How to Build High Tensile Fence - Part 5: Installing Wire and Insulators

Подписаться 4,8 тыс.

Просмотров 41 тыс.

50% 1

In Part 5 of “How to Build High Tensile Fence,” we demonstrate assembling a corner brace, paying out wire around bracing, and how to terminate at end posts. You’ll also learn how to position and load various insulator styles onto high tensile wire in the proper sequence.
Shop our selection of Wraparound Insulators here:
kencove.com/fence/Wraparound+...
Get the Spiralator insulators used in this video here:
kencove.com/fence/detail.php?...
______________
WARNING: Serious injury may occur by mishandling high tensile fencing accessories, and or mechanical post drivers. Head, hand, and eye protection should be worn at all times while working with high tensile fence wire and accessories. The individuals in this video are professionals with many years of experience in fence construction. They have been properly trained in the safe use of mechanical post drivers.
Make sure that you are fully trained in the operation of the mechanical post driver you will be using. You should also make yourself aware of the safe and proper use of all fencing tools and accessories before attempting to build a fence.
Kencove Farm Fence Supplies is not responsible for any injuries incurred while constructing a high tensile fence or driving fence post with a mechanical post driver of any type.

Хобби

Опубликовано:

19 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@zanebryant4168 2 года назад

Awsome job on the videos yall! Very informative with simple explanation. Have learned a whole lot from Kencove over the years.

@KencoveFarmFence 2 года назад

Thank you so much for watching!

@marcdipaolo5142 9 месяцев назад

Fantastic video!! I am thinking of the fences I've built and how much better they could have been. Whoops!

@KencoveFarmFence 8 месяцев назад

Thanks for watching!

@jamesabner6092 Год назад

Well Done Videos!!!! Liberty Township, Ohio, USA

@KencoveFarmFence Год назад

Thanks for watching!

@tymisrite Год назад

Thanks so much for this series of videos - going to be doing a tensile install here soon. Two questions; 1) Why do you start the wire around the corner instead of at the corner? 2) What do you do with any severe dips/change in elevations?

@KencoveFarmFence Год назад

Hi Matt, good questions. I'll try to answer thoroughly to cover all the bases of your questions. 1) We terminated around the end of the corner brace at the upper end (the end with a complete corner brace assembly) simply because of my future fence plans, normally the run would continue down the fence line, unless we were planning for a gate opening there. In most cases you will only be terminating at end posts where gate openings occur and wire would continue around all corners and bends. It is better to continue around corners than to terminate at a corner posts from both angles. In our case, the fence was not continuing downhill so we treated that corner assembly as an end post/gate opening. 2) Severe dips, rises, and elevation changes require bracing in those locations. High Tensile can do rolling topography well, but the more severe cases should be braced. Drive a post at the point of elevation change and then build an H brace on each side of it to support it in both directions. Please let us know if you have any further questions!

@orvenkelly 2 месяца назад

Thank you for the videos and fast shipment of my fence equipment. I have one question you have 6 strands 3 hot 3 ground. Where does the 3 ground wire connect to? I know the ground rods connect to the energizer and to each other. But where does the ground wires of the fence connect to? Thank you

@anthonydooley3616 2 года назад

Do I detect a little prior service military in your instruction? I like the proper nomenclature used throughout the video. Great job! Hooah!

@KencoveFarmFence 2 года назад

No sir, but thank you for the compliment!

@barryaddison4046 4 месяца назад

What wire spacing do you prefer and how many are hot?

@KencoveFarmFence 4 месяца назад

Wire spacing and configuration is truly dependent on your specific context and the species of animal. With five or six strand designs, usually two or three wires are electrified. There is no one-size-fits all answer, but we can give you solid recommendations for various species of livestock. Please give us a call at 1-800-536-2683 and we'd be happy to help you come up with the best configuration based on your needs!

@hoosierleakguy4565 Месяц назад

I have no idea if I run my wire around my whole pasture area or terminate at each corner for tensioning purposes? I have 5 braces total

@KnoxFamilyHomestead Месяц назад

Dumb question here but using an in-line tensioner still allows you to electrify the entire run?

@primozkumar3909 7 месяцев назад

Hi!❤ can i insatall ground stick about 100m from the fence?

@charliemeyer2710 Год назад

What are your recommendations for wire strainers? I've noticed there are heavy duty and standard wire strainers. Are the strainers used in your H-brace construction standard duty? And what applications would you need one versus the other?

@KencoveFarmFence Год назад

Hi Charlie, Heavy Duty vs Standard seems like some box-store brand strainers. For us, the two style strainers are Donalds or Hayes - and really the difference comes down to your preference. We are partial to the KIWI strainers, because they are made in the USA, hot-dip galvanized, and quality tested. For quicker and easier installation, the KIWI Quick End strainer is highly recommended. If you do prefer to crimp, we do have the standard KIWI Strainer. You can find both of those, and several other options, here: kencove.com/fence/Original%20KIWI%20Strainer_detail_SAS.php

@USPBrasil2011 Год назад

What kind of wire do you used for the strain posts?

@KencoveFarmFence Год назад

Hello - Are you referring to the H-Brace at the ends and corners? If so, we use the same wire as our line wire, MaxTen 12.5 ga. You can see that video here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xRzUXBau_50.html

@JoeHasGotToGo 2 года назад

That tool you use to start the U-nails, what is that called?

@KencoveFarmFence 2 года назад

That is the Kencove Staple Starter! They are also available for wide staples. You can find them here: kencove.com/fence/Staples_product.php

@Charliemmafan Год назад

Personally I don't really want to mess with putting those wires diagonal in your H brace so I would rather put maybe a 3rd vertical post with an N brace or have an N brace below your horizontal H brace between the same 2 vertical posts or something like that to avoid needing those wires.

@KencoveFarmFence Год назад

If the wires seem like too much of a hassle you might want to try a quick brace! kencove.com/fence/_detail_HQBS12.php See one in use in our video here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cbNM_C2oKS0.html