How To build EPIC dirt bike wheels - step by step 🔥 (Insane start to finish transformation!!)

Подписаться 1,6 тыс.

Просмотров 6 тыс.

50% 1

How To build EPIC dirt bike wheels - step by step 🔥 (Insane start to finish transformation!!)
Today we'll be focusing on rebuilding your YZ125's wheels - from start to finish! We hope you learn something new & enjoy the transformation!
Enter to win this YZ125 build by visiting our website! 👉www.mxskillshack.com/
🕑CHAPTERS🕝
0:00 The destroyed YZ125 wheels that we started with!
3:30 Some insanely trick aftermarket parts for your Yamaha YZ125 build!
6:30 All the parts you'll need to completely rebuild a set of moto wheels
11:09 How to take your old crusty dirt bike wheels apart - sprocket & hardware
12:56 Removing brake rotors & hardware with an impact screwdriver AND a torch
17:17 How to remove hub bearings & seals with a seal puller & blind bearing puller
24:48 How to remove frozen spokes using a grinder or bolt cutters
28:18 How to smooth out, media blast & coat your dirt bike's OEM hubs (Cerakote)
44:24 Everything you need to rebuild your dirt bike wheels
47:25 How to install new All Balls hub bearings, seals & wheel spacers
59:23 How to prep, set "dish", & lace (install) new spokes into a dirt bike hub
1:05:18 Using a truing stand & technique to true your dirt bike wheels
1:13:27 Rim strips or duct tape?? What works better to protect your tube?
1:15:22 How to install a new rear sprocket & brake rotors (proper torque)
1:23:26 The factory way to install a dirt bike tube & Dunlop tire. Fast! (Baby powder & Windex!)
1:40:50 How to install Dunlop tire stickers (the rad yellow decals!)
1:47:02 You're done! It's time to enjoy your brand new dirt bike wheels!
Enter to win this YZ125 build by visiting our website! 👉www.mxskillshack.com/
THANK YOU all for supporting our efforts & bike builds here on RU-vid! We're going all-out for you.
🔥MX Skill Shack links:
Website: www.mxskillshack.com/
Instagram: / mx_skill_shack
RU-vid: • MXSkillShack.com | M.X...
🔥Fast Blast & Coat:
Website: fastblastandcoat.com/
Facebook: / 100063704523492
Instagram: / fbc_boise
🔥Dubya USA:
Website: www.dubyausa.com/
Facebook: / dubyausa
Instagram: / dubyausa
🔥All Balls Racing:
Website: www.allballsracing.com/
Facebook: / allballsracinginc
Instagram: / allballsracinggroup
RU-vid: / allballsracinggroup
🔥Bolt Motorcycle Hardware:
Website: boltmotorcyclehardware.com/
Facebook: / boltmotorcyclehardware
Instagram: / bolt_motorcycle_hardware
RU-vid: / boltmotorcyclehardware
🔥Dunlop Motorcycle Tires:
Website: www.dunlopmotorcycletires.com/
Facebook: / ridedunlop
Instagram: / ridedunlop
RU-vid: / dunloptireschannel
🔥Hinson Clutch Components Racing:
Website: hinsonracing.com/
Facebook: / hinsonracing
Instagram: / hinsonracing
🔥Works Connection:
Website: www.worksconnection.com/
Facebook: / worksconnection
Instagram: / worksconnection
RU-vid: / @worksconnectionusa
🔥HYGGE Performance:
Website: www.hyggeperformance.com/
Facebook: / hyggeperformance
Instagram: / reels
🔥Light Speed Carbon:
Website: www.lightspeedcarbon.com/
Facebook: / light-speed-carbon-100...
Instagram: lightspeed....
🔥Velocity Components:
Website: velocitycomponentsllc.com/
Facebook: / velocitycomponents
Instagram: / velocitycomponents
RU-vid: / @velocitycomponents
🔥Stuck Nutz:
Website: stuck-nutz.com/
Instagram: / stuck_nutz
🔥Maxima Racing Oils:
Website: maximausa.com/
Facebook: / maximaracingoils
Instagram: / maximausa
RU-vid: / @maximaracingoils8192
#YZ125 #TwoStroke #BikeBuild

Спорт

Опубликовано:

4 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@MXSkillShack Месяц назад

📌📌Drop a comment to win this week's Dunlop tire sticker giveaway! CONGRATS TO LAST WEEK'S COMMENT WINNERS - Mike, Albert & MotoRacerX22!! Don't forget to get entered to bring this epic 1997 YZ125 build home over at www.mxskillshack.com

@Bryski772 Месяц назад

Right on amigos those red wheels look sick. Can’t wait to see the completed build keep rocking 🤘🏼🤘🏼💪🏻💪🏻

@MXSkillShack Месяц назад

Massive, thank you, Mr. Price!

@mikehudg2209 Месяц назад

Hey guy's !! Absolutely love the wheel lacing demonstration - top notch work Uncle Tony 👍 what i like most about skill shack is Charles and Tony back up what they say with equal hands on work !!! Lots of knowledge on this channel, always looking forward to the next one 👍

@MXSkillShack Месяц назад

Hey Mike! Thanks for hanging with us buddy. Well we’re glad you have found the value in it. Many ways to skin a cat as they say. These techniques are something I learned through my career as a professional race mechanic / bike builder and have been game changers for me and how I build bikes or even maintain them. Tony // MXSS

@MXSkillShack Месяц назад

Congrats Mike! Your comment was chosen as a winning candidate! Make sure you go to www.mxskillshack.com and contact us through the “reach out” link at the bottom of the main page so we can get your details. Tony // MXSS

@GetAGripMx Месяц назад

Great videos fellas! I had no idea there was a tool for greasing the headset bearing. My favourite part of the video has to be the humour😂. It makes the videos what they are! Keep up the great work! I also learnt that there is a cir-clip in the cast hubs.

@MXSkillShack Месяц назад

Thanks for watching, this one is a beast of a video. Awesome comment too!

@MXSkillShack Месяц назад

Congrats! Your comment was chosen as one of our winners! Make sure you go to www.mxskillshack.com and contact us through the “reach out” link at the bottom of the main page so we can get your details. Tony // MXSS

@hunterowensby Месяц назад

Well I could talk about everything I learned about building beautiful wheels in detail but I turkey learned how much I like Tony’s nonstop dirty jokes 😂😂

@MXSkillShack Месяц назад

That’s Charles’s fault…. Glad you at least learned SOMETHING from myself. Focus already 😂. Also make sure you sign up at www.mxskillshack.com for your chance at winning the yz and everything else we’ll build. Whaaaattt! Now that’s dirty! Tony//MXSS

@coloradodirtbike5930 Месяц назад

You dudes are killing it Bros. How much longer you think until this bike will be finished and given away? I'm a subscribed member, dude I'm crossing my fingers to hope to when those dunlops.

@MXSkillShack Месяц назад

And we sure as hell appreciate you! No specific date yet. It’s been a bit of a struggle getting the shop up and running, and figuring out what the heck we are trying to do officially as a team (learning one another) But we are finding some serious momentum now. In the future we’ll have better clarity on questions like this, because things will become more streamlined for us and easier to present in a more professional manner (like mXrevival giveaways, with set start and end dates) In the meantime, we appreciate your patience and your support. It means the world to both of us. One thing is for certain, however. We will deliver! -Charles // MXSS

@DerekJamesLynn Месяц назад

Beautiful build guys absolutely stunning work, best to you guys from Texas

@MXSkillShack Месяц назад

VERY Much appreciated Derek! Thank you! If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information and the possibility of winning a bike once we complete them. Tony // MXSS

@albertking7012 Месяц назад

First, i just want to thank you for the Stuck Nutz! Second, you guyz are slayin this build, this is gonna be so sick and you two together are killin it! I have four tires to change and this is right on time. I'm a hands on guy so I've learned a lot here. Thanks for being so thorough and breakin it down for us laymen that's not done it before, badass! My bikes are of the vintage variety which i think you know already fellas, your techniques applies to my shxt too and you guyz are always my goto...final personal note, wife and little boy will be back from overseas next week after two and a half months so im ready for some stuck nuts believe me! Lol....can't wait til next week to check in the motor build. Have a great week fellas...

@MXSkillShack Месяц назад

No Albert, thank YOU!! We appreciate you greatly. We’re so happy to hear you are going to attempt this and use the techniques. That is awesome! You got this! Tony // MXSS

@jakesmith6460 Месяц назад

You have my respect, you guys are men of your word, calling me out for the baby elephant reference haha Once again, amazing video! I appreciate you guys' willingness to re-use the stock hubs and showing how to resurrect an old set of wheels vs just tossing them and replacing them completely. In addition to the cost savings you mentioned, it also helped me learn how they work, and how to properly maintain them to get the most life out of them too (and my tires and tubes), stock or aftermarket

@MXSkillShack Месяц назад

You know Jake, I’m not going to miss an opportunity for a baby elephant… It’s quite awesome you’re learning and seeing the value in what it is we’re doing. I’m not certain you have yet so I wanted to send a reminder. This VERY bike could end up in your garage. You just need to MAKE sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information and the possibility of winning a bike once we complete them. Tony // MXSS

@jakesmith6460 Месяц назад

@@MXSkillShack come on, man! You had me worried my subscription didn't go through properly haha. All should be good; I was able to get signed up a while back!

@MXSkillShack Месяц назад

WE appreciate the hell out of you Jake! Thank you 🙏🏽! Tony // MXSS

@MXSkillShack Месяц назад

Hey Jake. Congrats dude. We chose your comment as a winning candidate! Make sure you go to www.mxskillshack.com and contact us through the “reach out” link at the bottom of the main page so we can get your details. Tony // MXSS

@tylerjamesgillismusic4782 Месяц назад

Seals in laces out hahahahaha Finckel is I-horn, I-horn is Finckel! Finckel a MAN!!!! Nice work boys very sweet wheel build hope all is well.

@MXSkillShack Месяц назад

Hahahaha, but what about snowflake! Have you signed up yet Tyler?! Get with it if you haven’t - AH BOB SAGET! Tony // MXSS

@tylerjamesgillismusic4782 Месяц назад

@@MXSkillShack I just signed up for it Tony tell Chuck as well I’m sorry it too so long lol❤️😎

@MXSkillShack Месяц назад

So awesome Tyler!! We appreciate that greatly.

@MotoRacerx22 Месяц назад

The entertainment from watching the two of you guys showing useful skills on building bikes and just the crap you guys give each other is absolutely the best! You guys make it fun and enjoyable. You guys have helped so much on my 98 KX250 restoration! The Dunlop stickers would look great on my KX build!

@MXSkillShack Месяц назад

We appreciate that feedback! We enjoy doing this, but one of biggest takeaways is that folks are actually employing what they learned. That’s awesome! We’re just two dudes giving each other crap in a garage working on bikes. It’s rad!

@MXSkillShack Месяц назад

Hell yeah, dude! -Charles // MXSS

@RebelDev86 Месяц назад

i love the videos keep up the good work i can wait to see this bike done and i have raced dirt bikes is the past and watching you guys come together and build this old school bike to make it look new is awsome.

@MXSkillShack Месяц назад

Thank you for the kind words and feedback. We greatly appreciate your support. Ya know you should sign up at www.mxskillshack.com so it can end up in your garage and you could race some vintage races. Just a thought… Tony // MXSS

@MXSkillShack Месяц назад

Stoked to have you! Hope you win too! -Charles // MXSS

@rhycemaunders7555 Месяц назад

Just wanna say a big thanks to you too you’ve helped me out quite a lot watching these videos is so amazing how you can turn such a rundown bike to such an amazing bike. Keep up the work. 🔥💯

@MXSkillShack Месяц назад

We appreciate those words! Also very glad to hear you’ve learned something. We do enjoy bringing these turds back to life. If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information. Tony // MXSS

@MXSkillShack Месяц назад

Congrats! Your comment was chosen as one of the winners. Make sure you go to www.mxskillshack.com and contact us through the “reach out” link at the bottom of the main page so we can get your details. Tony // MXSS

@rhycemaunders7555 Месяц назад

Just done it, boys thank you so much

@joshbell2116 Месяц назад

You guys are awesome to watch. Always learning something. My list is probably too long to mention here. I'm truly a two smoker die hard (which is one of the things I love about your channel), but would yall consider working your magic on a 2001 Cannondale MX400?

@MXSkillShack Месяц назад

Thanks Josh! But really you’re the awesome one…. Glad to hear you’ve learned something. That’s the idea. I remember those cannondales and how they were a beast, but they seemed to always have mechanical issues at the nationals. I think Keith Johnson was one of the riders. Well we’ve got some ideas brewing about future bikes and utilizing one I’m quite fond of and know inside and out - ‘05-‘08 CRF450. If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information. Tony // MXSS

@Rick-ro8bf Месяц назад

you done good 😁 keep em coming!

@MXSkillShack Месяц назад

Thank you Rick! Check this out too if you haven’t. Make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information and the possibility of winning a bike once we complete them. Tony // MXSS

@stephenhardwick4358 Месяц назад

Great video. Keep it up

@MXSkillShack Месяц назад

Thank you! We appreciate you hanging with us. If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information and possibilities of winning one of our bikes! Tony // MXSS

@joelatkinson2080 Месяц назад

Awesome video!!! You guys are the best!!! So much great and useful information. Reminded me of my time changing tires at Cycle Tune in Fresno CA way back when. Thanks!!!

@MXSkillShack Месяц назад

Hey Joel! Thanks for the kind words. We appreciate you hanging with us. If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information. Tony // MXSS

@josephmillette1363 Месяц назад

Let’s go so glad to watch this while I’m working on the 5hundo

@MXSkillShack Месяц назад

Thanks for joining us, bro!

@PremixandPedals Месяц назад

In order for Uncle Tony to be a proper Vanna Brown, you need to put him in an evening gown!!!

@MXSkillShack Месяц назад

He was wearing the proper underwear at least

@MXSkillShack Месяц назад

Todd…. So let’s just say I had another batch of bad tacos. The beans get me every time. HELLAFIBER

@mmazz30 Месяц назад

Great episode as usual Charles and Uncle Tony. You're a natural in front of the camera, Charles......Uncle Tony has become the perfect partner. I've done a few tyres and rims but picked up a few good tips from Uncle Tony......work smarter, not harder applied here! How the f@#k you aren't getting more views when there are other sh1t shows with no idea is beyond me. Props to your sponsors again........ Fast Blast & Coat: Dubya USA: All Balls Racing: Bolt Motorcycle Hardware: Dunlop Motorcycle Tires: Hinson Clutch Components Racing: Works Connection: HYGGE Performance: Light Speed Carbon: Velocity Components: Stuck Nutz: Maxima Racing Oils:

@MXSkillShack Месяц назад

If it’s not our great Aussie brus! You my friend rule. Appreciate the kind words and you spending some of your time with us. You always know what’s up. Glad to hear you learned something from it. 22 years of moto knowledge to spread so I’m sure there’s something for everyone. It makes me happy to hear it helps someone out. If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information. Tony // MXSS

@mmazz30 Месяц назад

@@MXSkillShack I have been working on my own bikes for 48 years now...and counting. If I don't learn something new, I usually learn a better way of doing things from you Tony and also Charles. The added bonus is that you both make it FUN!

@bobbyblenio4571 Месяц назад

You both have a Beautiful Sickness with Building Bikes🦾🔥🏁

@MXSkillShack Месяц назад

The only prescription is MORE COWBELL!!!

@Sweendawg32 Месяц назад

Uncle Tony , have you ever ran into any issues with the wheels getting out of true or offset after pressing the tires onto the wheels ? Reason I ask is bc of the force against the spokes while your pressing down. Maybe I’m just overthinking it …. Looking forward to the next video boys!!!!💪

@MXSkillShack Месяц назад

Mike Honcho!! No sure I have not. It’s pretty stout once all is set and spoke tension is proper. Great question amigo! Tony // MXSS

@BeauFranklin Месяц назад

Great build guys. I’m building a 01 yz125. Any link to the rear brake line brackets? Thanks👍

@MXSkillShack Месяц назад

Thanks Beau! Check out the 3DP link below in video. Also if you haven’t be sure to sign up at MXSKILLSHACK to get into the running for this roach! Tony // MXSS

@BeauFranklin Месяц назад

@@MXSkillShack thank you. I’ll head over and get some👍 what clutch arm will you be using? You guys mentioned there was a road bike clutch arm? Just wondering what that’s off. Thanks again

@DSHoss Месяц назад

Kudos to you for wearing the hearing protection. This from a 53-year old guy who didn't (and should have).

@MXSkillShack Месяц назад

It’s a must! Sometimes we forget, but it is wicked important. Tony//MXSS

@donschoffer8986 Месяц назад

How much is the entry for this cr and where can I apply

@MXSkillShack Месяц назад

Hey Don. Our website is www.mxskillshack.com - these giveaways are a little bit different than the mXrevival giveaways. Same over the top level of quality, however. Thanks for asking!