Тёмный

How to change front springs / front coil springs on VW POLO 4 (9N) [TUTORIAL AUTODOC] 

autodoc.co.uk
Подписаться 392 тыс.
Просмотров 23 тыс.
50% 1

How to change front springs / front coil springs / front suspension springs on VW POLO 4 (9N) 1.4 Hatchback 10.2001-01.2012 [TUTORIAL AUTODOC]
Springs on SEAT Córdoba II Saloon (6L2) (09.2002 - 11.2009) / SEAT Ibiza III Hatchback (6L1) (02.2002 - 11.2009) / SKODA Fabia I Hatchback (6Y2) (08.1999 - 03.2008) / VW Fox Hatchback (5Z1, 5Z3, 5Z4) (04.2005 - ...) / SKODA Roomster (5J) (03.2006 - 05.2015) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce springs: KYB, LESJÖFORS, STARK, MONROE, RIDEX.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Springs: www.autodoc.co.uk/car-parts/c...
Springs for VW POLO 4: www.autodoc.co.uk/car-parts/c...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
LIQUI MOLY Fast Cleaner: www.autodoc.co.uk/liqui-moly/...
All video and pdf tutorials on VW POLO 4 parts replacement: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/vw...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ ru-vid.com?s...
🛠️ The tools you need to replace front springs:
- wire brush
- WD-40 spray
- brake cleaner
- copper grease
- drive socket No.12
- drive socket No.13
- drive socket No.16
- drive socket No.18
- drive socket No.21
- XZN socket bit №12
- 12-point socket №30
- HEX bit No.H6
- shock absorber socket
- wheel impact socket №17
- ratchet wrench
- torque wrench
- pin punch
- tap wrench
- hammer
- hydraulic strut spring compressor
- hydraulic transmission jack
- fender cover
- wheel chock
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► VW car repair tutorial - • VW car repair tutorial...
► VW POLO 4 car repair tutorial - • VW POLO 4 car repair t...
► How to replace front suspension arm / front control arm on VW POLO 4 (9N) - • How to change front su...
► How to replace a front shock strut on VW POLO 4 (9N) - • How to change a front ...
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
RU-vid: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2019 AUTODOC GmbH All rights reserved

Авто/Мото

Опубликовано:

 

27 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 17   
@autodocuk
@autodocuk Год назад
Attention! This video contains mistakes: 7:17 - the tightening torque is 60 Nm, not 105 Nm. 7:23 - the tightening torque is 20 Nm, not 52 Nm. 8:01 - the tightening torque is 40 Nm, not 60 Nm. 8:51 - the tightening torque is 15 Nm, not 45 Nm. 9:09 - the tightening torque is 50 Nm, not 165 Nm. We're sorry for the inconvenience 🙇‍♂
@ballybunnionbhoy
@ballybunnionbhoy 3 года назад
Check from 6.50 to 6.59 on video, the boot on the lower hub ball joint from track control arm is split.
@simonsheppard9269
@simonsheppard9269 2 года назад
its a 36mm 12 point socket to remove the driveshaft bolt
@Equilibrium_Rewind
@Equilibrium_Rewind 5 месяцев назад
Correct. Front - 36mm / Rear - 30mm
@ivarsmatisons
@ivarsmatisons 3 года назад
Paldies par informaciju!
@alexey9900
@alexey9900 4 года назад
Good 👍👍👍
@LG-kl3co
@LG-kl3co Год назад
I notice the dust cover is split on the lower ball joint !
@RA30st08
@RA30st08 4 года назад
I don't understand the copper spray after bolts are tighten down. Surely you should apply to threads first...
@27walker27
@27walker27 3 года назад
Is that 12 point socket just a standard 12point socket? And is it a 30mm or 36?
@autodocuk
@autodocuk 3 года назад
Thank you for your comment. Unfortunately, we do not have such information. Best Regards, Autodoc team
@i983jonlock
@i983jonlock 4 года назад
You should note that the driveshafts nut should not be reused and should be replaced, it’s a single use nut!!!!
@autodocuk
@autodocuk 4 года назад
Thank you for your comment. In new videos, we will definitely add this information to our viewers. Best Regards, Autodoc Team!
@vkjnrokis
@vkjnrokis 3 года назад
Xzn bit should be m14 not m12
@autodocuk
@autodocuk 3 года назад
Thank you for the valuable clarification, this will be very useful information for our viewers. Best Regards, Autodoc team
@Equilibrium_Rewind
@Equilibrium_Rewind 5 месяцев назад
If you don't have xzn bit you can use torx bit. It fits in the grooves perfectly.
@fluffy290386
@fluffy290386 5 месяцев назад
can you for the love of god remove music in your videos. thanks
@fluffy290386
@fluffy290386 5 месяцев назад
poor design by vw same on bmw so many things to take apart just for spring, volvos and japanese cars have much better design, you are done with the job before you even get started on this job.
Далее
VW POLO 4 Stoßdämpfer vorne wechseln | Tutorial HD
15:02
РУБИН - ЗЕНИТ: ВСЕ ГОЛЫ
01:03
Просмотров 162 тыс.
Volkswagen Polo 9N Spring and Top Mount Change
20:59
Просмотров 4,9 тыс.
Changer les Amortisseurs avant Polo 4 ➿
11:08
Просмотров 4,3 тыс.
BMW M5 VS COBALT  QANCHAGA TUSHDI 😱💣
0:17
Просмотров 586 тыс.
Суперкар DS на 1400 л.с.
0:46
Просмотров 1,3 млн
Суперкар DS на 1400 л.с.
0:46
Просмотров 1,3 млн