Thanks for telling us the torque spec for the plugs! One of the firtst vids I've seen where that critical info was shared. Gonna be some sad bois if you break off a spark plug in there.....don't over tighten folks!
Nice video quick install. The standard spark plug gap for the Nismo 370z is 1.1mm/0.043 thousands of an inch. The limit is 1.3/0.051. if your gap was 0.041 thousands of an inch, that's pretty close and would not cause any problems. Keep up the good work Jack!
Oem GTR spark plugs gapped to 0.030 for NA application recommended by my tuner. The plugs have 2 prongs so just be very careful and take your time when gapping.
Thanks for the video changing out the sparkplugs for my g35 later today or tomorrow. I got a random misfire and a rich condition in bank 1. Hopefully its the sparkplugs, because the coils still are working, but if it isn't I am thinking it could be a fuel injector on bank 1 side and or valve cover gasket (bit of oil on sparkplug cylinder #5, but nothing crazy).
Not one shot of how to get to the back ones which are the difficult ones. Just straight to "all done, k thx bye". How can I replicate what I just saw here when you've not shown the rears?
Just use a torque wrench and set it to 14ft lbs. If you cant get one just hand tighten them as hard as you can and then do a quarter turn with your ratchet.
yeah if you try to gap them with the coin gaping tool you could damage the tip. but good thing that these plugs are already pregapped so you dont have to worry about it. just dont drop them lol.
@@jakesscc9184 I got mine oem from Nissan dealership I get paranoid should I check the gap and make sure they are at the correct gap or should I just assume they’re all gapped correctly
