How to change front brake discs and front brake pads on NISSAN QASHQAI 1 TUTORIAL | AUTODOC

autodoc.co.uk

Подписаться 393 тыс.

Просмотров 52 тыс.

50% 1

How to change Front brake discs / Front brake rotors / Front Disc Brakes / Front brake pads on NISSAN QASHQAI 1 TUTORIAL | AUTODOC
Top brands that produce brake discs and brake pads: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
On our website you will find a wide range of auto parts you are interested in: goo.gl/QHzl1j
Brake discs: goo.gl/77jsRT
Brake discs for NISSAN: goo.gl/7zM8aR
Brake discs for NISSAN QASHQAI: goo.gl/30RtPr
Brake pads: goo.gl/SbESD7
Brake pads for NISSAN: goo.gl/pyvj4p
Brake pads for NISSAN QASHQAI: goo.gl/IvNtx4
NISSAN Car parts: goo.gl/faKNxl
Mobile Shop: m.autodoc.co.uk
► How to replace an engine air filter on NISSAN QASHQAI 1 - • How to change Air Filt...
► How to replace a steering knuckle tie rod end on NISSAN QASHQAI 1 - • How to change tie rod ...
► How to replace front stabilizer links on NISSAN QASHQAI 1 - • How to change Front An...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
RU-vid: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...

Опубликовано:

7 июн 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@milanzivanic5767 5 лет назад

Great. That's easy and understandable way to explain. Thx. Just two tips for those who never done it before. Drain brake liquid a bit (it's on the left hand side under the bonnet behind engine) and clean/polish the desk as much as u can (place where new disc is sitting in). Thx for this clip mate

@autodocuk 5 лет назад

Thank you for your feedback ! We appreciate your nice comment and valuable remark, it will be very useful for our viewers. Best regards, Autodoc.

@simoneshadow 7 лет назад

thank you very much, It was very helpful

@autodocuk 7 лет назад

Thank you for the feedback! We are glad that our tutorial was useful for you. Best regards, Autodoc.

@ArmyVeteranUK 6 лет назад

Great instructional video thanks for putting this up, bit of common sense required for torque settings and anti seize paste.thanks again

@autodocuk 6 лет назад

Thank you for the feedback! We are grateful that you appreciate our media! To see more interesting content stay tuned. Best Regards, Autodoc.

@kibardinazor2087 2 года назад

Good explanation. Good music. Thank you my friend. You are the best in RU-vid 👍👍👍

@autodocuk 2 года назад

Thanks for your positive comment! Stay with us! AUTODOC

@jesuerodriguez5085 7 лет назад

A lot of thanks!! Now I can do it by myself

@autodocuk 7 лет назад

Thank you for the feedback! We are glad that our tutorial was useful for you. Best regards, Autodoc.

@juandef4115 3 года назад

correct. but void the warranty if anything does go wrong

@tareqbader4758 6 лет назад

Many thanks for the v. clip . Should i polish desk in every change break pad .

@autodocuk 6 лет назад

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

@LauDuKai 7 лет назад

Great Video, but what torque setting did you use on the calipers?

@autodocuk 7 лет назад

Thank you for the feedback! All torque specs are indicated in the technical documentation on the vehicle maintenance, you can find them out at the official car dealer. Best regards, Autodoc.

@dodgygeezah4707 6 лет назад

Great, thanks. Out of curiosity, why no anti seize grease on hub before fitting new disc??

@autodocuk 6 лет назад

Thank you for the feedback! This video is considered to be an informative one, and it shows the sequence of repairs, so some stages of the repairs might have been excluded. Best regards, Autodoc.

@onehans66 5 лет назад

copper grease is not needed. that aint car from 1970

@ssss-df5qz 3 года назад

@@onehans66 you still need grease though - we just use synthetic grease for the pad mounts. I assume you meant "copper slip is not needed on the back of the pad" - yes, while that might be true, you still need to properly lubricate the pad mounts and sliders (sliders with silicone grease). I do hope you haven't fitted brakes for anyone....

@onehans66 3 года назад

@@ssss-df5qz all good on my car. Had a chat with MOT center guy. It's fine

@tristaylor5492 Год назад

Grease / replacement of the sliders would be nice. The newest are 10 years old now. Torque specs are really required on something so crucial.

@autodocuk Год назад

We are sure that your comment will be useful for many of our viewers.

@thebigpupster 4 года назад

just out of interest.......wheres the brake wear indicator? i just ordered new pads for my qashqai and they never came with the little wear indicator clips? i thought they always came with them? any help would be appreciated before i fit these

@autodocuk 4 года назад

Thank you for your comment! The Brake pad wear sensors are always purchasing separately. Best Regards, Autodoc team

@taxalterror 6 лет назад

Yes helpful , but no re tightening on the bolts (torques) relying on impact wrench :(

@autodocuk 6 лет назад

Thank you for the feedback! All torque specs are indicated in the technical documentation on the vehicle maintenance, you can find them out at the official car dealer. Best regards, Autodoc.

@ssss-df5qz 3 года назад

Caliper carrier - FT (fucking tight) Slider bolts - just a bit more than a nip with some threadlock

@Dzacu4 3 года назад

what disc size is it?

@autodocuk 3 года назад

Thank you for your comment! The front brake disc diameter on this vehicle is 296 mm. Best Regards, Autodoc team

@pedroitalianstallion 4 года назад

should have used copper grease on the back and the edge of the pads and didn't check brake level before pushing piston back in ' Tut, Tut.

@autodocuk 4 года назад

Thank you for the valuable clarification. We will take this into account in the following videos. Best regards, Autodoc team.

@deanchambers2853 4 года назад

didnt grease up the sliders. there the first thing to seize

@autodocuk 4 года назад

Thank you for the valuable recommendation. Best Regards, Autodoc team.

@73dazman 2 года назад

Not 1 bit of grease or cleaned the carriers up ...

@autodocuk 2 года назад

Hi! Before replacing, it is recommended to lubricate the guides and clean the elements of the brake system from dirt, rust and dust.

@ssss-df5qz 3 года назад

Only an amateur grabs alloys by the spokes to remove the wheel - he must not like his fingers much....

@fargogemini694 6 лет назад

Terrible you didn’t show or Tel to pump the brake pedal before driving off and torque settings for callipers and road wheels,

@autodocuk 6 лет назад

Thank you for the feedback! This video is considered to be an informative one, and it shows the sequence of repairs, so some stages of the repairs might have been excluded. Best regards, Autodoc.

@deanchambers2853 4 года назад

ft on everything