How to Build PROTO5 Cinematic Racer | Exotic 5" FPV Drone Frame From Canada!

Подписаться 2,5 тыс.

Просмотров 12 тыс.

50% 1

PROTO5 is everything I enjoy about FPV put all into one frame. Now you can enjoy it too! Thank you for watching!!!
Frame Kit Available Now! (default Canadian currency shown)
P5 Cinematic Racer
www.protofpv.com/product-page...
P5 Core
www.protofpv.com/product-page...
Spares www.protofpv.com/product-page...
How to Use Protostrap! • How To Use Protostrap ...
P5 Reel: • PROTO5 | Cinematic Rac...
P5 stick banging: • PROTO5 Open Field Stic...
P5 forest freestyle 3pv: • Proto5 in the hands of...
P5 Flashbang mod: • Proto5 Flashbang Mod #...
P5 5 Essential ways to mount an action camera: • 5 Essential Ways to Fi...
Main Features:
1) 5 inch Squashed X geometry with no props in view
2) Exotic 1 piece Toray T700 plain weave matte carbon fiber base plate
3) Strong and stiff construction
4) Burnt blue titanium M3 screws for maximum weight reduction & performance
5) 4 convenient mounting zones for action cameras
6) Lighter than your typical 5" by more than 30~50 grams!
7) x2 WS2812 programmable LED lights included
8) O3 AU quick swap. Easily move or reinstall the O3 AU quickly
9) Designed to be universal - Analog, HD Zero, Walksnail, etc.
10) Battery can be top mounted or under mounted
11) Flexibility - 3 zones to mount your electronics
SPECS
Top plate: 2mm T700 CF
Base plate: 5mm T700 CF
Electronics Mounting:
Base Plate Front: M3 20x20, M2 25.5x25.5, M3 30x30
Base Plate Rear: M2 20x20 M2 25.5x25.5
Top Plate Rear: M2 20x20
Motor Mount: 16x16
Max prop size: 5.1"
Action Camera / Accessories Mounting:
Top Plate (front/back)
Rear Plate (front/back use supplied m2 nylon nut as a spacer)
Battery Strap Mounting: Top mount & Undermount
Recommended Camera Mounting Size: 19mm ~ 20mm (Variable)
Stand off height: 22mm
Stand off width: 28mm
Wheelbase: 171x132mm
Antenna mounting size: 3~4mm Post
Frame weight: 94.66g (no TPU)
Build weight potential: 300g ~ 355g (no lipo)
Top Speed: 170kph +
RECOMMENDED PARTS (Not Included)
Motors: T-MOTOR F60PRO V-LV 2207.5 KV1950 or any 2207 ~ 2306.5 1750kv ~ 1950kv
Power: 6S Lipo 1100mah ~ 4000mah 70C ~150C XT60 w/12 AWG wire
FC: Diatone Mamba F722 MK4 or equivalent
ESC: Diatone Mamba 55A 32bit or equivalent
AIO: iFlight BLITZ Whoop F7 AIOA
Alternative: Use powerful mini stack or 55A AIO for lightest build
CAPACITOR: Solder Directly + - Pads 35 ~ 50v 1000uF
Props: HQ HEADSUP R35 OR R38 RACING PROP 5.1"
VTX: DJI O3 AU / Walksnail / HDZERO / Analog
Receiver: TBS Crossfire nano RX w/Immortal T V2 or comparable in size and specifications
Build Target Weight Range: 300g ~ 355g (no battery)
0:00 What is a cinematic racer?
3:58 Build intro, LED light bars, TPU Feet
5:31 Electronic mounting configs
6:11 Stack Install
7:32 Motors and wire organization
8:40 Capacitor & XT60 length & Routing
9:28 Fabric tape & O3 AU Quick release mount
10:11 Stand offs, Antenna mount, Camera mount, T Antenna
11:06 Receiver location & Top plate & light bar
12:10 Protostrap & Tessegrip
13:08 Smoke stopper and PID tune
14:01 Recommended Props
14:20 Secure XT60 from prop strike
14:39 Weight and potential
15:07 Shark fin, Action camera mount & Special Features
16:55 End

Хобби

Опубликовано:

5 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 113

@PattyFlipz 26 дней назад

Hey guys! Some updates on PROTO5 - will update this whenever I remember. LOL UPDATES TO THE CINEMATIC RACER KIT www.protofpv.com/product-page/proto5-cinematic-racer 2 months back I added a nano RX TPU holder and rear GPS M10 holder. Few weeks ago I updated the O3 quick swap holder with integrated capacitor stay. The front camera cage can also install a ELRS or CFSR antenna, and the rear antenna holder can also fit an additional ELRS antenna. The VTX antenna can now also be secured with a zip tie for extra security. PROTO5 CORE www.protofpv.com/product-page/proto5-core-model An alternative with less prints, and steel hardware, and less $$$. Same great frame, same great flying performance! BANDO APPROVAL STATUS -Been bando'd every weekend over hardcore environments by MUG FPV. He confirmed the baseplate is bando approved. It's seen months of use and it's still not broken. Go ahead and send it. The only thing you might need to replace are stand offs, screws, and props.

@smokessauce Месяц назад

mine came in and i am starting the build tonight and tomorrow. cant wait to get her in the air. Thank you

@PattyFlipz Месяц назад

Awesome!! 👍👍👍 If you have instagram please tag me @protofpv would love to share your build too!

@KRYPTICFPV Месяц назад

Just purchased the proto5 with the pink tpu can’t wait to build it. This will be my most precious / prized build yet with all top quality parts hopefully you will feature it on you website. Totally stoked!!🥳

@PattyFlipz Месяц назад

Thank you so much!! I’m printing it right now!! 😂🙏 super fresh! yes please share your photos with me by email when you are done your build. Would love to post it up. Also tag me on ig @protofpv

@willpowerfpv3246 5 месяцев назад

This is pretty wild! I feel a little conflicted about a single piece base plate, but I like the overall idea, and aesthetically, it's beautiful. I do have a 5-inch freestyle that I don't fly because I'm not a fan of the heavy frame, so I may consider doing a transplant. Oh, Im in Alberta, so i like to support domestic fpv endeavors. Nice work, man! 🫡🤙🏻🔥

@PattyFlipz 5 месяцев назад

Thanks man!!! Yeah there's definitely downsides to convenience, but the additional performance is worth experiencing! :D

@gregdavidd 5 месяцев назад

Yeah that one piece base is a little concerning. I think in FPV things are always a trade-off though. I would probably never use it for pure freestyle.

@willpowerfpv3246 5 месяцев назад

@gregdavidd yeah that's just it. I think this is a really amazing design for somebody who only wants to own one or two drones and have it be sort of a Swiss Army knife . Aesthetically I think it's incredible looking, but the more I've been thinking about it all day, the more it kind of does the same thing as all of my different quads, but at the cost of some concessions. I have a open racer 03 race frame quad, and I have like six 5-in freestyle quads call in different geometry is, and I just built a sub 250 5 inch.. this doesn't really do anything that any of my other quads wouldn't, so if I do decide to build with this Frame it'll be mostly because I want to support a Canadian fpv frame designer, and that it just looks really cool. I appreciate that he is putting together a all in one package with all of the trimmings. For instance on my sub 2:55 in that I just built, I ordered titanium, aluminum, and PEEK screws, and that s*** adds up pretty quickly in the minimum order amounts.

@KRYPTICFPV 2 месяца назад

This frame looks amazing and i will be ordering one soon! I literally cant wait!

@PattyFlipz 2 месяца назад

Nice!! Happy to hear that!!!

@AsgardStudios 5 месяцев назад

That is a beautiful quad! That looks like the same field I've seen FalconRad fly from :)

@PattyFlipz 5 месяцев назад

Thank you so much! Yes it is a dedicated Rc field out here in Coquitlam BC which you can be invited by the members.

@gregdavidd 5 месяцев назад

Wow so cool. This frame is versatile! No two builds will be identical. Its awesome to be able to film forward and downward at the same time. Love the bloopers!

@PattyFlipz 5 месяцев назад

Thanks Greg!

@stzrogerio 5 месяцев назад

Fantastic!!!

@Phiqtional 4 месяца назад

I NEED this frame. I'm absolutely in love with the design and functionality. Plus it looks great! NEEEEEEEEDDD

@PattyFlipz 4 месяца назад

Awesome! I Didn't even need to do Jedi mind trick on you! OR did I? Jk, thanks for watching bro and looking forward to your future purchase!

@techgiant__ 5 месяцев назад

beautiful geometry, it looks like an incomplete star😍🤩 I must build this 😍

@PattyFlipz 5 месяцев назад

Thank you!! Looking forward to it. Please share photos when you do! :D

@hi_desert_rat 5 месяцев назад

Pretty cool. If it flies anything like my babyhawk2, I'm game. Nice job!

@PattyFlipz 5 месяцев назад

Thanks dude!

@2_damn_fly 5 месяцев назад

i keep saying i dont need another 5" and i dont need another quad...but i need this. The bloopers are hilarious

@PattyFlipz 5 месяцев назад

Hahaha I tell myself that too dude! I just started transplanting stuff from frame to frame after a while. I guess you can keep old frames as back up too

@2_damn_fly 5 месяцев назад

@@PattyFlipz I'd want more powerful motors for this than I currently have.. maybe those new Chris Rosser motors? What do you think? The tmotor issue he had seems annoying to me

@PattyFlipz 5 месяцев назад

@2_damn_fly yeah the Chris rosser ones will be perfect too 👌

@derekrobertson06 5 месяцев назад

I don't usually comment on ANY video but, i have to say that this is a beautiful frame. If it flies as good as it looks this is definitely something to be proud of. I drive a hyperblue BRZ...make one with a similar blue TPU set and I'll buy 2!

@PattyFlipz 5 месяцев назад

Thank you for the comment! Really appreciate it. Hyperblue is a really special colour! On the website I do have a filament that’s a lighter blue. Not quite the same but there’s the option! 😄

@derekrobertson06 5 месяцев назад

@@PattyFlipz mmm...humble pie. Lol. My next paycheck is spoken for then. I'm looking forward to building one of these!

@PattyFlipz 5 месяцев назад

Thank you Derek. Looking forward to it!!

@JohnIn2SonAZ 5 месяцев назад

Great Video Patrick, I can't wait to stock these at AddictivRC.

@PattyFlipz 5 месяцев назад

Thanks John!! Can’t wait to carry them at your store as well. Especially the build kits 👹❤️

@cristian_c 5 месяцев назад

It is quite interesting, the only issue I have with this frame, it is quite expensive.

@Q1320 5 месяцев назад

I agree, like uh it's 50 dollars more than a Apex Evo, but is it 50 dollars better? Personally I don't think so especially for a park flyer I wouldn't dare fly this near a bando or carpark over concrete not at that price, it is pretty though

@PattyFlipz 5 месяцев назад

Thanks guys. No worries. This is my first frame.. had to make it kinda crazy and stand out from the crowd. I never like blending in. I’ll be releasing more stuff in the future for folks of all budgets 👍

@Q1320 5 месяцев назад

@@PattyFlipz the more I look at it I think may build it this spring it is really pretty 😍😍😍😁

@PattyFlipz 5 месяцев назад

@Q1320 yeah man!! It’s gonna be sick

@peternguyen3732 4 месяца назад

Beautiful! Iike a Ferrari! And a industrial designer too like me ! Great job :)

@PattyFlipz 4 месяца назад

Sup fellow designer bro, Thank you for the kind comments and 🙏 for watching as well!

@zlachannel8674 5 месяцев назад

take my money....love it

@JDDupuy 5 месяцев назад

Did you see the cost? C$185.00.

@PattyFlipz 5 месяцев назад

Gladly! 😅😂

@PattyFlipz 5 месяцев назад

T700 cf and all titanium screws plus full set of tpu prints plus highest living costs in Canada ever :) and my design time. :)

@zlachannel8674 5 месяцев назад

@@JDDupuy oups im stepping back, 😅😅 this is expensive

@LehtusBphree2flyFPV 5 месяцев назад

This frame is perfect for the L.E.D. Ribbon on the edges. My first 3.5 drone and still have is the Baby Hawk 2 HD and asked the same thing. I wish this frame was in a 5-inch. Emax doesn't care too much for recommendations, I've done the same thing. Now seeing this that will have to same tech as Baby Hawk 2 ridged frame. I love the antenna in the front but was wondering if there's a way to 3D print a pocket for the RX to sit in instead of zip ties. Zip ties break easy. But I'm getting one anyway. Quadmula is great and all, but this is more versatile. The top or bottom battery mount is KING DING A LING bad AF. It'll be easy to put a GPS off the side of the Frame or 3D print a holder. Good job bro I love it.

@PattyFlipz 5 месяцев назад

Thank you bro all the way!! Glad you understand the frame and No doubt, It’s still a work in progress , def. Can use even more refining for sure (instead of zip ties for some areas) and I’m happy to hear you will pick one up! The rx pockets a great idea. Can totally sit between the stand offs for sure. Will add when I can!!

@LehtusBphree2flyFPV 5 месяцев назад

@@PattyFlipz my order just came through the green tpu. Thank you bro we need others to check this out. Even Bardwell.

@PattyFlipz 5 месяцев назад

Thank you for helping me spread the word!! Looking forward to working on your order!!

@genjitsu7448 5 месяцев назад

Very nice design. I like the fact that you noted that the design aesthetics are also very important. This frame looks modern. Have you looked at the black box files and compared the tunes and resonances to other high end quads? You should reach out to the FPV retailers to get your frame into their shops. The only thing that I can think of that people will be concerned about is if you break an arm you have to replace the entire frame.

@PattyFlipz 5 месяцев назад

Hi! Thank you for the kind comments. Yes i wanted to make something different and striking and yes replacement is expensive, like crashing a super car haha. Except this one will take a few hard hits before something really bad happens. 😆 I’ve spoken to my first dealer in the US. John at shop.addictiverc.com will carry it possibly mid- end of January and the plan is he will offer build kits with race spec motors and fc etc. You can check out my log done in July 2023. www.protofpv.com/product-page/proto5-cinematic-racer it’s under the tab proto testing. It’s a conservative tune and can possibly go a few more notches towards aggressive, motors just might heat up lil more. You can download the log, video and check to see what I did. As for comparison to my other frames, no I did not compare their baselines to p5. But that be interesting 🤔

@TorontoFPV 5 месяцев назад

nice work! any chance you know a good place for m2 titanium?

@PattyFlipz 5 месяцев назад

Thanks! I’ll be putting m2 ti screws on my website when it’s ready 👍 in a few weeks. Otherwise you can websites like aliexpress. Just search m2 titanium screws

@jeffdughman9741 5 месяцев назад

Ill buy some when i see i them for up for sale man 🤘

@PattyFlipz 5 месяцев назад

Thanks man!! Appreciate the support. Here is the product link: www.protofpv.com/product-page/proto5-cinematic-racer

@axelkunze4117 5 месяцев назад

I found you, when you shared your LR4 PIDs and expirences and was already sold on the P25, which I've already ordered for XMas 😀Now it's stuck somewhere on the way in Germany ... The P5 was also in my shopping bag, but I have to admit I'm not a racer, more like a cinematic Explorer ... now I saw how versatile your unique frame is, maybe you have a setup recommendation for a more LRish setup? In this case I would be sold again for my birthday, which is in January (lucky me), because the more I look at this unique frame the more I love it ... And yeah, really nice work!!

@PattyFlipz 5 месяцев назад

Thank you so much!! I got more stuff in the works… :) hint hint.. LR 6” (like explorer and the looks of p5) Im going to test it next month. Will update all of you on the progress. You are going to love it.

@axelkunze4117 5 месяцев назад

Oh wow, thanks! I‘ll try to be patient… Any hint on the weight? Because here in the EU everything is getting more and more restricted…

@PattyFlipz 5 месяцев назад

@axelkunze4117 oh sorry to hear that! It’s gonna be lighter than your typical 6” but by how much not sure yet. I’m getting the samples made right now. Stay up to date on the community section on my RU-vid channel I’ll post stuff there :D

@axelkunze4117 5 месяцев назад

@@PattyFlipz I will :)… hopefully it will be stiffer than my modded Rekon LR6 amd likewise light (270g) :)

@LehtusBphree2flyFPV 5 месяцев назад

Hey patrick could you create an STL file for the mount up top to support a beeper to fit into so we can find it easier when it goes down. I try to put a beeper on all my quads but most frames dont have enough space for one. I need to learn how to make STL files and turn the gopro mount into a beeper holder so you can see the LED flashing also.

@PattyFlipz 5 месяцев назад

I will consider it for sure! I use blender to make most of my files. It’s pretty easy to learn, email me if you need any tips.

@LehtusBphree2flyFPV 5 месяцев назад

@PattyFlipz yes thank you. I need to find a video on blender

@suicidequad 5 месяцев назад

the design and features are outstanding. what about vibrational performance and durability for freestyle? would this be an option for a 5" sub 250 build? :)

@PattyFlipz 5 месяцев назад

No this won’t be able to do sub250. The 5mm t700 base plate itself is already 90g. going to attempt and try to do a sub250 4” with similar form factor but I haven’t put pen to paper yet. Vibrational performance is good. You can check the black box log on the product page under proto testing. With a good tune it is very agile with virtually no prop wash. Tested up to 170kmh so far, can go faster probably with higher kv and pitch. stop on a dime with a blip. Durability can take a few hits into concrete but if you do it too much the cf will start splitting of course, (before total dual arm failure) like all other cf. If you do bando im making a tank frame which is scheduled for next release but this will be similar to other frames on the market today. P5 is just for enjoying very fast flying and film versatile cinematic more so than any 5” frame in existence. But don’t get it if you know you will crash very often 👍 😅

@suicidequad 5 месяцев назад

i wil crash oftenl lol. thank you for the comprehensive answer. i love your project even just from an aesthetics and egineering standpoint. this is one of the few really innovative designs and truly visually pleasing.@@PattyFlipz

@suicidequad 5 месяцев назад

ive seen your filters and they are very conservative from what i understand. so it would be interesting to check out logs. @@PattyFlipz

@PattyFlipz 5 месяцев назад

@GuessWhoFPV thank you!! 🙏

@richardruckert7954 5 месяцев назад

Hi…do you have any unstabilized footage from the 03?

@PattyFlipz 5 месяцев назад

Sure I will look into it and get back to you :)

@richardruckert7954 5 месяцев назад

@@PattyFlipz thank you

@PattyFlipz 5 месяцев назад

Hi Richard, Can you email me at info@protofpv.com ? I will send you the video there. Thank you.

@texowaste Месяц назад

I loved shoving it in the hole, especially the tip.

@PattyFlipz Месяц назад

😂😂😂

@dimonik12 4 месяца назад

Canadian Shekels are scary... I wrote a comment about how you might want to push the British price as it looks much nicer C$195 Vs 113 GBP, it was only after almost pressing comment I thought maybe check if the site does show others and yup... But the point still stands, some of us are bloody stupid and I was using a separate site to convert just from habit... I looked before and was scared away without even bothering to check the exchange, all the hype around that 2Raw trellis had me crunching numbers this time and what I found out was surprising. The only 5" I fly is a race/chase copter, light and with an action 2 so I really like the concept as it is what I use already just not quite as pretty.

@PattyFlipz 4 месяца назад

Thank you for the feedback! Yeah I had a feeling the high number on the CAD is scaring people off who aren’t use to shopping in anything other than USD. For now I added a note to the top of the website saying this is Canadian dollars (my countries currency) and telling customers to check their currency using the tool. I definitely need to figure out a better way cause the website is limited in its options. Maybe an app I have to pay for so website senses where you are from and displays your local currency automatically. 👍

@PattyFlipz 4 месяца назад

More the reason to fly your current 5” harder and if you break it really badly, I look forward to having you as a future customer! 😂👍

@dimonik12 4 месяца назад

@@PattyFlipz It is on my Wishlist, just a case of finding nice fairy to make my wishes come true... By pimping it out...

@PattyFlipz 4 месяца назад

@@dimonik12 XD, hey go on my website right now, is it automatically do GBP? (assuming you are from there?) I just added an auto detector app. :D

@dimonik12 3 месяца назад

@@PattyFlipzJust had to double check as I had not even noticed 😵‍💫 Theres a green P5 on its way, I also asked Ian @MadRC (Mads Tech) if he wants to do an overview/unboxing type vid on it but no reply yet. If he does I will let you know.

@woutervossebeld4664 Месяц назад

1:40 Thats way too loud compared to the voiceover. Cool frame tho!

@spawnisalive 5 месяцев назад

I don't see any camera protection.

@PattyFlipz 5 месяцев назад

The tpu camera cage sticks out past the camera. I mean if a stick or narrow rock somehow made it in between it will hit the camera but that goes with all frames unless you shoot through some poly carbonate cover haha

@spawnisalive 5 месяцев назад

@@PattyFlipz in regular frames carbon cage takes all the impact protecting the camera but in tpu cage all the front impact will pass on to camera. These digital cameras are expensive , I don't see how the camera will survive a minor front pole collision with tpu cage collapsing.

@PattyFlipz 5 месяцев назад

@spawnisalive yeah I get it but the tpu used is 95A quite rigid at 4mm thick. it’s not entirely flexible and it’s butted up against the carbon fiber top and bottom plate . I haven’t broke a camera yet though. (I did break a nd filter 😮)I did smash this thing head onto concrete blocks on purpose during testing. if you need the front cage to be even tougher, all the STL files are provided online. You can make it fully enclosed and fit any future camera you want. I do have other frames in the works and they are all carbon cages, but with that there are width limitations for future cameras. Let’s say somehow they release a 21mm wide camera, most frames will be screwed and need a complete redesign of the top and bottom plate and camera cage. Then consumer will need to repurchase the new frames and all American companies drag behind redesigning their frames too. This is what happen when DJI release the o3 au. That can get expensive too. Thank you for the feedback though and I was considering it for future proto5 frame of course 🙏 drawbacks and decisions to everything we do but it’s all about finding optimization and balance for sure.

@sagivlevi 5 месяцев назад

145$ for frame, it should be made of gold

@PattyFlipz 5 месяцев назад

hahaha, it is made of T700 carbon fiber (heavier, more durable than T300) plus titanium and aluminum. All the metals much cooler and lighter than gold XD Thanks for watching

@sagivlevi 5 месяцев назад

I have nothing about your frame, its very nice, but i am done spending a fortune for frames they all break, i think the design is cool but its not practical, so any crash damage will require new base plate that cost 100$, instead of an arm or bottom plate like other frames makers.

@PattyFlipz 5 месяцев назад

@sagivlevi don’t worry I’m making a bando quad. Will be cheaper to replace stuff :)

@terpsquirter7107 3 месяца назад

i fuck with it no doubt but 140 usd i cant justify thats more than the price of most 7" frames i could see like 85 but 140 is way too much

@PattyFlipz 3 месяца назад

I’m coming out with a steel screw version with less prints. Will be cheaper. Look out for it! 🔥💪

@terpsquirter7107 3 месяца назад

@@PattyFlipz will do i am curious though why is this frame so expensive is there a ton of wasted carbon when making it or what?

@PattyFlipz 2 месяца назад

@terpsquirter7107 yeah besides the carbon wastage and being T700 cf plate is stronger more durable and more expensive than the regular grade of T300 cf plate others may use . It comes with 25 burnt blue titanium screws including the M5 action mount holder screw. titanium is half the weight of steel. To put it into perspective, 1 of these screws can probably buy 10 steel screws. so not cheap. It also comes with 16 3d printed pieces where you choose a colour and I personally print them for you. I’m from Vancouver canada. Very high cost of living here 😂 packaged and ships out from Canada.

@terpsquirter7107 2 месяца назад

@@PattyFlipz haha fair enough g It’s a dope frame seems super rigid

@PattyFlipz 2 месяца назад

@terpsquirter7107 thanks bro! Keep tabs with my IG or community section I’ll let you guys know when the base model comes out!

@itsgonetoofar 5 месяцев назад

it's cool untill you break an arm

@PattyFlipz 5 месяцев назад

Yeah breaking an arm won’t be pretty but luckily p5 has 8 arms.

@itsgonetoofar 5 месяцев назад

@@PattyFlipz someone would really have to need to save weight to pay 100$ for every broken part

@PattyFlipz 5 месяцев назад

Hehe, I just skip breakfast and lunch. All good. Jk I know this design isn’t for everyone, but I have other designs in the works. :) it’s gonna be the typical bando basher with replaceable arms, except it’s gonna be pretty. Now we can all eat more steak! 🥩

@faysalahmed9769 5 месяцев назад

I will buy one of these one day, Fpv is my hobby 😊

@PattyFlipz 5 месяцев назад

@@faysalahmed9769 Thank you, looking forward to it :)

@brycepope1714 5 месяцев назад

I’m currently putting together my parts list for my first ever drone & I absolutely luv the aesthetics and weight of this frame.(I’m also a super car enthusiast & the monocoque reference 🤌🏼) but just like others mentioned the one piece is concerning especially with the cost of replacing it, so just curious if you’ve durability tested it? Lol I’ve been doing my time in the sim so I’m not a terrible pilot by any means but crashing is inevitable especially with freestyle , so would luv to knw how it holds up.

@brycepope1714 5 месяцев назад

Or should I maybe wait for your freestyle basher 🤔, since there’s only tpu protecting the o3 on this one?

@PattyFlipz 5 месяцев назад

It’s gonna be a couple months down the road and it’s will be around 400g with a full stack.

@PattyFlipz 5 месяцев назад

I crashed it into concrete blocks and dropped it from the sky on purpose. After multiple hard hits there can be slow splinter fracture of the affected side but drops from half a meter here and there is totally fine. Tpu print holding the o3 is 4mm thick each side and butted against cf frame. GoPro is much more exposed if you use it up top etc if you think about it. In my mind I did design the frame for experienced pilots looking for change but thinking about it might be a good one for someone’s first frame too. If you plan to bando very often, I would not use this. Just like you don’t bando a super car haha