How to Build a Paver Patio [Like a PRO] Start to Finish 

On my barn we have a covered porch that gets used quite a bit. To expand that area for storage and grilling we decided to build a paver patio. To do so we started by digging out the soil about 8 inches below grade. We then compacted 1-2 inches of clear 3/4 inch gravel base to fill any low spots. After covering that with commercial landscape fabric, we compacted another 2-3 inches of that same 3/4" clear gavel for drainage. After getting that leveled and pitched correctly we laid some 3/4 inch steel pipes for guides and added 1 inch of 3/8 inch clear chip stone and screed it even with the pipes. With a good base in place the pavers got installed and edged with paver edging. Finally poly sand was used to fill the joints and lock all the pavers in place. We also added a small privacy fence to hide an AC unit.
Pavers: unilock.com/product/brussels-...
Inside Color: Limestone
Soldier Course: Dark Charcoal
Polybind Sand: polybind.com/jointing-materia...
SST EZ-Spike: homedepot.sjv.io/KjqQLn
SST Connector Screws (Black): homedepot.sjv.io/Gm0LJk
Pit Boss Grills: pitbossgrills.77jaha.net/nL2OY9
0:00 Layout & Excavation
0:52 3/4" Clear Gravel Base
2:00 3/8" Chip Stone Base
3:06 Installing Pavers
3:51 Cutting the Curve
4:30 Paver Edging
4:57 Backfill
5:27 Polymeric Sand
6:30 Privacy Fence
7:20 Outro
-------------------------------------------------
SUPPORT ROGUE ENGINEER
Buy a shirt: bit.ly/rogueSHOP
Shop on Amazon: bit.ly/rogueAMZN
Shop at HomeDepot: bit.ly/rogueHD
-------------------------------------------------
BE SOCIAL
/ rogueengineer
/ rogue_engineer
/ rogue_engineer

Хобби