How to Change Motorcycle Coolant Antifreeze: Kawasaki Vulcan S 650 

Why isn't this channel bigger? Good info & easily understood! New sub. Thanks for helping me out! 👍😎🏍

Did my first coolant change on my Vulcan following this video, no issues. Can’t thank you enough for taking the time to make it. Really appreciate it.

Great tutorial, covering everything.

thanks, very helpful.

Thank you so much for the demonstration. Thank you for going over all the items and steps required. Also the puppy is really cute. Thank you again!

when you take off the expansion tank cover (3:23) by removing the two bolts, the inner bolt has a 'U' clip nut, and on my Vulcan, it fell off when the bolt was undone, so take care not to lose that. The other bolt came out fine, but it wouldn't go back in, because the plastic tank hole wasn't aligned with the captive nut. No matter how much I pushed the plastic tank, that hole just wouldn't realign properly to allow the bolt thread to start. A real pain as the other bolt holding the expansion tank in place is only accessible after dismantling and removing the outer metalwork. If it won't align when I release the tank, I'll probably enlarge the hole on a drill press. A bit tedious really and something which should be straightforward isn't. :(

Good video, professional job. Thanks Bill

Thanks! It’s helped a lot👍✌️

I have the same motorcycle and this helps immensely thanks great tutorial

Thanks for the vid going to try it on my Vulcan s very helpful,it’s nice to do it yourself, Dean from Ireland

sono riuscito perfettamente a cambiare il liquido grazie al tuo video! Fanne altri per vulcan s

Great video. I follow your steps to change the fluid in my Vulcan S. I will do a video as well to show that your steps work great. But I will shoot it in Spanish for the Spanish speaking world ;-) thanks again foe the time to do the video.

exactly how I like my tutorials, simple, easy to follow steps. from Canada, will try my hand very soon as the coolant on my baby looks pretty darn yucky.

Obrigado👏👏👍👍

Cool shirt!

Nice video dude I just bought this bike so thanks for the tips do you have a video on how to change the gas tank

Good video but your pup guaranteed the like. #19

When pouring distilled water alone do we need to keep both drains open, i mean including the reservoir pipe also? Or only let it flow through the right hand side bolt?

3:03 Did you have any problems getting that hex bolt out? On mine it's free-turning and not loosening at all

On minute 7:40 in the video, how many minutes you stay with the bike on?

Shouldn't the Vulcan be upright instead of on the side kick?

Thanks for the tip about flushing out the radiator coolant system. There's ALWAYS residue from before left in the system and that could lead to a failure in the operation of the engine-not good and expensive to fix!😱 doug

how much litre is your coolant