How To Build An Acoustic Guitar Episode 32 (Radiusing and Gluing On The Fretboard)

Подписаться 79 тыс.

Просмотров 17 тыс.

50% 1

Check out our newest product we're selling, the Bench Caddie!
www.driftwoodguitars.com/prod...
Check out our friends at Skycraper Guitars!
skyscraperguitars.com/
Tools used in this video:
Guitar Repair Vise: stewmac.sjv.io/y2qmeG
Radius Router Bit: www.precisionbits.com/6-piece...
4mm Allen Nut Hot Rod Truss Rod: stewmac.sjv.io/Gj3J32
StewMac Guitar Shop Tape Deck: stewmac.sjv.io/mgVarM
We have our electric guitars, The Tidalcaster, for sale on our website! Go check them out at: driftwoodguitars.com/electrics
Interested in finding wood for your next guitar build? Visit the tonewood section of our website for a wide selection of high quality, hand selected woods for luthiers of all abilities: driftwoodguitars.com/tonewood
Like our content and want to help us make more? Consider supporting us on Patreon: / driftwoodguitars
Here are some of our favorite tools around our shop!
Stewmac Tape Dispenser: stewmac.sjv.io/mgVarM
Stewmac Conductive Copper Tape: stewmac.sjv.io/P0Dm2Y
Stewmac Super Glue: stewmac.sjv.io/oeZGPO
D'Addario Bulk Acoustic Strings: stewmac.sjv.io/e4WkOj
D'Addario Bulk Electric Strings: stewmac.sjv.io/a1XrBZ
Stewmac 2 in 1 Straightedges: stewmac.sjv.io/JrNRga
Stewmac String Action Gauge: stewmac.sjv.io/gbEavB
Stewmac Pattern Makers Vice: stewmac.sjv.io/mgVa2e
JessEm Router Lift: amzn.to/3wa6Tor
Fosi Audio Receiver: amzn.to/3A9zLOE
LED Overhead Shop Lights: amzn.to/3AyFz60
T-Track Railing Used on Island: amzn.to/3Cki29Z
Shop Refrigerator: amzn.to/3A8U1QE
Sure Shot Chemical Sprayer: amzn.to/3A8MO2O
LED Magnifying Lamp: amzn.to/3T2xOMu

Хобби

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@SkyscraperGuitars Год назад

Thank you for the kind words! It's so damn cool to see our tools out in the wild like this... I'm digging the combination of power tools and hand work you do to make your process repeatable... I'm also digging that fret caddie! I need to pick one up for the fretwork I've got coming up.

@DriftwoodGuitars Год назад

Oh man! Just shoot us a good address and we'll make sure one gets to you ;)

@danlsmock Год назад

I've been using a couple of toothpicks as index pins when gluing on the fretboard. I drill the holes in the fret slots after clamping it place with no glue making sure it is perfectly aligned. Just slot the toothpick after the glue dries and the fret easily covers the top of the toothpick. I've never had one shift when gluing.

@monday6524 Год назад

Thank you for the instructional quality and humor! I really do enjoy theses videos and always am learning.

@stevenkoppelkam643 Год назад

Miss you guys hopefully we can start seeing more of you all soon

@Theonlyshaun Год назад

Fantastic series! I so want to get itno this field.

@222222349 Год назад

Two years in a little nuts

@MalenyFieldsForever Год назад

I have to say that this series has inspired my own approach to building. 👍

@johnvcougar Год назад

As in ... take your time, no hurry, we got 3000 years? 😂

@scottriddle5468 Год назад

hey guys i cant wait till you put out a another video, you have the best content.

@eyeofamon Год назад

Saw these bits on Amazon last year. Passed because when you go to cut the second half, the bearing is not referencing on a flat surface, so it won't give the same cut as the first pass. Tried to pause the video to see if your results were perfectly symmetrical, but you didn't dwell on it long enough. Not to mention the potential for tearout.

@Darkcrimsonfall Год назад

Try cutting down "Lava me 3 Guitar" And see what's the inside of the Lava me 3 Guitar.

@scottakam Год назад

Thanks guys. I tried a 12" version of the radius bit and got some tear out. I did it before cutting the sides and didn't attach it to a large block though. Maybe, I'll try that next time.

@joeherrick3376 Год назад

I don’t believe there is the indexing issue that a couple of posters have suggested. The fretboard starts flat. The bearing is about ¼” wide. The router bit cutting blade stops short of the bearing. As long as the bearing is pretty close to centered, it will still be riding on the uncut fretboard surface when the piece is flipped over. You will end up with a slight “hump” along the fretboard centerline. Still a lot less sanding and an accurate starting point for the sanding process. I tried to make a drawing below: Fretboard ________________________________________________________________________________________ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - Bearing rides in center with cut portions above and below the dashed lines __________________________________________________________________________ Hope this makes sense?

@0whitestone Год назад

Awesome video, as always. Quick question: Is there a reason you don't use indexing pins to lock down the fretboard in place? I know that's a popular method of doing it. I've also heard that sawdust can work just as well as salt, and it might look better if any got the the edge.

$@fractalaudio4956$

@fractalaudio4956 11 месяцев назад

Excited for my great grandchildren to tell me how this one turns out. How's the "Woodstock" guitar coming along?

@user-ch9jo8mi7m Год назад

If you were doing a mother of Peral inlay, do you do the inlay after the radius or do you use a sanding beam? Where did you get your rachet clamps ?

@jakelindseymusic Год назад

Love the videos! I’ve learned a lot. I have a question. I’ve worked on guitars (pots, pickup swaps,etc…), built some necks, and done some refrets. An online person stated that I’m not a luthier. My question, when can you actually call yourself a luthier? Thank gents!

@chriswiddup Год назад

What are you guys on speed now? This pace is INSANE!!

@dobietoms1463 2 месяца назад

where did you get the alluminum samding radius piece you used as caul to clamp with

@johngriswold2213 Год назад

I tend to clamp the fingerboard dry, exactly in the right place, and then drill a 1/16" hole through the first fret slot on one side of the carbon rod reinforcement and around the 12th fret slot on the other side. I then cut the heads off two 1/16" brads and tap them lightly into the predrilled holes. These make removable, foolproof (me) index pins to keep the fretboard from sliding around on glueup. I do have to drill complementary holes in my clamping cauls. The pins pull out easy after unclamping, you could always rub wax on them if you are nervous. On a mean girl note, has building this guitar turned your hair gray? ;)

@davidedwards7172 Год назад

That glue application should be filed under oddly satisfying

@jimmydevine4862 Год назад

You guys got me off my butt and I started building after years of thinking about it. Starting with an electric of course. About sanding the binding, I wonder how a spindle sander would work?

@buschovski1 Год назад

Hey man, they got me off mine too. And this is just painting a Strat. (these are finishing videos they did at Stewmac)Ive really liked it. You feel like youre there with them and they care about what youre doing

@chadandrews98 4 месяца назад

When you sand the radius then it seems that the fret slot becomes more shallow at the edges. Is this a problem?

@larrycoon3794 Год назад

Chris, do you see value in the systems that use index pins for positioning the fretboard for gluing, like the one from Elevate? Would an amateur like me benefit?

@CastlebayNet_Music Год назад

I always use indexing pins. I take wire brads and drive them into the neck, leaving them a bit proud. Cutting them off with a pair of diagonal cutters will leave a sharp point a couple of mm above the surface of the neck. Position the fretboard where you want it and give it a tap over the pins with a soft mallet. Double-check to make sure the pins put the fingerboard where you want it. If things moved when you swatted the fingerboard you can pull out the offending brad and redo in a new location. Apply glue and then slide the fingerboard around until it drops over your pins. Clamp up and you're done.

@ryanfitzpatrick6687 Год назад

Really curious how you get that router bit to cut the same heights on both passes - seems like the bearing would be referencing an already cut surface when you do the second side…

@kenwhisler 10 месяцев назад

I use 1/16” drill bits as locating pins at the 1st and 12th frets. Nothing moves.

@encryptor6710 Месяц назад

What speed are you running that bit at?

@JustinLCecil Год назад

The closer we get to Andrew Jackson hair, the closer we get to a completed 3000 year old guitar

@neilpeterson5849 Год назад

I'm not seeing a link to that router bit. That is a great idea and I'd like to get one!

@neilpeterson5849 Год назад

Never mind, I found them online!😀

@colinowenuk Год назад

How many guitars do you make in a year?

@jimmaxwell5242 Год назад

So this will be a 3100 year old guitar by the time you are finished.

@aidantalbot9495 Год назад

surely you'd use registration pins

@harimengek4968 Год назад

Ketebalan kayu fingerbord berapa mister?

@brianfort5686 Год назад

Hi Chris…… a technical question? There’s a really high end traditional classical builder, I believe, in Michigan. No truss rod used but bolt on neck really surprised me. He puts a slight concave on the bottom side, (glue side), of his fretboards. He stresses the detail as being of critical importance. Have you heard of that ever? What is accomplished from doing so? Thanks

@gbish6906 Год назад

That is to set a bit of relief in the neck, since there is no truss rod to help with that, in that case. While the strings themselves will typically induce some relief, nylon strings on a classical have much less string tension than steel strings.

@few22772 Год назад

ผมเป็นคนไทย อายุ 25 ปี ผมชื่นชอบกีต้าร์มากๆ และอยากที่จะสร้างกีต้าร์ด้วยไม้ของประเทศของผม แต่เนื่องด้วยความรู้และความสามารถในการทำกีต้าร์นั้นไม่มีเลย จะไปเรียนก็แทบจะเป็นไปไม่ได้เพราะค่าใช้จ่ายสูง ผมอยากได้โอกาศเรียนมากๆแต่เนื่องด้วยภาษาและอะไรหลายๆอย่าง

@devinburrell8641 Год назад

One thing these videos have helped me realize is that I never, ever want to try to build a guitar.

@joepapa9912 Год назад

I know you guys have real jobs and real lives and all but where’s my content ha ha.

@jasmithcleaning Год назад

I use locating pins so that I don’t have to worry about it sliding around just my 2 cents

@Sammywhat Год назад

Hey! What happened to you guys? It's been more than two months and not a single word!! Hope you guys are okay. 🙏

@geamax1 Год назад

yooo

@TheAciddragon069 Год назад

am i the only one thinking Chris is looking more like Bob Vila by the day?

@BlugubriousMusic Год назад

You guys ok? Radio silence

@its_jvyn 10 месяцев назад

A 3000year guitar taking 3000 years to be built 😂 😂😂😂

@davidharris7431 Год назад

Yep , we're all gonna be 3000 years old .......Peace ✌

@sosugarplumfairy Год назад

are you alive?

@Lawson80 Год назад

GUYS! I enjoy your videos, I've been subbed for years; but please stop milking this guitar build, enough is enough. This guitar build series has been go on for over 2 years, and it's getting to the stage where it's not fun to watch any more. I know you guys are probably busy building guitars; but waiting a month to see 25mins of actual work on this guitar just isn't fun. Sorry for being negative; but I wanted to give you some honest feedback from a long time viewer, supporter and sub of your channel.

@waynejones6215 Год назад

Looks like a incense holder😂

@Overit5000 Год назад

Ok ok what kind of clamps are those 😂

@joeherrick3376 Год назад

They look orange in color which might mean Jorgensen? I found this on their site. They look a little different but seem to work the same? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6sotEqo7-S4.html

@yomommaahotoo264 Год назад

Yo - lemme axe you sumpmm. I'm considering a Guild D-55 (sitka with rosewood). Sweetwater offers choices in finished guitars by 'weight'. If one is 3- 4 ounces heavier than another, is that indicative of the sound quality?