me.

@isaaclyonsf1 5 лет назад

👍

@lustertone8587 5 лет назад

Do you have a width and length dimension on the F40 Full size ESC at the corners across each side?

@TeufelHunden 5 лет назад

Where do you solder the low esr capacitor?

@seahookfpv 3 года назад

For this mamba mk2 301 can you help me out we’re can find the rx1? Because it’s only tx1 is there

@quickf0x792 5 лет назад

You need to check out the new hyperlite stack that's around 10 usd more, but has better components; I just finished helping a friend build his quad, and I found that these escs are surprisingly good quality;The hyperlite stack has the f4 osd and a blheli_32 esc!!!

@sharkbytefpv4326 5 лет назад

I second this request!

@scooterpie1143 5 лет назад

Link please?

@shri7582 5 лет назад

pirofliprc.com/Pyrodrone-F4OSD-Typhoon-V12-Stack-Combo-PRE-ORDER_p_6069.html

@Stashmanfpv 4 года назад

You must be talking about the Emax F4 stack for $24.99 ? And the Emax 4 in 1 esc for $49.99 So, that's around $75 for both. A far cry more than $10 Can't beat this price either! So, I got 6 complete stacks as they're so inexpensive and I'm gonna build a few, keep a few, and give a few away to the kids at the field that can't afford a quad to fly.

@LegitimaMax 5 лет назад

First thing that happened was the negative pad lifted off the board while soldering on the esc. Pour design

@MikeLaRock88 5 лет назад

Same here. I wanted to remove my battery connector and the negative pad came off before the solder even started melting smh

@LegitimaMax 5 лет назад

@@MikeLaRock88 camera port just went out on FC. Had to bypass it now no OSD.😎

@BroccoliBrigardist 5 лет назад

@@LegitimaMax it does have osd yes?

@LegitimaMax 5 лет назад

@@BroccoliBrigardist it does , but if your ports go out like mine you have to bypass the FC and you lose your OSD

@DroneOn 5 лет назад

30 x 30 on the way for my latest build. High hopes for this.

@mattlimpus9300 5 лет назад

How did it go

@DroneOn 5 лет назад

@@mattlimpus9300 very well. I am flying it every weekend lately. Also I have been flying a build with the micro stack past few days. It's got some tiny pads but so far, so good.

@mattlimpus9300 5 лет назад

@@DroneOn ok cool im getting when i get my 1st drone

@-Cristian_12 5 лет назад

Can i connect my Flysky t6 with a ppm receiver or another receiver for that radio?

@Stashmanfpv 4 года назад

How do you have your current sensor set up? Values? In B.F. power settings... Thanks for the video Albert !

@AlbertKimTV 4 года назад

Just using the defaults that came on the FC.

@allennickles3970 5 лет назад

I have three 20x20 Mamba stacks and the 30x30 Mamba stack running 5s & 6s low KV motors on 5 inch...and so far pretty solid stacks ....Good prices for F4 stacks Be careful with the small pads on the 20x20 flight controller. ...pads are very easy to rip off...lol...😉..keep digging in the 20x20 container...they are better directions for the flight controller pads😉

@jrc6193 5 лет назад

what motors and props are you running on the 20x20 mamba? and how lost were you running that setup? i just want to get an idea of their reliability on 5in

@allennickles3970 5 лет назад

J The 20x20 stacks are on Mircros 2.5 Diatone GT. Changed the Leader3 to Mamba 20x20 stack And i built one 3 inch build on a XJB145 frame with Hyptrain RotorX 1407 4140kv motors on this Mamba 20x20 stack...My 5 inch is on the Mamba 30x30 Mamba stack running 5s & 6s on RDQ 2205 / 1800kv motors... Drone Mesh chanel tested the Mamba 20x20 stack on a 5 inch frame big motors 4s...check his chanel out? Not lost at all with these stacks just basic F4 Betaflight OSD stacks?

@jrc6193 5 лет назад

@@allennickles3970 - oh i see, thanks!

@snuffy3006able 5 лет назад

Hey Albert, have a mamba 20x20 stack and the osd puts v's all over the screen in my googles. Have 2 of them doing it. Just wondering if you heard of a problem? Turn osd off in beta flight and it goes away.

@samuelevinti 3 года назад

Great video as usual, could you give me an opinion on the build I’m planning? I want to use the mamba F405 mini mk2 30a stack with gep gr1404 3800 kv with hq 3x3x3 props on a 3” frame, approx final weight all in with lipo 183g. 4s lipo Thank you!

@samuelevinti 3 года назад

Or the gep 1204 are enough ?

@willywijaya7511 5 лет назад

anyone have an idea to remapping the motors? my esc3 pad has no signal..(from the socket or solder pad under). thanks

@gonebdg 5 лет назад

I had strange experience with mamba power tower FC and Caddx Ratel camera. The FPV feed on googles show B&W no matter what i've done it always show B&W (tested on HD3, EV100, VR007) except if i use EV800D googles. Eventhough EV800D FPV feed show the color, but the recording result (built in DVR) looks bad and without color. On my FC, when i check pin CAM vs pin GND on the Mamba power tower with multimeter (in buzzer mode) the buzzer make a sound seems like the both pins was connected ... I think this is odd and suspecting that this is the cause of the color failure on FPV feed. So i check also my FC Mamba Mini tower (I had Diatone R349 with Runcam micro swift 2) and do the same test and result is the same where the both pin make a sound on multimeter buzzer mode. However in R349 there is no color issue on FPV feed on the googles. Can you please check the pin CAM vs pin GND on the Mamba power tower with multimeter in buzzer mode ... is it make a sound ? (you can also check it in resistance/OHM mode) Thanks in advance ...

@grumps316 4 года назад

Albert what are the esc's? BL Heli S or 32?

@demonicfpv4310 5 лет назад

Can anyone tell me where to connect a crossfire micro receiver too? Can't find instructions anywhere. Thanks

@FPVMgunit13 5 лет назад

Question...on the f405 mini.... can I use the VCC pad to connect that to my 7-17v on my VTX??

@AlbertKimTV 5 лет назад

Yes, I believe so. Double check the voltage with the multimeter to make sure its really battery voltage and not something else.

@robertquantrill 5 лет назад

Looking at designing a frame around a mini mamba, can anyone tell me the minimum clearance for the stack out of the box? Thanks in advance?

@johnmcdonald751 3 года назад

HOLYBRO TEKKO32 F3 4IN1 ESC / diatone mamba f405 rlight controller how to wire them up plz ty

@sebastiansombra 5 лет назад

Did you try them already Albert? Do you think the 30x30 will be good for a 6s low kv build?

@AlbertKimTV 5 лет назад

Yes, see the 30x30 stack on 6S in this video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CGTpOt5c0GQ.html

@sebastiansombra 5 лет назад

Albert Kim, Great! I think I'll get one. Which 6 inch (or even 7 inch) budget frame would you recommend? Freestyle mainly.

@JC-zg2id 5 лет назад

Is the whole lifting of these pads still an issue for this stack?

@AlbertKimTV 5 лет назад

I've never lifted any pads but I also have a high quality soldering iron.

@sribashdas 4 года назад

you did not mention about powering to esc dood

@fpv10 5 лет назад

Mine burnedㅠㅠ

@mattlimpus9300 5 лет назад

How do i use xt60 on it???

@13J460 5 лет назад

What does the BEC mean? Would there be anything else I need to install before just hooking it up and running it?

@AlbertKimTV 5 лет назад

BEC is the voltage regulator. To install it you need to solder up the XT30 to the ESC along with the capacitor. Connect the wire harness up from the ESC to the FC. Solder up a receiver, camera, and vtx. Mount the stack to your frame with the included screws and spacers. Check for shorts and use a smoke stopper before plugging it in for the first time.

@13J460 5 лет назад

@@AlbertKimTV so the capacitor is the BEC?

@crb1crb239 5 лет назад

@@13J460 NO....B.E.C. is Battery Eliminator Circuit..........just a name for different voltage output which could be used for other components....like u supply one battery (3s=11V)to the board...then the board provides other variety of voltage outputs (like 5V/9v)so that u can run other components (like transmitter/camera/vtx) from that 5v or 9v ....so u can run every thin with just that one MAIN battery ....

@mamoshimamoshian9078 4 года назад

Help I have just finished my build but i dont know if i have to flash it or not or how? can you point me in the right direction please?

@AlbertKimTV 4 года назад

It comes with firmware on it already. Don't flash it. It seems that will only cause you more problems.

@haafpv5254 5 лет назад

Have you used this stack yet. I have 3 of them and cannot get the amperage to show the correct value. The betaflight values are factory set to 0. I copied the numbers from another quad but it maxes out at 55 amps. Any help?

@AlbertKimTV 5 лет назад

The current sensor is 60A max

@manuelsmeets9392 5 лет назад

Stack another current sensor on top of die other one. problem solved!

@audaxxx4202 5 лет назад

@@AlbertKimTV But it says in the documentation that the 30x30 current sensor is 169A and the 20x20 is 139A. I'm confused.

@haafpv5254 5 лет назад

@@AlbertKimTV I dont think thats true. I have the 30x30 stacks and right on the documentation it says the current sensor is 169 amps.

@nachoinaki4775 5 лет назад

hi there, mine cannot read amps, please can you share what values you entered?

@stevega1000 5 лет назад

Hey Kim I wonder if you can help me? I purchased both the Mamba stacks and have mounted the full size stack and flew with it no probs. I have plugged the mini stack into betaflight and the accelerometer was greyed out and in the modes there is no angle or horizon. I have checked the usual suspects - accelerometer slider on. Pid giro set ok. Correct dshot etc. I am scratching my head now grrrrrrrrrrr HELP PLEASE

@AlbertKimTV 5 лет назад

ACC must be turned off in config. Just turn it back on.

@stevega1000 5 лет назад

Albert that was the first thing I tried. I made sure the slider was on. I am pulling my hair out as I have a nice Daitone Gt Rabbit stretch frame for it to go in. Looks like I have a broken FC damn :)

@zephyr2278 5 лет назад

I burned the ESC on this on an m540 on 6s, careful guys it may not be 6s ready even though the m540 is advertised as 6s

@loganphillips1569 5 лет назад

If we wanted to flash BF4.0 to this what target do we use? Thanks!

@AlbertKimTV 5 лет назад

FURYF4OSD

@loganphillips1569 5 лет назад

Thanks! You rock!!

@moparme2733 5 лет назад

Not flashable ???

@illpro2 5 лет назад

I'm curious how to get Current from the ESC to the FC. Not much to go by.

@rogueFactor 5 лет назад

ESC powers FC... this is common setup as the power for FC is via the wire harness.

@haafpv5254 5 лет назад

I am with you. It wont read the amp draw. I saw where it can be congigured in betaflight and copied a value from another quad. Still only reads up to 55 amps and maxes out. Help Albert

@feliciano1358 5 лет назад

What would you flash this as?

@AlbertKimTV 5 лет назад

the target is FURY4OSD

@nickcook8592 5 лет назад

What are the scl and sda pads for?

@AlbertKimTV 5 лет назад

Usually for a compass but could also be used for some other sensors.

@benherr2736 4 года назад

Albert. Can you tell me how to unlock a Mamba TX400 VTX ? I have a Diatone Taycan. Thanks in advance. Ben herr

@AlbertKimTV 4 года назад

Here's the PDF manual link - bit.ly/2z6qZ8x

@benherr2736 4 года назад

@@AlbertKimTV Thanks Albert, one question power up B-4 pushing buttons or after??

@xiandan54 5 лет назад

How is it running 6s?

@AlbertKimTV 5 лет назад

check out my videos on the GT-Tyrant. Running this stack on 6S just fine.

@brianbryan6636 5 лет назад

Which way is the front for the 25amp esc and fc

@AlbertKimTV 5 лет назад

Power plug goes out the back

@brianbryan6636 5 лет назад

Thanks :)

@dynamicfpv 4 года назад

Hi Albert. I saw your video and went out to buy one for my 5". I got it all wired up, but I'm terrified to power it because this is the 2nd time I built this thing. The first time something burned up. Is there anyway to have it inspected? I want to get this thing flying so bad (my first 5") I just can't afford to mess it up, my wife will kill me. Can you help me out at least point me in the right direction please?

@AlbertKimTV 4 года назад

Use a smoke stopper like this - bit.ly/2Zyj680 Also, you can use a multimeter to check for shorts in your system.

@dynamicfpv 4 года назад

@@AlbertKimTV I have a smoke stopper handy. I wired all but the camera. Ok, so let me just say that this is the 2nd time that I've attempted to build a 5". The first time didn't go well and stuff fried. Can you tell me if I have it wired up correctly? I can't afford to fry it. I really need some help. I have been trying to get this thing in the air for over a year and this is my 2nd big crack at it. I would really appreciate any help you can give me. I really just want to finally get this thing in the air.