How to change Camaro SS 1LE Brembo 6 piston brake pads

Подписаться 7 тыс.

Просмотров 12 тыс.

50% 1

In this video we show you how to diy and change the brake pads on the 2018 Chevrolet Camaro SS 1LE with 6 piston brembo brakes and brake pads. It’s very very simple. On my particular camaro I have nearly 50k miles and still had pads left but since we are going to the track we must take this necessary measure.
Let’s connect on ig: @phaze_1l (camaro) and @mrpha2e for the MR2 :)

Авто/Мото

Опубликовано:

25 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@N0LYF3 2 года назад

good visuals here of showing how the works done.

@g3orge7309 3 года назад

Great video brother 👌🏻

@Dunkaroos248 3 года назад

I recommend anyone watching this attach a bleeder hose and bottle to each side’s bleed nipple and crack it open when compressing the pistons. This will make it easier to compress the pistons as well as collect the brake fluid instead of pushing it back through the brake system and risk blowing a seal. You can then Top off the reservoir with fresh DOT 3.

@Infinite.phases 3 года назад

Thank you for the tip. ✌🏻

@KalebH-ih8ik 8 месяцев назад

I do this same thing, however make sure you know what you are running the 6th gen 1LEs are usually upgraded to DOT4

@13hasaan 2 года назад

Thanks for the video !!

@Infinite.phases 2 года назад

You’re welcome. Thanks for watching and commenting.

@TheDeviusPiper 3 года назад

Nice 1LE, I absolutely love mine! Did you have to watch the brake fluid level while compressing the calipers back?

@iamkhan9661 3 года назад

👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

@mansooruddinahmed128 11 месяцев назад

Can you discuss whether it is necessary to bleed/flush brakes with every pad/rotor change? I came back from a track day with my brake pedal feel super long and the sound of scraping in my brakes. Wondering if i have to do all three, change pads, rotors, flush. THanks,

@Infinite.phases 11 месяцев назад

Your pedal feels long because your brake pads are worn down from track use. Therefore there is more play in brake cylinder/pedal. If you look at your fluid it’s probably lower too right? Because the brake cylinder is pressed in due to worn pad. Change the pad and you’ll see pedal correct itself. If fluid is dirty change it. If it has air bleed it.