How to change a flat tire or tube on an electric bike with hub motor 

Skipped past the most important part of the video where the wheel is actually removed lol

Very good, step-by-step tutorial! Thanks!

Couldn’t see a thing when you was removing the brake disc, so I missed which screws to remove, the only thing I needed to know and the most important part.

Mark, Please remember to eliminate background ambient sounds before making a video from .4:29 We can't hear your voice due to industrial noise. Thanks.🚴

How did you remove the wheel

Did you check the outer tyre to see if there was a nail in it? If not you may be changing the tube again….

*Works great my **Latest.Bike** I have a bad knee so I still get exercise but the bike assists me. I am a big guy so I didn’t think it would go as fast but it works great.*

This is my bike being worked on in the video lol

Thanks for the video. I suggest inflating tube after installing to get the wrinkles out, then deflating, install the core and inflate. Also install a piece of bent cardboard in the brake caliper to keep it from closing!

Why didnt you include taking the tire off the rim? Thats literally the hardest part

I live in Austin TX how much would i cost to bring my ebike up there

Skipping past the entire part of how to take the wheel AND tire off makes this video frustrating and only partially useful. Thank you for what you did show, but it's incomplete.

Is there a place where i can send my ebike rear wheel to be rewired ? The wires is in the Axle and the Axle is broke but the but the bike still rides smooth but just not the electric ??

Newbie here. I was so happy to see this video pop up. And then you left me hanging. It is useless to do a how to video if you are going to remove the caliper without a close up, then cut to a shot with the tire already removed. You are not making this for us newbies. You made this for someone already knowing how to change a bike tire. Gave it a thumbs down in frustration.

Thank you! you helped me alot guys/

Good advice. But PLEASE when shooting video with a phone: ALWAYS USE THE PHONE HORIZONTALLY!

Why can I not tighten up the hub on the power side of the hub after I change the tube, when I do the hub will not turn?

What if you have a cable that goes into back wheel where bolt is.....I can't find any plug to disconnect from motor?

WHY would you skip the removal process???? WHY????

Hey guys. There doesn't seem to be a plug in my bike. The wire seems to go straight to the battery pack. I'm in the process of opening up the back but the screws are stripped. Any suggestions?

Thank u so much bless u my brother 🤗

How do you get the chain assembly of without screwing it up you skipped that part so this video is useles

Nice video. While I understand removal of the wheel for inner tube replacement, why would you remove the wheel to repair a puncture?

Make sure to remove the battery first before doing any maintenance to an ebike.

Fixed many flats and have never had to remove the brake caliper! You are just setting up other problems. The loosened wheel will just drop out and easily go back in.

I just wanted to say thank you. The manual that came with the ebike did not show this.

I do not recommend touching the disc brakes unless you know how to align it again.

THANKS from INDIA

My eBike doesn't have the middle connector in the line to the motor

Didn’t even show the wheel removal!

The bike shown in the video is the one I own, an Extreme Scooters XB300-Li Trail Maker. The video covers the process well, and gave me the info I needed to change both tires on my bike in a little over an hour ... saving me about $100 of fees from the bike shop (not mention the two weeks' wait I'd have had to get the bike back). THANK YOU!

Can you believe these knuckleheads didn't have a disconnect on the power cable going to my hub.. it's one long cable I'm screwed if I need to replace the rear tire😩

Eye agree

Didn't show how disconnect the disc brake so best take it to shop

had a curb crash, am using an electric Ancheer folding bike. was very dark, my roads traffic lights do not signal for bikes unless a car is on the road because of weight limit of traffic lights so I was forced to use a sidewalk(which is not a bike trail) we live in a hick town, the cycle came on a low part of a curb that I thought was a clear ramp was only a lower curb, no clear ramp on that particular street. anyway, the front tire(not to do directly with video topic) hit going at around 10 mph. I don't know what tube to use on an Ancheer electric folding bike this one, www.amazon.com/ANCHEER-Lightweight-Integrated-Lithium-Ion-Suspension/dp/B01MUAG7U5 can't find much info on this and no one will tell me. I don't even know if I should just replace the whole mag wheel/tire assemby not just the tube. it hit pretty hard, but it only damaged the air valve stem(tangibly) I don't know what intangible damage was done. I don't know which tube to use on this bike, I do know the stem is rubber, that is why the thing got flat.

Wow.. skipped part how to take tube out

you dont have to take the brake caliper off lol

Wow, you skipped actually removing the wheel. Nice.

(Gnashing of teeth) This video has the same problem as all the other ones I have seen so far. My bike has no plug in the electric cable between the wheel and the controller. That's what I need to solve.

Good video up to 2:46 then pointless

I am here because my electric bike tire is flat.

Lol 2:04

Can you speak a bit louder guys OR switch off the bloody background noise!

This is not TUTORIAL. Its a video which shows something like removing a tire. You skipped the whole details of even how to remove the tire.. Its thumbs down

sorry but next video maybe speak a little closer to the mic, can barely hear you

If you are going to make a video....and least have the correct tools,... if you use that contraption of allen wrenches... you are not professional....

This video needs to be deleted and redone with complete instructions.

kenvitatoe RU-vid E bike