No video :(

How To Change a Hayward Pump Seal / Hayward Pool Pump Seal Leaking?

Подписаться 27 тыс.

Просмотров 42 тыс.

50% 1

How To Change a Hayward Pump Seal
A swimming pool pump shaft seal prevents water from leaking along the pump motor shaft. Even the most expensive pool pump has its pump shaft seal fail at some point. As a result, you will see water running down the backside of the pool pump or between the motor and wet head. A leaking Hayward swimming pool pump seal can cause damage to the pool pump motor and also cause loss of pressure in the pool water lines.
❤ SUBSCRIBE - www.youtube.co...
🎁TIP JAR - PAYPAL: paypal.me/vipp...
-------------PAID LINKS BELOW-----------------------------------
✔ Hayward Super Pump Seal Kit
amzn.to/37tpin0 CANADA
amzn.to/3xADbdA USA
✔ Hayward Super Pump Impeller
3/4 HP - amzn.to/3JV2wBN CANADA
1 HP - amzn.to/3Eyk1Xu CANADA
1.5HP - amzn.to/3JViegb CANADA
NOTE: Check ID on the impeller
✔ Pool Pump Bearing Puller:
amzn.to/3OxcY63 CANADA
amzn.to/391zgMQ USA
✔ Volts and Amps Tester
amzn.to/37qsKyA CANADA
amzn.to/3Mej4Gl USA
✔ Pool and Hot Tub Wrench
amzn.to/3KWmdKI CANADA
amzn.to/3vtslDv USA
✔ Pool O-Ring Lube
amzn.to/3Eq40mq CANADA
amzn.to/3KVn2Du USA
✔ Pool and Hot Tub Silicone
amzn.to/3JTkCnA CANADA
amzn.to/3uRwj9V USA
❤ FACEBOOK - / vippoolandspa
😎 Join this channel to get access to perks:
/ @vippoolsandspas

Опубликовано:

19 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@VIPPoolsandSpas 3 года назад

Follow the video close and you'll see tricks on how the professionals install a pump seal.

@bradsnapp8437 3 года назад

I thought you weren't suppose to touch or put any type of lube other than water or water based lubes on the seals.

@VIPPoolsandSpas 3 года назад

@@bradsnapp8437 it's ok. Never had any issues. We are talking about the silicone right? If so, get the stuff I suggest because that's the stuff I've used for years with no problems and no call backs because it leaked again. I would say that doing it this way will make your seal last longer.

@jimbosander 3 года назад

How critical is it to NOT touch the ceramic sides with bare hands? The pool shop advised wearing gloves although, I can't imagine it's THAT sensitive, but probably not a bad idea either?

@VIPPoolsandSpas 3 года назад

@@jimbosander no big deal

@johnnoakes9576 Год назад

Great video brother. It was exactly what I needed to get my pump motor gaskets on! Thank you and God bless.

@VIPPoolsandSpas Год назад

Thanks for watching.

@keithguay7523 Год назад

Thank God you ended up taking that rubber piece off or I was heading to fix a pump again… Lol Thanks man great video!!! 💪

@VIPPoolsandSpas Год назад

Thanks for watching. Give the video a LIKE

@keithguay7523 Год назад

@@VIPPoolsandSpas already did!

@chriscatalan9995 3 месяца назад

Awesome video ! very easy instructions. Would you happen to know a part number for the seal kit you installed? Or any suggestions of where I should look to find one

@VIPPoolsandSpas 3 месяца назад

Is there a link in the video description?

@Backfire10 2 года назад

Also, you are not supposed to touch the ceramic part (white part) of the seal; so they say. Oils from your hands contaminate the seal. Nice Video.

@VIPPoolsandSpas 2 года назад

its all fine. never hand an issue.

@yamaha-rb9tk Год назад

Correct, never get any contamination on the seal face. Can clean with denatured alcohol if it does get dirty.

@jeromecholewa8651 Год назад

Great video! I had been looking for exactly that! Do you have a video explaining what the flinger seal on the motor side does and how to replace it?

@VIPPoolsandSpas Год назад

A V-ring or flinger protects the shaft bearing by blocking dust and other contaminants. On the hot tub or pool pumps it's just a rubber piece and can be made. Again, its just to block crap from getting too the bearing.

@gonzalomadero9848 2 года назад

Excellent video, very instructive. Thank you.

@VIPPoolsandSpas 2 года назад

Glad it was helpful!

@jamesbradford1815 Год назад

I had a new variable Hayward pump installed as part of a my pool build. The unit began to leak within 4 weeks. The pump was replaced with a new unit as it was under full warranty. The second pump failed within 48 hrs, again pointing to a shaft seal leak as the source of failure. This time the seal was replaced. Within 24 hrs, this fix also failed with water pooling on the floor. Now the Hayward Regional rep is going to take a look at the issue…..hmm quality control I believe is the issue.

@VIPPoolsandSpas Год назад

I'm guessing you have a salt water pool? Putting the right seal in a pump is key and the silicone helps a lot.

@jamesbradford1815 Год назад

Salt unit has not been turned on, as we are just running the pump to circulate water during winter. Three failures points to issues with seal installation at the factory. The Regional Hayward rep will be here tomorrow….I am expecting a new pump at Hayward’s cost/expense.

@VIPPoolsandSpas Год назад

@@jamesbradford1815find a video for your pump that shows changing a seal. Also. Get a seal or 2 for backup. Warranty won't always cover it.

@jamesbradford1815 Год назад

Hayward Rep came out on site and indicated they had a production issue resulting in seal failures. The original pump installed Oct 2022 and replacement Dec 2022 were of sequential serial numbers…and were back to back production units. The Rep authorized a third pump, from a different production run, which will be installed tomorrow…so I am keeping my fingers crossed.

@jamesbradford1815 Год назад

I spoke too early. Third pump failed in 48 hrs. There is a production issue here.

@pippycat9915 2 года назад

Why is the motor sideways?

@VIPPoolsandSpas 2 года назад

lol. Nice caught. It was a customers pump and he turned it sideways for his situation in the pump house. You put it back together the way you take it apart.