Тёмный

How to Center the rear end after Lowering Trans Am WS6 Camaro SS 

TWA Motorsports
Подписаться 73 тыс.
Просмотров 40 тыс.
50% 1

How to Center the rear end after Lowering Trans Am WS6 Camaro SS
After lowering my WS6 the rear of the car is no longer centered. Installing an adjustable panhard rod gives you the ability the put this back to the correct location. I am now running 17x11 wheels in the back with 315 tires. This helps keep these from rubbing. I have used several different vendors in the past but like BMR and UMI the best. I also like the poly / rod end due to less bind. Sometimes poly/poly binds and rod/rod is super noisy. This is the best of both worlds!! This process is the same from 82-02 Fbodys. This also is the same as a panhard bar install for firebird, trans am, firehawk, formula, camaro, ss, z28,
Parts used
Adjustable BMR Panhard Rod options
Poly/Rod End ebay.to/2LMZ9Dy
Poly/Poly amzn.to/2vv5UPp
Rod End/Rod End ebay.to/2v6SGZO
Non Adjustable BMR Options
Chrome Moly ebay.to/2vtPjLV
DOM ebay.to/2O6b7VN
UMI Options
Adjustable Poly/Poly amzn.to/2n1nhU2
Non Adjustable Poly/Poly amzn.to/2LLjTf6
Double Adjustable Roto amzn.to/2vcjPdM
On Car Adjustable W/Roto amzn.to/2O4g9ls
Single Adjustable W/Roto amzn.to/2n4794v
Poly/Poly Adjustable amzn.to/2KiFaXC
Current Wheel/Tire Setup
Front Wheels(Torque Trust 17x9.5) amzn.to/2LEDZ9K
Rear Wheels(Torque Trust 17x11) amzn.to/2JV98Rv
Lug Nuts(Billet Specialties) amzn.to/2LBIpyc
Front Tires(NItto G2) amzn.to/2mH3OYD
Rear Tires(Nitto NT05R) amzn.to/2OipKpF
Subscribe and Follow TWAmotorsports
RU-vid: / twamotorsports
Instagram: / twamotorsports
Email: twamotorsports@hotmail.com
Video Equipment used to make this video(Need to update)
Gopro Hero 6 Black amzn.to/2NGLPxT
Gopro Hero 3 amzn.to/2rwZv5j
Gopro Session amzn.to/2IZprAp
OSMO 2 amzn.to/2s4NRxO
Osmo gopro adapter amzn.to/2IEwX0c
Video editing amzn.to/2KOrdCo
Photo editing amzn.to/2I6X9jO
Disclaimer:This video and description contains affiliate links, which means if you click on a product link, I'll receive a small commission.

Опубликовано:

 

15 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 216   
@ajtindall6599
@ajtindall6599 5 лет назад
Thank you i watch this and save it till I get to my suspension and now I’m finally working on my suspension. Another great video thanks again.
@TWAMotorsports
@TWAMotorsports 5 лет назад
Awesome. Hopefully it helped you. More to come.
@ajtindall6599
@ajtindall6599 5 лет назад
Yes it help me out. The main video that help me out a lot was the 4160e cause I’m getting mines beef up. I could’ve done it by just trying to learn on my own but you guide me through it. I hope you get more subscribers bro, as for me I’m a fan and thanks for the videos keep them great vids coming bro. I even tell my kids to leave me alone as soon as I get a notification lol. Thanks again.
@TWAMotorsports
@TWAMotorsports 5 лет назад
@@ajtindall6599 thank you. Love hearing that👍
@kennethdefreitas3120
@kennethdefreitas3120 4 года назад
Thanks bro my 2000 ws6 rear sits slightly in on the left I’m going to do this soon very helpful 👌🏽👍🏾👍🏾
@TWAMotorsports
@TWAMotorsports 4 года назад
You're welcome. Glad I could help
@markburton9614
@markburton9614 6 лет назад
That method will center it to the body of the car but not to the suspension. Best DIY way is to buy a roll of the thick brown postal paper and tape that down to the concrete below the rear half of the car. Drop some plumb bobs below the rear axle to create/draw the axle on the paper. Drop a plumb Bob to mark the position of the axle and body side mounting points of the Lower control arm and connect those points to make a line representing the lower control arm. Use a carpenters square to verify the lines you dropped of the rear axles and LCA are perpendicular to the body mount of the LCA. If they are not then just measure over how far the axle needs to move laterally, move it and recheck.
@TWAMotorsports
@TWAMotorsports 6 лет назад
Mark Burton I am in complete agreement. I should retitle the video. The main reason I did this was to center the rear in the fenders for tire size. Thank you for explaining this so people can do this to truly center the rear end. 👍
@kenyanr1
@kenyanr1 5 лет назад
Would you mind making a video showing this method, step by step?
@TWAMotorsports
@TWAMotorsports 5 лет назад
@@kenyanr1 I tried to do that in this video. If you have questions maybe I can help.
@jayeatyou323
@jayeatyou323 5 лет назад
your car is beautiful. hope you dont mind me checking her out. i also just picked up a camaro 1999 slp 6 speed for $4200. very clean. so clean it even have the dealer sticker😍
@TWAMotorsports
@TWAMotorsports 5 лет назад
Thank you. That sounds like an amazing deal
@jayeatyou323
@jayeatyou323 5 лет назад
bro it fucken was. i didnt even had to test drive it. i thought i was gonna disrespectful😂 the guy i purchase it from seem financial stable. but wait theres more, craiglist always have deals like these. you just gotta be patience. one time i saw a 2001 slp 6 speed camaro black on black going for $3500 dual to the fact that the guy had family issues.
@djbean1981db
@djbean1981db 5 лет назад
Great video. I plan on doing things to my 3rd gen Camaro.
@TWAMotorsports
@TWAMotorsports 5 лет назад
Thank you. Its definitely needed if lowered
@markwasek912
@markwasek912 4 года назад
Bad ass beautiful car...I have 95 Camaro Fbody... thanks for pan hard install...u did excellent job... thanks
@TWAMotorsports
@TWAMotorsports 4 года назад
Thank you
@325hpls1
@325hpls1 5 лет назад
Love it man!
@TWAMotorsports
@TWAMotorsports 5 лет назад
Thank you
@sswcubes
@sswcubes 5 лет назад
Great vid.
@TWAMotorsports
@TWAMotorsports 5 лет назад
Thank you
@gtman101
@gtman101 6 лет назад
I have a 4th gen trans am. Any videos on replacing rear end gears with 3.73's/4.10's.Another idea how to wire up a shift light or air/fuel gauge?
@TWAMotorsports
@TWAMotorsports 6 лет назад
gtman101 I don't have the Equipment to set up gears properly. My car is an auto or I would show a shift light. I will make a video when I install the air/fuel gauge though👍
@Cheeseburgerperson141
@Cheeseburgerperson141 6 лет назад
Ta looks identical to mines I have same color and same rims 👍👍
@TWAMotorsports
@TWAMotorsports 6 лет назад
Dave Rodriguez you must have great taste in cars 😁👍
@Uberkamper
@Uberkamper 6 лет назад
Dual 96' Formulas here, subbed. I"m curious about your offset on both front and rear wheels. I'm looking at the Torq Thrust IIs which looks like you're running now. I"m going to roam through your other videos incase you already covered it. TIA :)
@TWAMotorsports
@TWAMotorsports 6 лет назад
Uberkamper thanks for watching and subscribing. Wheels are 17x9.5 front with 7 1/8 BS. Rears are 17x11 with 7.75 BS
@TeamSexyPaintball
@TeamSexyPaintball 2 года назад
I like your videos. I wish you'd do this stuff to a manual car.
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you. You sure can
@bigjohnharvey
@bigjohnharvey 6 лет назад
Thanks 4 the info. Very helpful
@TWAMotorsports
@TWAMotorsports 6 лет назад
Thank you
@joebeck0
@joebeck0 6 лет назад
gosh man watching your vids makes me want to work on my 02 z28 sooo bad. everything is stock rn besides the cutout i have right before the i pipe. Could I get your opinion on some upgrade ideas I have and what to do first(daily driver)? I am on somewhat of a budget, E2 in the Air Force...lmao. Upgrade Ideas: PowerStop z23 evolution brake kit / calipers (i've been told this is a waste of $, and that i should just get hawk hps pads and new blank rotors instead of the slotted/drilled) SLP intake lid w/ smooth bellow coupler slp lm1 I really want to do longtubes (BBK 1694) but im in california and dont have a "guy". Let me know, thanks man
@TWAMotorsports
@TWAMotorsports 6 лет назад
Joe Beck I like lid and exhaust for the first things on daily driver. As far as the brakes you will like an upcoming video where I address this.
@jayolay9572
@jayolay9572 6 лет назад
Go to foundersperformance.com nro suspension parts cheap asf
@travisquintero8334
@travisquintero8334 4 года назад
You do a really great job of going step by step ... My question to you is it necessary to have the wheels on the Pan Rod.. can it be done with the wheels off
@TWAMotorsports
@TWAMotorsports 4 года назад
Thank you. No you don't have to have the wheels one.
@luishigareda8494
@luishigareda8494 4 года назад
Awesome Video!
@TWAMotorsports
@TWAMotorsports 4 года назад
Thank you
@dylanryan9192
@dylanryan9192 4 года назад
What did you end of measurements on both sides? Did you adjust til both sides were same measurement or? Thanks
@TWAMotorsports
@TWAMotorsports 4 года назад
That's right. I moved until string to tire was equal on both sides.
@JerryMFD93
@JerryMFD93 5 лет назад
Are you running a stock rear end? I’ve been all over forums for a nice wheel and tire set up but no one mentions their RE. I know a lot of people shorten, or swap for 8.8 or 9.
@TWAMotorsports
@TWAMotorsports 5 лет назад
i am running the stock rear end for now.
@DickVanNiggz
@DickVanNiggz 4 года назад
TWA Motorsports I just swapped my (very broken) 10 bolt for a strange s60, and I’m all stock suspension and ride height wise but it’s maybe 3/8 inch off center, you figure an adjustable phb would help my issue?
@IrocinZ
@IrocinZ 4 года назад
How the hell did you get that much tire back there??!! Thats badass! What did you use for back spacing? I'm looking at putting 18's on my IROC because of the big front brakes...
@TWAMotorsports
@TWAMotorsports 4 года назад
Thank you. 315s fit really well in these cars.
@tylerdirden3416
@tylerdirden3416 6 месяцев назад
Can you take a measurement of the stock panhard bar, center to center of the holes? I can grab my UMI and move it up and down a couple of inches, and i feel it should be solid so was thinking i may have the wrong length adjusted as i didn't have a stock panhard bar to mimick length with?
@TWAMotorsports
@TWAMotorsports 6 месяцев назад
I don't have my stock bar anymore
@martiniusetihw
@martiniusetihw 2 года назад
Awesome video brother!!! I was wondering what size are your rims and tires on the rear. I like the Stance. I am assuming that the front are stock.(275 40 17) I love the way your car is sitting.
@martiniusetihw
@martiniusetihw 2 года назад
Sorry scratch this question, you already answered it. My bad. Smh.
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you. Rear is 315/35
@TWAMotorsports
@TWAMotorsports 2 года назад
Lol. No biggie
@devsta67
@devsta67 4 года назад
Great video man just picked up a 95 will that same bar work on my year and where did you get it having a hard time finding an adjustable one that looks like that
@TWAMotorsports
@TWAMotorsports 4 года назад
Thank you. It will work. Same one. Link in description of video
@markb4448
@markb4448 4 года назад
I have a 2001 WS6 and a 99 Trans Am Just Subscribed. I have the torque thrusters also, what offset are your rear wheels?
@TWAMotorsports
@TWAMotorsports 4 года назад
Thanks for subscribing. Sounds like you have good taste in cars lol. My rear bs is 7.75" on a 17x11
@dissensionrammbock6331
@dissensionrammbock6331 4 года назад
Lol..I need that one wheel you have on the wall there 😏,mine cracked when I hit a damn pothole.
@TWAMotorsports
@TWAMotorsports 4 года назад
Lol. That wheel is destroyed on the back.
@Brick-Flix
@Brick-Flix 6 лет назад
Hey you seem to know a lot about cars. Do you think you could help me lower my Challenger?? It's just a v6 tho...
@TWAMotorsports
@TWAMotorsports 6 лет назад
dallis weber I only lower v8s 😀
@gonzalosolorio9717
@gonzalosolorio9717 5 лет назад
Hey man do you by any chance know where i can find any oem side skirts ?
@TWAMotorsports
@TWAMotorsports 5 лет назад
I don't. Sorry.
@midsouth2strokes185
@midsouth2strokes185 4 года назад
I swear the right rear sits inward slightly on both my stock 99WS6 and 95 Z28from te factory. It drives me crazy🧐
@TWAMotorsports
@TWAMotorsports 4 года назад
Chances are it does.
@paulcabinatan2390
@paulcabinatan2390 6 лет назад
What about doing Energy suspension Poly bushings all around?
@TWAMotorsports
@TWAMotorsports 6 лет назад
Paul Cabinatan you could but the stock peices are stamped and are very flimsy.
@sprsprtrudy
@sprsprtrudy 5 лет назад
Poly bushing anything you can youll be better off but the trailing arms and panhard bar stock are weak better to upgrade those.
@trunkbangking
@trunkbangking 5 лет назад
Did you ever do the panhard bar relocation kit? Not sure if i seen ya do it in any videos.
@TWAMotorsports
@TWAMotorsports 5 лет назад
No I haven't done a relocation. Those are built for those with exhaust clearance issues. I don't have that problem at this point.
@trunkbangking
@trunkbangking 5 лет назад
@@TWAMotorsports oh okay.was just curious cuz its hard to find videos on that..i plan on doin on when i do the panhard bar.cuz my tailpipe sits on the top one.are double poly ends okay or do you recommend the one you put on? The binding issue you talked about kinda sketches me out a little.
@TWAMotorsports
@TWAMotorsports 5 лет назад
@@trunkbangking well poly does bind but its quiet. I like poly and rod combo. Best of both worlds.
@trunkbangking
@trunkbangking 5 лет назад
@@TWAMotorsports okay..I'll go with that than..thanks again with the quick reply and info.
@TWAMotorsports
@TWAMotorsports 5 лет назад
@@trunkbangking you're welcome buddy👍
@transam5740
@transam5740 2 года назад
I have the same wheel set up as you and occasionally I'll rub the lip on the fender if I hit a bump just right and im on stock ride height i was wonder do you rub now that your lowered cause I'd love to lower mine as well
@TWAMotorsports
@TWAMotorsports 2 года назад
Mine do not rub
@edgarm8933
@edgarm8933 3 года назад
I’m going to get strand springs and koni shocks installed. I’m assuming I will need this. What shop installs this ? Muffler shop ? Regular car shop ?
@TWAMotorsports
@TWAMotorsports 3 года назад
Regular shop could I guess
@Jaycooks323
@Jaycooks323 4 года назад
I did this but I ran out of adjustment, gonna have to take it to a pro
@TWAMotorsports
@TWAMotorsports 4 года назад
That's odd. Never seen that happen
@jtome84-91
@jtome84-91 11 месяцев назад
Do you run spacers for the torq thrusts on the front for calliper clearance ?
@TWAMotorsports
@TWAMotorsports 11 месяцев назад
No
@trunkbangking
@trunkbangking 5 лет назад
Where can you get am upper bar?? I can't find them . Also my 99 z28 is lowered, what is biggest widest tires i can fit on front ? I have 15x3 now but would like to put regular wheels on all around
@TWAMotorsports
@TWAMotorsports 5 лет назад
Bmr should have them. It's for a panhard relocation. I have a 17x9.5 up front. I have had a 18x10 in front on past fbodys though.
@trunkbangking
@trunkbangking 5 лет назад
Okay .i wanna get new wheels eventually with some 15x9 or 15x10 on rear and maybe 15x7 on front
@TWAMotorsports
@TWAMotorsports 5 лет назад
@@trunkbangking that would be nice for drag racing
@trunkbangking
@trunkbangking 5 лет назад
@@TWAMotorsports right.if i dont go that route i might go 17s.. Definitely want something wider.only running 235-60-15 at the moment in the rear
@TWAMotorsports
@TWAMotorsports 5 лет назад
lots of wheels look good on these cars
@jayeatyou323
@jayeatyou323 5 лет назад
my friend! where did you jacked the rear from?🤔
@TWAMotorsports
@TWAMotorsports 5 лет назад
Center of the differential and supports under axle
@jayeatyou323
@jayeatyou323 5 лет назад
@@TWAMotorsports awesomeness. i just checked it out. i know where now
@AllTimePerformance
@AllTimePerformance 5 лет назад
Twa did you use both of you factory bolts? I got the adjustable with poly on both sides. On one side my factory bolt wont slide in all the way bc of the sleeve on the bolts.
@TWAMotorsports
@TWAMotorsports 5 лет назад
I was able to use my factory bolts. You buy a bmr panhard?
@AllTimePerformance
@AllTimePerformance 5 лет назад
TWA Motorsports yes. I’m thinking the wrong pushing got put in it from bmr. I’ve sent them an email. Hopefully hear something tomorrow.
@TWAMotorsports
@TWAMotorsports 5 лет назад
@@AllTimePerformance yeah that's odd
@AllTimePerformance
@AllTimePerformance 5 лет назад
Talked to bmr it had the wrong brass sleeve.
@TWAMotorsports
@TWAMotorsports 5 лет назад
@@AllTimePerformance nice. That's good at least
@tonyhintz9166
@tonyhintz9166 4 года назад
Are you running LCA relocation brackets? Is it even necessary for a street only car? I'm trying to lower my T/A but not sure if I need them. Thanks!
@TWAMotorsports
@TWAMotorsports 4 года назад
Yes I am and if you lower you want them for sure
@davesfixits6583
@davesfixits6583 5 лет назад
Dave's Fix-It subscribe
@TWAMotorsports
@TWAMotorsports 5 лет назад
Thank you. I really appreciate it
@seabass3096
@seabass3096 6 лет назад
Do I need to have a adjustable phb when I lower it or can I get a regular umi phb
@TWAMotorsports
@TWAMotorsports 6 лет назад
seabass yes you need an adjustable if you are lowering
@peterwindle4453
@peterwindle4453 5 лет назад
Hey there, just curious... why would lowering make the rear non-centred?
@TWAMotorsports
@TWAMotorsports 5 лет назад
Because the stock panhard length doesn't change so as the car gets lower the rear has no option but to push out. You could measure and cut your stock one but that's a lot of work.
@peterwindle4453
@peterwindle4453 5 лет назад
@@TWAMotorsports thanks. The reason I ask is because I think my rear end might be a little out of whack, not sure so I'll have to plumb-bob test it like you did in this video. The car feels a little different between a left slow turn to a right slow turn... but I'm un-sure if this is due to the fact that the steering has been converted to RHD or not. I have had the front and rear springs re-set, not so much "lowered", but slightly different to original. I am also having wheel-hop on the left hand side, so there could be an in-balance here. In addition to this, the diff is staring to make whining noise under load at speeds of 80-100 km/hr.
@TWAMotorsports
@TWAMotorsports 5 лет назад
@@peterwindle4453 holy cow that's a lot of stuff. Check the rear with a plumb Bob. Wheel hope can be fixed with lower control arm relocation Brackets. Good luck with it. Hopefully you get it ironed out.
@peterwindle4453
@peterwindle4453 5 лет назад
@@TWAMotorsports yeah, none of it's major stuff, but annoying. Being a US car in Australia, it costs me a LOT more to get parts here as well...
@rudylsp1444
@rudylsp1444 6 лет назад
You didn't show us how to actually adjust it. I need to adjust mine on my firehawk.
@TWAMotorsports
@TWAMotorsports 6 лет назад
Dragtv FirehawkLSX with the jam nuts loose you spin the center clockwise or counterclockwise to move the direction you need. Then tighten the 2 jam nuts back.
@rudylsp1444
@rudylsp1444 6 лет назад
TWA Motorsports thanks bro
@TWAMotorsports
@TWAMotorsports 6 лет назад
Dragtv FirehawkLSX you're welcome
@dmlandscapedesignllcatlant8093
@dmlandscapedesignllcatlant8093 3 года назад
Hey i put a 12bolt iny fbody and now the tires rub the front of.the quarter panel any knowledge what i need.t9.do
@TWAMotorsports
@TWAMotorsports 3 года назад
Probably need adjustable control arms to move it back to center
@Eric-lf6yx
@Eric-lf6yx 6 лет назад
Have you thought about engine mods? My WS6 has just about all the bolt ons. so I’m interested in mods like air box mods (i.e. JAAM), heads, cam, and intake.
@TWAMotorsports
@TWAMotorsports 6 лет назад
Eric I have and will be doing some of those a little at a time.
@martiniusetihw
@martiniusetihw 3 года назад
Awesome video brother. I really liked the way you showed how the pan hard rod shifts the body. Cool!!! Thank you for that!! Now I know I am going to get an adjustable one!!! Any suggestions for tires. I recently found out my factory 275/17/40 tires are becoming really hard to find. Any suggestions. I am thinking about 305's all around, what do you think??
@TWAMotorsports
@TWAMotorsports 3 года назад
Thank you. Yeah adjustable is the only way to go. I like that stock size. I think 305 would be too big
@BB-fr1sm
@BB-fr1sm 3 года назад
Look at Firehawk Indy 500. I just put a new set on my 2000 TA last month. I have run them for years. 275/40/17 front 275/35/18 rear. Falken Azenis 660 is another good one available in 275/40/17. They make a 315/35/18 that is good for the rear too is. Be careful trying to go to 305 on the front. Tire rub becomes an issue. A friend tried it on his 99 TA and took them back off due to clearance issues.
@TWAMotorsports
@TWAMotorsports 3 года назад
Will do
@martiniusetihw
@martiniusetihw 3 года назад
Mannnnnnn!!!!! You guys are the greatest!!! Thank you so much for the info. I will keep it all in mind! #T/ABROTHERHOOD
@martiniusetihw
@martiniusetihw 3 года назад
Oops, One more question. Have any of you guys lowered your car. I'm thinking about doing an inch all the way around. Are you having any trouble with speed bumps or any other clearances when taking off an inch from the ride height??
@benkalinowski5834
@benkalinowski5834 5 лет назад
I have a 88 GTA How much did you lower it in order to have to get that?
@TWAMotorsports
@TWAMotorsports 5 лет назад
Any amount of drop will move the rear end
@sprsprtrudy
@sprsprtrudy 5 лет назад
Any drop will move the axle center to one side. Lower you go more drastic the change. Lower it at all youll want an adjustable panhard.
@frankelizondo7262
@frankelizondo7262 3 года назад
How does ur rear tire not hit the fender? Did u role the inside of the fenders?
@TWAMotorsports
@TWAMotorsports 3 года назад
No hitting on the outside but 315 nittos generally run narrow.
@hotrodder5034
@hotrodder5034 4 года назад
I'm using non adjustable UMI version on my 95Z28.
@TWAMotorsports
@TWAMotorsports 4 года назад
That will stiffen but no adjustments
@hotrodder5034
@hotrodder5034 4 года назад
@@TWAMotorsports I also have their STB SFCs LCAs and adjustable torque arm. Looking to get their sway bar kit soon.
@TWAMotorsports
@TWAMotorsports 4 года назад
All that will make a huge difference
@hotrodder5034
@hotrodder5034 4 года назад
Thanks! It's a totally different car than when it was just a plain jane Z28.😊
@Isiah405
@Isiah405 3 года назад
I got a 94 trans am, and im getting tire rub on one side of the car really bad (passenger side). Would this help with the tire rub?
@TWAMotorsports
@TWAMotorsports 3 года назад
This will allow you to center the rear end.
@chemicalspore
@chemicalspore 6 лет назад
I installed these in my car and there is knocking on turns, bumps and getting out of the driveway. Any ideas why?
@TWAMotorsports
@TWAMotorsports 6 лет назад
4thGenDude02/BunkAssMechanic what brand and ends does it have?
@chemicalspore
@chemicalspore 6 лет назад
@@TWAMotorsports umi and polyurethane
@chemicalspore
@chemicalspore 6 лет назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KSJUN4_Gci4.html
@chemicalspore
@chemicalspore 5 лет назад
@@TWAMotorsports just to update you, the bolts were not tight enough. I tightened them down and it is quite
@TWAMotorsports
@TWAMotorsports 5 лет назад
@@chemicalspore good.
@Epro95
@Epro95 3 года назад
Do you need to put grease on the sides of the poly bushing or does the grease gun take care of that?
@TWAMotorsports
@TWAMotorsports 3 года назад
I generally do
@Epro95
@Epro95 3 года назад
@@TWAMotorsports I’ll take the bar off and grease it then.
@krisrawk1817
@krisrawk1817 3 года назад
What size rear tires are you running on your TA? What brand of tires are those i love the tread/design of those tires
@TWAMotorsports
@TWAMotorsports 3 года назад
315. All listed in the description of the video.
@krisrawk1817
@krisrawk1817 3 года назад
@@TWAMotorsports thanks man. Your car is gorgeous
@TWAMotorsports
@TWAMotorsports 3 года назад
Thank you
@billyshoemake9819
@billyshoemake9819 3 года назад
I replaced all my shocks and springs on the front and back but I didn't replace the rear control arms or the sway bar on the front and rear. Do you think after replacing all that my car will still feel like I'm hitting potholes when I hit little bumps
@TWAMotorsports
@TWAMotorsports 3 года назад
Yes. It could be the bushings are worn out
@nicholasblakstad7808
@nicholasblakstad7808 2 года назад
The sway bars on ls1 f bodies are actually nice peices unfortunately the mounting hardware is garbage energy suspension sells nice polly mounts for cheap
@TWAMotorsports
@TWAMotorsports 2 года назад
I agree
@mikewolf9892
@mikewolf9892 2 года назад
Is anyone else seeing the cracked frame above the adjustable rod end? might weld that up, looks like a crack.
@TWAMotorsports
@TWAMotorsports 2 года назад
Not cracked
@mikewolf9892
@mikewolf9892 2 года назад
@@TWAMotorsports good deal. the video was great!
@TWAMotorsports
@TWAMotorsports 2 года назад
Thank you
@boner6003
@boner6003 3 года назад
I’m about to drop my car with 1.50 inch lowering springs. Do I need this?
@TWAMotorsports
@TWAMotorsports 3 года назад
Generally yes you should
@boner6003
@boner6003 3 года назад
@@TWAMotorsports wow thanks for replying. Do you think I can get away with the non adjustable one? Adjusting it seems way out of my league
@TWAMotorsports
@TWAMotorsports 3 года назад
No it needs to be adjustable. It is not hard to adjust. Just need tape and a string
@boner6003
@boner6003 3 года назад
@@TWAMotorsports well I know what I’m ordering now. I’ll let you know how it goes when I do it... thanks for replying on this 2 year old video by the way
@TWAMotorsports
@TWAMotorsports 3 года назад
You're welcome. If you can lower one the panhard rod is just as easy if not easier
@rodriguezandres54
@rodriguezandres54 Год назад
What’s that lil hose u use to put grease with?
@TWAMotorsports
@TWAMotorsports Год назад
Grease gun
@rodriguezandres54
@rodriguezandres54 Год назад
@@TWAMotorsports thanks
@TWAMotorsports
@TWAMotorsports Год назад
You're welcome
@chrissimonmagana
@chrissimonmagana 4 года назад
Hey boss by any chance have you change your stearing wheel and what adapter does it need thnk u
@TWAMotorsports
@TWAMotorsports 4 года назад
I haven't done that so I'm not much help.
@chrissimonmagana
@chrissimonmagana 4 года назад
@@TWAMotorsports itss ok thnkx thoe anthor one maybe u will know this I just got this wierd noise on my enegine maybe I can get the help from u by any chance do u know ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bM-amOdGEjw.html
@TWAMotorsports
@TWAMotorsports 4 года назад
@@chrissimonmagana sounds like a lifter.
@chrissimonmagana
@chrissimonmagana 4 года назад
@@TWAMotorsports thnkx men it end up beeing a header leak
@TWAMotorsports
@TWAMotorsports 4 года назад
@@chrissimonmagana that's not a bad fix.
@garyking9496
@garyking9496 4 года назад
What size tire do you have on the rear end. And what offsets is the rim ?
@TWAMotorsports
@TWAMotorsports 4 года назад
17x11 7.75bs. I made a video on that too
@garyking9496
@garyking9496 4 года назад
@@TWAMotorsports I'm sorry I meant like a 295 50 17 or like a 305 45 17 I'm doing a 95 formula and was going to narrow the rear end but don't want to get that deep with it
@garyking9496
@garyking9496 4 года назад
@@TWAMotorsports where can I find the tire video at
@TWAMotorsports
@TWAMotorsports 4 года назад
@@garyking9496 if you search my channel it was a few videos before this one.
@garyking9496
@garyking9496 4 года назад
Ok thanks
@pimprus8290
@pimprus8290 Год назад
Woul I have to center my rear if I use boxed instead
@TWAMotorsports
@TWAMotorsports Год назад
No
@pimprus8290
@pimprus8290 Год назад
@@TWAMotorsports my rear need to b centered my first time it’s my passenger rear would u b able to help with what way to turn the middle
@TWAMotorsports
@TWAMotorsports Год назад
If it isn't adjustable it can't be adjusted
@pimprus8290
@pimprus8290 Год назад
@@TWAMotorsports I have the red bar with two grease ends it’s adjustable just don’t know witch way is for passenger
@TWAMotorsports
@TWAMotorsports Год назад
If it adjusts in the middle it shorten or lengthens.
@jayeatyou323
@jayeatyou323 5 лет назад
subscribe..😁
@TWAMotorsports
@TWAMotorsports 5 лет назад
Thank you Jesse👍
@408cisleepr8
@408cisleepr8 4 года назад
What part of mo you from?
@TWAMotorsports
@TWAMotorsports 4 года назад
SW Missouri. Springfield area
@408cisleepr8
@408cisleepr8 4 года назад
Cool I’m not 2 far from you 30 mins south of stl
@TWAMotorsports
@TWAMotorsports 4 года назад
@@408cisleepr8 yeah that's close. I'm about 4 hours from st Louis
@408cisleepr8
@408cisleepr8 4 года назад
TWA Motorsports my car is currently apart All Midwest chassis under it qp 9 Viking coilovers ect Front half coming up next Upper / lower control arms tubular k member front coilovers
@TWAMotorsports
@TWAMotorsports 4 года назад
@@408cisleepr8 very nice stuff.
Далее
WS6 Trans Am gets new brakes and WOW!!
25:13
Просмотров 35 тыс.
World’s Tallest Man VS Shortest Woman!
15:07
Просмотров 15 млн
How does a Panhard Bar Work?
11:06
Просмотров 13 тыс.
Tech Install: HEIDTS IRS for Fourth-Gen F-bodies
7:47
How to Lower Camaro Trans Am and Firebird.
29:24
Просмотров 37 тыс.
Installing 2nd Set of Headers on my WS6
15:42
Просмотров 37 тыс.
How to Hide wires Trans Am WS6 Camaro Firebird
9:44
Просмотров 30 тыс.
Make Your Fourth Gen Fast With Corner Max!
6:21
Просмотров 57 тыс.
How To Set Up A Panhard Bar
4:14
Просмотров 447 тыс.