How to Change oil and coolant on Audi RS5 & RS4 4.2L V8 CFSA (B8)

Подписаться 1,3 тыс.

Просмотров 6 тыс.

50% 1

Full step by step including toque values and bleeding air out of the cooling system. Save $$$ by doing it yourself. Links to chapters below to jump to the interesting parts. Links to tools and parts used below.
0:00 What are we doing? Failing to launch for a start!
0:57 Jacking points
7:05 Undertray removal
14:29 Oil change
16:35 Oil filter change
22:23 Wet launch attempt
24:26 Oil drain bolt torque (sump bolt) & fill
25:22 Changing the coolant
25:37 Coolant drain location(s)
27:08 Vacuum filling the cooling system
31:08 Setting the coolant level
32:20 Leak check
33:54 Undertray bolt location and type
34:25 Wrap up and thank you!
34:36 End credits
#Audi #RS5 #DIY
FOLLOW ME!
Facebook - / findingseconds
Twitter - / findingseconds
Instagram - / findseconds
Subscribe: ru-vid.com?su...
Links
--------
Triple square bits: www.shopdap.com/triple-square...
Wheel cleaner: www.meguiars.com/automotive/p...
OEM Screw kit: www.ecstuning.com/b-genuine-v...
Oil: www.ecstuning.com/b-genuine-v...
Oil filter: www.ecstuning.com/b-genuine-v...
Oil drain gasket: www.ecstuning.com/b-genuine-v...
OEM tools oil funnel 87024: www.amazon.com/gp/product/B07...
Coolant air purge tool: www.ecstuning.com/b-schwaben-...
Mityvac: www.skf.com/mityvac/products/...
Johnson County KS Qless (Mission/Olathe only): www.jocogov.org/department/tr...
Stephan Reil @ Sonoma: • Stephan Reil in the 20...
Stephan Reil: www.audi-mediacenter.com/en/b...
www.findingseconds.com/semi-s...

Авто/Мото

Опубликовано:

31 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@charlatan74 25 дней назад

Thank you for providing a list/links for parts.

@FindingSeconds 19 дней назад

You’re welcome!

@salmonfilet 3 месяца назад

Such a great video with so much detail. Thank you!

@FindingSeconds 3 месяца назад

Glad it was helpful!

@bjj5746 Год назад

Thanks for sharing this. I wasn't sure how to even access the oil pan. I was underneath the car for the cross brace install on my 14 RS5 and saw all those screws and said there's no way! And holy moly those are a lot of screws to remove to get to the oil pan bolt.

@FindingSeconds Год назад

You and me both! The day I picked it up from Carvana I drove it straight to the workshop to go through it with a fine tooth comb. It was a long night but I learnt a lot :) Thank you for watching!

@elate.scotland 6 месяцев назад

Great video

@FindingSeconds 6 месяцев назад

Thanks!

@alvinesteban9666 7 месяцев назад

Happy new bro this video helps me to how to change oil transmision

@FindingSeconds 7 месяцев назад

Glad it helped!

@TheeShaquilleOatmealGames Год назад

I was only able to get the black plug loose to drain the fluid. The first plug was stripped and I didn't have an extra. I did 2 flushes and let it drain for a good amount of time. Should I be okay with the new coolant or should I get a new coolant pipe plug and do another flush?

@FindingSeconds Год назад

The coolant system is under pressure and I would personally always replace anything that was stripped or leaking. If you didn't remove the plug on the coolant pipe (and it is still sealed) it just means there is a chance you didn't get as much of the old coolant out as possible. Not the end of the world as there is always a little left. Sounds like you did 2 flushes though so you could be good. Just make sure when the engine is fully up to temperature that there aren't any leaks!

@TheeShaquilleOatmealGames Год назад

@@FindingSeconds this helped out so much. Thank you!

@Dyno793 3 месяца назад

What would happen if you needed to top the coolant up but didn’t have that machine ?

@FindingSeconds 3 месяца назад

As long as it is only a top up you are fine. If the overflow tank is empty, you might get an air bubble. Either way the cooling system is a sealed system. You’ll need to hunt down why you are low. These cars are prone to oil and coolant leaks. Don’t let things drag on as it will get expensive!

@sweaty2701 Год назад

Does this work on Audi s5

@FindingSeconds Год назад

Yes if you have a B8 with the 7-speed S-Tronic dual clutch transmission. I’ve got a B8 S4 and a B8.5 S4 DSG cars too and the process is the same. The only minor difference on the B8 S4 is that it had no external filter.