Тёмный

How to Build/Modify RTA Cabinets! Ep. 13 

Stud Pack
Подписаться 630 тыс.
Просмотров 209 тыс.
50% 1

Hey Gang. Today's video is pretty straight forward, we're building all of our RTA cabinets so that way when drywall goes up, we can throw these bad boys up and put them where we want immediately. Building cabinets is pretty relaxing, put some music or a podcast on, and get to building! Thanks for watching, we'll see ya in the next one!

Хобби

Опубликовано:

 

13 апр 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 475   
@StudPack
@StudPack 3 года назад
Hey gang, if you're looking for this brand of RTA cabinets, contact quavana.com to see if they can assist you. They are located in Houston and are our regional distributor. We order our cabinets from Triple Eight Stone in Baton Rouge (225-223-0855) on Airline Highway near Sherwood Forest. Thanks.
@echan275
@echan275 3 года назад
Hi Paul, first and foremost, thanks very much for sharing your skills and tips. I've been following you for months now. I called Quavana trying to see if I can buy RTA for my Dallas house. I was told I can only order from their catalog on their website, any custom stuff can not be done. Is this the same story with your Baton Rouge dealer Triple Eight Stone? Thanks much
@shinigamilee5915
@shinigamilee5915 3 года назад
Those aren't drywall screws, well, I hope they're not. Drywall screws are designed to snap off. They are not designed to handle weight as a fastener. I would swap them out if you suspect they are just drywall screws and use some stronger ones where they need to support weight.
@shinigamilee5915
@shinigamilee5915 3 года назад
I made the same mistake when I was younger. 😉
@mikeclarke3005
@mikeclarke3005 2 года назад
@@shinigamilee5915 using a temp fastener until glue dries, which is the primary fasting method would be fine.
@amoszook3775
@amoszook3775 2 года назад
THANK U.
@adriankoch964
@adriankoch964 3 года назад
You are probably aware of it, Mr Stud Pack, the videos you are creating here are gonna be a legacy not just for your Son, but also for many that grow up without a handy-able parent to teach them. Thank you.
@ckcuev
@ckcuev 3 года назад
You couldn't be more true.
@projectfreedom9510
@projectfreedom9510 3 года назад
yeah that's very true. Plus you and your dad have something many wish or had. That's what making these fun to watch along with learning.
@StudPack
@StudPack 3 года назад
Much appreciated Adrian thx 👍💪
@BrutalSalad
@BrutalSalad 3 года назад
If you have an interest find a company that will hire you. If you stick with it you will have many opportunities to learn and grow in the field.
@amoszook3775
@amoszook3775 2 года назад
EXACTLY
@lennywells51
@lennywells51 2 года назад
Yes guys it's Lenny in Prairieville. After the 2016 flood, I used these cabinets after the flood and I glued and screwed them with no issues!!! The guys at work were saying they spent 30K for cabinets!!! My insurance gave me 30K less than any contractor wanted ! So I used there and did my kitchen for $2800!!!! THEY ARE AWESOME!!! Great video as usual!!
@franciscovega7325
@franciscovega7325 3 года назад
Dad is a multi-task kind of Dad .. Camera Dad and Instructor Dad .. My Favorite part of every video is when Dad nods after he says "Lets get it done" ..
@btimbyindy
@btimbyindy 3 года назад
That is a great part, Dad's affirmative nod. Thanks for pointing that out.
@rico1319
@rico1319 3 года назад
Why are your videos so damn interesting? I think it’s because of the way you articulate with a friendly and professional attitude! OK let’s get her done! 👍👍👍😎🇨🇱
@btimbyindy
@btimbyindy 3 года назад
And Paul's knowledge, and Jordan's editing!
@StudPack
@StudPack 3 года назад
Thx Rico and Tim 👍
@jeffreylucas3421
@jeffreylucas3421 3 года назад
I just love his slower and controlled explanation of the build his experience and self-confidence really shows.
@StudPack
@StudPack 3 года назад
Thx Jeffrey 👍
@jeffreylucas3421
@jeffreylucas3421 3 года назад
@@StudPack Just fyi My old gramps use to work at Kolbs in the French Quarter may years ago. Who Dat.
@AJ-pc6tu
@AJ-pc6tu 2 года назад
Happy to see father and son working together. Thanks for the video.
@ronskeeters4319
@ronskeeters4319 2 года назад
It is one thing to be able to do the work, it is another to be able to teach others. You do an amazing job of instructing. Thank you for your time and effort!
@StudPack
@StudPack 2 года назад
Our pleasure Ron 👊💪
@eaglecanyonherefords2538
@eaglecanyonherefords2538 3 месяца назад
Thanks for making this video, 65 yrs old and I just learned how to use your finger to run a bead of glue along a edge - lol - I love it - love the whole video - hope RTA appreciates this
@gloryland59
@gloryland59 Год назад
I just assembled some RTA cabinets from overseas. . Very nice quality. . Better than most cabinets today. . I used a tube glue like loctite 3x, better glue and NO RUNNING. Dries overnight. If you have the say 3 drawer 36in. Cabinets, add flat support under the center of drawers for support.
@rsmith7292
@rsmith7292 3 года назад
I really admire your craftsmanship -- the way you check both sides of the drawer bottom to show the best side -- a detail many would overlook! Great video production -- nice edits, timing, transitions, and camera work!
@zephyr1408
@zephyr1408 3 года назад
Craftsmanship ? Did I miss the part where he built the cabinets? I know the part using a table saw, track saw, tape measure, a cut list, plan, design? I am a custom cabinet builder so I get a little tense when nice guys with nice sons kind of act like they are cabinet builders? By the way machined dove tails made on a huge machine where an employee feeds the board pushes a button and Bam u got half bling , or thru DT? The plywood is MDF fill that’s the dark streak! And never ever use Sheetrock screws on a cabinet ? Why ? Not acceptable won’t pass your inspection if caught ? No sheer strength! Sorry cheap knock off foreign cabinets that he is making a huge profit on ! Looks great ? I replace them and the cheap hinges all the time! A little misleading! Look back where he says “I like the tight fit” the camera slides to the other side briefly and there is a huge gap!
@tomwoods1725
@tomwoods1725 3 года назад
Nice seeing junior doing the work, chip off the old block 👌
@craigroberts9172
@craigroberts9172 Год назад
Except that he needs to show 100% respect. When his Dad tries to show him something, he tells him to 'focus on the camera'. He wouldn't have tried to correct him if he didn't think there was a problem. Also when the son tries to prove to commenters about his awesome screw gun talent, he bounces it off the cabinet twice, that could have been a disaster at a different time. These videos aren't to show how COOL you think you are. They are just educational and really good too. So respect your Dad and there is a difference between COCKINESS and CONFIDENCE
@htownblue11
@htownblue11 3 года назад
A Jordan Sighting! And he spoke! Hahahaha. Great stuff fellas.
@StudPack
@StudPack 3 года назад
Thanks 👍
@DizzyDan69
@DizzyDan69 3 года назад
Love watching your video’s and the quality of work you guys do. A tip in case you haven’t heard of before is to use a self centering drill bit on those plastic clips, that attach to the bottom front of drawer, to prevent the wood from splitting. That’s what we do at our cabinet shop. Keep up the good work. 👍👏
@RA1-1
@RA1-1 3 года назад
I like using cupcake/ muffin pans to hold all the screws and parts when I assemble things.
@jedwilliams6410
@jedwilliams6410 3 года назад
I bought the pans mechanics use that have a magnetic base. No metal pieces lost when I inevitably bump it and easy to store since the bottom will also stick to any metal surface like a fender washer screwed to the wall.
@toomanymarys7355
@toomanymarys7355 2 года назад
My dad does the same thing!
@mattwilliamson1714
@mattwilliamson1714 3 года назад
Great job! On cabinets with water pipe (under sink), I prefer to use a bead of clear silicone caulk (tub & tile) around all the inside joints of the finished bottom of the cabinets. (Then after I leave, any future leaks won't be able to get into the end grain and ruin the wood.) Also do it on every inside & outside joint if it's an area with a lot of bugs... the wood can't move if there's humidity changes, but it completely seals the cabinets from water, bugs, dust, etc. (Like to put Borax under all lowers too... making sure there's no good place for bugs to live.)
@StudPack
@StudPack 3 года назад
Good tips Matt thx! Jordan and I actually talked about sealing the interior seams 👍
@myopinion69420
@myopinion69420 2 года назад
This is exactly what I did when I did my kitchen. also used silicon to 'seal' the holes in the back and the cut-out for both the cooktop and sink (on a budget, so used a laminate benchtop) Also liked the idea of the cabinet under the sink being easier to clean, as I put in a pull out trash can under the sink. this way I don't have to worry about getting it to wet when cleaning it out.
@arizonaguy7574
@arizonaguy7574 2 года назад
It has gotten to the point when I come to one of your videos I automatically hit that like button because I know it will be educational, rational and entertaining.
@StacyForest738
@StacyForest738 5 месяцев назад
Even when I think I know how to do something, I watch your vids, because I always learn several tricks and tips. Thank you.
@ytSuns26
@ytSuns26 2 года назад
Some of the best cabinets I have ever used. I go ahead and glue and staple , using the included hardware as clamps while I assemble. Love them easy transport, fast assembly and strong.
@JasonJFlippingLife
@JasonJFlippingLife Год назад
Which company did you use?
@peanutbutterandjubilexsamm4375
This video is awesome, thank you for taking the time to detail out your process - it makes for an incredibly useful reference for those of us who are struggling DIYers. Awesome, sir!
@radiomantodd
@radiomantodd 3 года назад
Good call on those glide installs on the drawer. My home that I moved into had those screwed into the sides and not the bottom and they all (100% of drawers) had those screws fail (strip out/split) within 2 years of moving in. I reinstalled by screwing into the bottom and haven't had a problem since.
@Alex.smiffy
@Alex.smiffy 3 года назад
I need to shorten the depth on a cabinet in my tiny new utility room, thank you for this video!
@StudPack
@StudPack 3 года назад
Glad it was helpful!
@ianmelanson9520
@ianmelanson9520 7 месяцев назад
So grateful for this video! You're using the same cabinets with the same depth challenges. Thank you!
@rudispruell883
@rudispruell883 3 года назад
I like the grey electrical bushing protecting the ends of your clamp pipes.
@lorivezina7913
@lorivezina7913 2 года назад
Outstanding tutorial! You are giving me such confidence to “build the kitchen of my dreams !!
@thefabor
@thefabor 8 месяцев назад
Thanks so much for the great tutorial. The logical flow and precision of the vid is excellent. I noticed the 3" offset at the door opening. Many people would just put a 30" cabinet on a 30 or 31" wall. The offset makes a nice aesthetic. When I use a full overlay cabinet I usually put a 1" filler at the wall. It's not necessary but I Iike the look. There are so many times a standard depth cabinet just doesn't work. I've never seen the process, a big help for brave souls willing to do the mod. Thanks again. Excellent.
@bigneilh
@bigneilh 3 года назад
I LOVE my new Stud Pack Hat! My wife asked "What is a Stud Pack?" I said its a bunch of studs and an awesome father and son killing in NOLA!
@StudPack
@StudPack 3 года назад
Thx Neil 💪👍
@Thejrb11
@Thejrb11 2 года назад
You guys got me feeling so confident to build my kitchen. Ordered my rta cabinets today and will get started next month 🤙
@chris_favreau
@chris_favreau Год назад
So how'd it go?
@Thejrb11
@Thejrb11 Год назад
@@chris_favreau the kitchen turned out so nice. I ordered the frameless style cabinets. I wish I could post pics on RU-vid. I am about to start another kitchen this week on a new rental I bought.
@JasonJFlippingLife
@JasonJFlippingLife Год назад
​@@Thejrb11 Which company did you use for your rta cabinets?
@john.french
@john.french 3 года назад
Great to see Jordan working in this video! Helpful to see a different point of view. Full Send on that Like Button!!!
@therealdojj
@therealdojj 3 года назад
back inside again, those cabinets look very good quality so i'm going to come back at the end to see if i was correct... edited to add this: norm abram would be happy with your glue/brush technique and the "using your finger as a guide for the bead of glue" is brilliant
@StudPack
@StudPack 3 года назад
Love Norm, used to watch new Yankee Workshop every Sunday
@therealdojj
@therealdojj 3 года назад
​@@StudPack "Before we get started I'd like to take a moment to talk about shop safety..." Nice to see Jordan in the latest video making sure you had your hearing protection on :)
@ljay3030
@ljay3030 4 месяца назад
Nice job guys !! Thanks for the cabinet tips !!
@markdavidson7510
@markdavidson7510 Год назад
not only do you have good craftmanship on the cabinets....your making the video is awesome. good camera work and your 'announcer' voice is clear with just the right amount of information. I learned alot.
@nickbailey202
@nickbailey202 3 года назад
Jordan's doing a good job. It's a function of time though. Paul has the calm confidence that comes with decades of experience.
@paulcoolidge1140
@paulcoolidge1140 3 года назад
You should be using a drill with a clutch. The 12 volt Milwaukee 2402-20 is the best tool for the job for several reasons. The biggest of which is that the clutch setting and drill driver setting are independent of each other. Every other manufacturer has the clutch setting and drill setting on the same adjustment ring. With the Milwaukee, you set your clutch for the job and then you can switch between drill and driver without changing your clutch setting.
@donhartfield
@donhartfield 3 года назад
Yes. I've been using Milwaukee products for about 12 years after seeing the team who worked on my house use them. Very reliable and love the build-in clutch.
@return2basics242
@return2basics242 3 года назад
I LOVE this channel. They helped me figure out how to problem solve my kitchen faucet issue! 👏👏👏👏
@StudPack
@StudPack 3 года назад
The kitchen faucet idea worked out for you?? That's great, nice job 👍
@richb4099
@richb4099 3 года назад
I did 2 small kitchens with RTA cabinets I bought online and had truck delivery. They are decent and are Made in China......They had metal brackets to assemble. I added some glue and staples. They have no particle board and have held up well. I added soft close bumpers and one set has self close drawers. Not to bad to assemble. I did use cheap laminate counter tops from Home Depot. Overall I was happy with the finished product for the cost.
@abalmer
@abalmer 3 года назад
Rich B what brand did you use?
@skylerjohnson1827
@skylerjohnson1827 3 года назад
Great idea, I keep having to fix my drawers when they fall apart. I might go with RTA when I replace them so I can put them together right in the first place.
@paulbettencourt9657
@paulbettencourt9657 3 года назад
Not a bad cabinet! Nice to see plywood case but even better to see you use glue and extra screws to strengthen! 👍 nice job
@nicholasbausman999
@nicholasbausman999 2 года назад
I’ve been watching all your guys videos and I’m loving them…great channel…
@MyLifeDIY1
@MyLifeDIY1 3 года назад
This makes me want to do my own cabinets! Great video!!!
@Aepek
@Aepek 3 года назад
Love this series and the house looks amazing, Doing a great job on this remodel 👍🏻, can “see” everything and it beautifully done😁 Do like that the “quality” of materials have gotten better and not just mdf, or particle board for cabinets, which lets face it; it those kinda suck, and ever have a leak, those cabinets are toast. Nice to see dove tail joinery etc....on cabinets and actually “wood”, adds the “old time” handmade look/feel to a cabinet, imo. Nice job with these cabinets and nice SEEING you Jordan👍🏻 REALLY LIKE THAT COLOR, looks nice in that kitchen.
@StudPack
@StudPack 3 года назад
Thx Aepek!
@hassanbazzi3545
@hassanbazzi3545 11 месяцев назад
That was great work. Thank you for sharing
@brandondumas1405
@brandondumas1405 2 года назад
You are the only other person I've ever seen using a graph gear pencil. I've had mine for almost 6 years and it has never let me down!
@K27fan
@K27fan 3 года назад
I just bought RTA from RTA Wood Cabinets, based in NJ. The cabinets I ordered came out of Denver. I spent 41 yrs at UPS, these arrived packed in great shape on a pallet. The heaviest were on the bottom, there were corner guards and shrink wrapped super tight. They are solid wood, soft close doors, dove tails etc. I did a 10x10 foot kitchen for $3200 and that included shipping. The drawer bottoms are 3/8 thick ply, it will hold anything without breaking.
@Big_Kool
@Big_Kool 3 года назад
I’m looking at ordering from the same place,how did the assembly go?
@K27fan
@K27fan 3 года назад
@@Big_Kool They were super easy. No woodworking experience required. The side pieces have a dove tail cut on them, they just slide into the dove tailed groove on the back of the face frames. Everything else is drilled and cut for you. There are grooves (dadoes) cut for the backs etc. I used glue in the slots, and extra long screws other than what they provided. I also put 45 degree blocks in each corner to strengthen them. I also used 18 gauge finish nails, or you could clamp them after gluing. Either way you can literally build a cabinet in 20 minutes. The drawers are the easiest ever, super simple yet effective.
@psjr1
@psjr1 2 года назад
Do they have a name & web site?
@scotto40
@scotto40 3 года назад
Always nice to see you Jordan from out behind the camera.
@levelseven9841
@levelseven9841 3 года назад
You could argue that is was 3 setups on the table saw, because the dado. You always have great tips, and much knowledge. Love it. 👍
@StudPack
@StudPack 3 года назад
Thanks 👍
@borys444
@borys444 3 года назад
Got nothing but the upmost respect for u Jordan. Ur craftsmanship is improving and ur stepping up to the challenge. I have to admit I was one of those ppl that bust ur balls over doing stuff and then I thought to myself editing was solely ur thing and u weren’t as interested in doing the actual trades work itself. I’m glad to c I was wrong and I thoroughly enjoyed ur tutorial today. Keep up the good work brother man and I Appreciate the open mindedness that u give ur audience. Respect!!
@StudPack
@StudPack 3 года назад
Thanks for the kind words Nick! Truth is I do a lot of work off camera that isn't seen. But I've been building stuff for a long time. Used to build custom furniture in my own workshop in Dallas. We'll try to incorporate me more into these videos because people have been asking, but I've always wanted the focus to be on Dad. We can all learn from him.
@borys444
@borys444 3 года назад
@@StudPack I really appreciate u and I want to directly apologize for saying the 1 or 2 comments that I did Say in Previous videos (a few months back). Ur a good dude and don’t deserve the criticism. Thank u for replying back and I’m sorry for busting balls like I did. I look forward to watching u and ur dad grow in the u tube world. U guys r both amazing at what u do. Peace brother man!!
@danmccarthy206
@danmccarthy206 2 года назад
Nice work buddy. I'm using a similar RTA cabinet on a project and I can't get over how nice the finish is as well as the drawer construction and soft-close hardware. I got a complete set of cabinets, fillers, moldings, and panels for just under 5k! These will look as nice or better as a "fully built" cabinet once they are installed. I'm using RTA's on all my rehabs under $1M.
@themeat5053
@themeat5053 3 года назад
Compliments! You are a heck of a teacher and a meticulous craftsman. Plus, you are really good with your boy. I'm always too hard on my son when he works with us. I think I figure he should know through osmosis, because he's always been around. Maybe I should slow down and explain things to him better. Thanks for that example.
@StudPack
@StudPack 3 года назад
Thank you sir!
@suburbanhobbyist2752
@suburbanhobbyist2752 3 года назад
I just installed these EXACT cabinets in a remodeled kitchen. I bought them from RTA Cabinets and they are the same thing, even the same color, same brackets and hardware etc. The quality was better than I thought they would be. Kitchen looks great.
@abalmer
@abalmer 3 года назад
Can you post a link to the website?
@stevebabiak6997
@stevebabiak6997 3 года назад
The RTA supplier that I use is called KitchenSearch, they have a website with a number of different brands and styles. If you chat with anybody there, tell them I sent you.
@StudPack
@StudPack 3 года назад
Our cabinets came from quavana.com They're our regional distributor maybe they can assist?
@johnp4917
@johnp4917 10 месяцев назад
Any link? I don’t see a company with that name. There are 20 with similar names.
@eaglecanyonherefords2538
@eaglecanyonherefords2538 3 месяца назад
RTA cheapened things up a bit, no more pre-drilled corner brackets. And the kick plate, I haven't even figured out yet, mine are not long enough - wondering if its a mistake because there is no corner notch cut out either, and that is about how short they seem to be, but, idk. This is a great info video regardless, very well done.
@anneriordon4131
@anneriordon4131 3 года назад
You make it look effortless silky smooth
@StudPack
@StudPack 3 года назад
Thx Anne!
@poepflater
@poepflater 3 года назад
That is a good design with nice anti-sag shelves... The wife and I are renovating a small house we rent out that pretty much got destroyed by the last tenants, just decided today to just rip the cupboards out as what was left that didn't need attention wasn't worth $30. It is always less work just ripping crapping out rather than trying to clean and fix around it, isn't it. Also saw some premade stuff at local retailers... will investigate more after seeing this.
@MAC-ster
@MAC-ster 3 года назад
Really good stuff!
@Paftastic
@Paftastic 3 года назад
Great video. One step I do in addition to the instructions on RTA drawers is a bead of hot glue under the finished drawer bottom to stop the wiggle and rattle on the drawer bottom some designs have.
@StudPack
@StudPack 3 года назад
Good tip. Check out "space balls" for the same thing, never used them though
@pdavis2207
@pdavis2207 3 года назад
I glue mine with wood glue when building but have used the hot glue trick on cheap pre-built furniture and white boards. Always glue everything you can (backs too) for added strength and stability. This is especially true on cheap furniture.
@jessicahites871
@jessicahites871 Год назад
Those looked like some quality rta cabinets! I wasn't so lucky with the 20 I bought, built and installed. The screw holes didn't line up, the datos didn't line up, parts were missing, doors and sidewalls were missing. I had a heck of a time. Made it all work out in the end for the most part.
@alexoden8920
@alexoden8920 3 года назад
Great start to my day at work! Lol
@likearockcm
@likearockcm 3 года назад
No wonder I have problems .I've always used a mean pencil instead of a nice one ! Looks like fun building those, unlike putting together the cheap ones.
@plumbbuild6517
@plumbbuild6517 3 года назад
Nice Cabinets but I still like the cabinet builder I use he makes great cabinets and drops them off and I install them saves a lot of time and money, he makes and assembles them cheaper than I can, but it looks like you and your son has it going on great install 👍
@petewangen-groovedrummer8083
@petewangen-groovedrummer8083 2 года назад
THE best how-to show ever!
@RollinHomies
@RollinHomies 3 года назад
I also glue any furniture from IKEA or any RTA stuff. Good to see that I’m not alone in the overkill department 😉
@SeattleMK2GLI
@SeattleMK2GLI 3 года назад
This particular joinery is designed to be glued but I am with you on adding glue! A small bead of construction adhesive along the shear panel (back panel) on ikea/particle board furniture really adds a lot of rigidity!
@averyanders3728
@averyanders3728 Год назад
Fellas thank you for the video. I'm actually studying this post. I'm doing cabinets on the morning
@toodlican
@toodlican 3 года назад
Love the channel. I hit like on all these videos. I have a Red Seal in Canada but I just like watching your videos
@taxi317
@taxi317 3 года назад
Another top notch Stud Pack video.
@btimbyindy
@btimbyindy 3 года назад
Great video guys. Way to get your hands dirty Jordan!
@Ricardotism
@Ricardotism 3 года назад
Nice, I like how you modified that cabinet
@StudPack
@StudPack 3 года назад
Thanks!
@Jenbug123
@Jenbug123 2 года назад
Wow much nicer than my cabinets i just got. Didn't come with corner brackets. But At least now i can purchase some . they're not terrible but nice to see some nice RTA cabinets.
@garbelfunkle
@garbelfunkle 3 года назад
Paul: Use your finger like I showed you. Jordan: Do I have to? Sums up parenting in a nutshell. No you don't but Paul does it for a reason lol.
@olivertaylor4779
@olivertaylor4779 3 года назад
In the next video Jordan uses his finger as a guide, 'do it this way, Dad was right'.
@jesusrivera8136
@jesusrivera8136 Год назад
Excellent video! My installation was slightly different but you were a lot better than the instruction that came with it. Thank you Sir!!!
@texasfossilguy
@texasfossilguy 3 года назад
The only change I would make is instead of using the drywall screws go ahead and use stainless screws like Craig screws or one of the other stainless kind because they're way stronger. Especially for attaching face frames. If you use a number eight screw, I think that's what they are anyway, those are the best for face frames. Just need to hang them both level then screw together. Screw all bases together before installs. Usually like 2 in screws On uppers glue is sufficient, maybe 18 gauge nails also. For attaching to the walls, everyone should use stainless pan-head screws which are stout. They are probably simpson strong tie brand, star bit, 3" to 3.5" into the studs. Also there are shelf pin plunge bits at home depot or rockler for like 5 bucks to 20 bucks and it plunges to the set depth. Its got a spring on it.
@StudPack
@StudPack 3 года назад
Thx Tyler, good stuff!👍
@suemagruder4455
@suemagruder4455 Год назад
We just received a kitchen full of cabinets. GOOD VIDEO!
@ohhhsnap17
@ohhhsnap17 3 года назад
nice shot !
@IknowImNotCrazyYoumightbe
@IknowImNotCrazyYoumightbe 3 года назад
i do similar additional securing when building IKEA furniture
@mpmarvin999
@mpmarvin999 2 года назад
I’m getting ready to assemble some cabinets and this was just the video I was looking for. I wish I found this before I bought the cabinets because I would have did some cabinets modifying versus what I bought 18:56 that’s not what she said! 😂 I couldn’t resist
@Akanji1
@Akanji1 3 года назад
"Yes, this is-this is [Mr. Stud Pack]! You're in the right place. Thank you for that! I'm never dropping that, by the way." Great content as always. Thanks guys!
@StudPack
@StudPack 3 года назад
😂👍
@m3rdpwr
@m3rdpwr 2 года назад
I ordered some drawer fronts from Barker door I think they were located in Texas. They sell custom size drawers that you can order in a flat pack and assemble yourself to save on shipping sizes and cost.
@SpringRubber
@SpringRubber 3 года назад
Oh yeah, first pass when I glue is either too much...or too stingy. Dad has the right touch here.
@w-k-w6200
@w-k-w6200 2 года назад
Back in 2017 I rebuilt my kitchen after a water leak ruined the cheap particle board contractor cabinets around the sink. I used RTA cabinets from Lilly Ann Cabinets. They came from Asia and had the clips. I wish I had seen this video first... Like the Quavana, the Lilly Ann cabinets were made form nice plywood and solids and had dovetailed drawers. No more particle board sponge to get wet and mold.
@bobbittner7539
@bobbittner7539 3 года назад
I use a piece of pink styrofoam board to assembly my RTA's and if you get glue on it after it drys you can pop it right off. Great video
@StudPack
@StudPack 3 года назад
Cool tip thx Bob 👍
@YeethusCries
@YeethusCries 3 года назад
Awesome vid!
@cantdriveamotosaka
@cantdriveamotosaka 3 года назад
I can barely wait for the episode where you explain the sub-tops that your stone is going to sit on.
@StudPack
@StudPack 3 года назад
We did a video about them on a previous kitchen remodel, about a year ago
@DerrickFishes
@DerrickFishes 3 года назад
I use 23 gauge nails to hold the dovetails together instead of glue. Much faster and they never come apart. They also make little metal brackets with 2 screws that work great on some drawers. I can assemble and install a small to medium kitchen in a day or two with me and 1 or 2 guys
@StudPack
@StudPack 3 года назад
These dovetails were so tight I needed clamps to pull them together. Thx Derek 👍
@rodneyhammon1793
@rodneyhammon1793 2 года назад
You have such precision!…
@paulrooster2108
@paulrooster2108 2 года назад
My Ole Man passed just before I had turned 12 , He was a Commercial Fisherman by trade & whatever else came along after Season Passed . One thing he did was build mullet skiffs . He never once used a power tool it was all cut , bent/ formed , drilled , caulked , painted. I was the Fetch Boy . At most he only built 2 a year as other jobs popped up he would have to go to the one that put money in his pocket that week . I hated mending nets , after school an homework was done had to feed & water the assorted Critters being Chickens, Couple cows , 6-12 hogs , 20-30 Rabbits . He would auction off most of them an start all over again . Anyway after addressing the Animals man there would be several hundred feet of Nets to be repaired 😳. There were times I would have given anything for a Hamburger, Being unaware I was eating high priced groceries- 🤣
@LeeBuilt
@LeeBuilt 3 года назад
I've also had great luck with those cabinets. I glue and brad nail to hold.
@abalmer
@abalmer 3 года назад
Ryan Lee, what brand did you purchase?
@mahina1963
@mahina1963 3 года назад
I knew Paul's OCD would kick in...you could see him wanting to go hands on by his camera movement! so cute!
@pcrepairohio
@pcrepairohio 2 года назад
@ studpack I would recommend the Milwaukee M12 FUEL™ Installation Drill/Driver. The offset is nice for those tight corners
@daniel64padilla
@daniel64padilla 2 года назад
Hey guys, I sell these RTA all day and we do 100s at one time.. I wish we could get that involved and detailed with them, but we go as fast as we can with keeping a respectable outcome. You guys kick butt
@senorfrog1792
@senorfrog1792 Год назад
Do you sell Sauder Woodworking RTA FURNITURE ?
@lambition
@lambition 3 года назад
Most cabinet shops don't use any glue when they assemble those cabinets. Even with drawers, they just hammer dovetails together and use finish nail gun. This was true for all cabinet suppliers I have used in the past. It probably is not as good, but seems to hold just fine.
@StudPack
@StudPack 3 года назад
yeah the glue is definitely an upgrade 👍
@JoeyChlanda
@JoeyChlanda 3 года назад
Those cabinets are a trip! My local shop sells them the first order I assembled, second order it was $25/per cabinet to assemble it and I paid it. Took me over 2 hours to build one 3 drawer cabinet 😂 Forever mark was the brand of those. Almost the same instructions useless
@StudPack
@StudPack 3 года назад
Thx Joe, $50 per unit here
@JoeyChlanda
@JoeyChlanda 3 года назад
@@StudPack ahh that makes it worth it more to build yourself for sure! Keep up the good work I love your channel :)
@tonyoc2011
@tonyoc2011 2 года назад
Where are the cabinets from?
@suburbanhobbyist2752
@suburbanhobbyist2752 3 года назад
22:19 I have that saw too! It is the best freaking jobsite table saw I've ever used. Anyway, I'm sure you are aware, but it accepts dado blades as well.
@StudPack
@StudPack 3 года назад
Luv my sawstop ❤
@wade2361
@wade2361 3 года назад
Love the swish noise at 1:08
@alexcolgin739
@alexcolgin739 3 года назад
Really enjoy all the videos! These videos remind me so much of all the work me and my dad do together.. Once my stud pack gear comes in I’ll be ready to fly down and spend a few days working with y’all 😆
@StudPack
@StudPack 3 года назад
Cool Thx Alex 👊
@CARLOSTREUIL
@CARLOSTREUIL 2 года назад
If you are looking for a secure method of drilling holes for your shelving supports you might get a piece of scrap wood cut to the desired thickness so that it acts like a depth stop for the bit. Leave it on the bit as you drill each hole. No risk of blow through.
@amoszook3775
@amoszook3775 2 года назад
AMAZING!
@cloudydays1792
@cloudydays1792 3 года назад
Bout time the you guy doing the work!!
@Goodellsam
@Goodellsam 7 месяцев назад
I always hand the boxes, then install doors. It is just lighter. When I can, I attach a couple of cabinets together, then install on walls.
@chrisberry9016
@chrisberry9016 3 года назад
Awesome video. I know there are now guys out there who will not be afraid when they hear that the great price for the cabinets is because they have to assemble them their selves. Only one critique. When you put the drawer bottoms in, put at least a few little spots of glue in the Dados, just to keep the bottoms from rattling. Can't stand rattily drawers. Nice job Brother.
@hmg8915
@hmg8915 3 года назад
I bought rta cabinet for my kitchen Remodel and I was very happy with them, just make sure you buy quality rta cabinets and you can't go wrong for the money..
@abalmer
@abalmer 3 года назад
hm G where did you buy your RTAs?
@StudPack
@StudPack 3 года назад
these are from quavana.com
@1TexasKid
@1TexasKid 2 года назад
For Kitchen & Vanity sink cabinets, would you recommend caulking the bottom corners of the walls & base to force leaks to empty out the front of the cabinet. Water leaks are noticed too late. Damage has already occurred to the cabinets. I usually apply a self sticking clear plastic to the base to give it an additional layer of protection. I’m looking for your professional advice. Am I doing the correct thing to protect my sink cabinets? 🤔
Далее
How To Install PERFECT KITCHEN CABINETS (DIY GUIDE)
24:45
HOW TO BUILD NEW CABINETS in UNDER 3 MINUTES!
12:20
Просмотров 221 тыс.
The TRUTH About Ready-To-Assemble Kitchens Online
10:50
Buying Kitchen Cabinets - Beginner's Guide
14:20
Просмотров 230 тыс.
IKEA Cabinets vs HOME DEPOT Cabinets | Which is better?
11:55
How to Get a SMOOTH Farm Sink BUILD/INSTALL - Ep. 21
25:21
STOP overbuilding cabinets
15:13
Просмотров 925 тыс.
Build Cabinets The Easy Way | How to Build Cabinets
20:57
Kitchen Cabinet Colors - Avoid These 7 HUGE Mistakes!
9:49
3 Kitchen Cabinets To AVOID in Your Kitchen Layout!
4:55
МОЖЕТ ЛИ УКУСИТЬ СОБАКА
0:14
Просмотров 1,2 млн
I lost my kitten on the street😭 #cat #cats
0:32
Просмотров 165 млн
Эффектная подача Наполеона
0:58