How to Change Your Spare Tire 98-12 Ford Ranger

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,5 млн

Просмотров 109 тыс.

50% 1

For More Info visit us at: 1aau.to/h/Sm/
In the video, 1A Auto shows how to jack up and support your vehicle. The video is applicable to the 01 Ford Ranger
This process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger
🔧 List of tools used:
• Block of Wood
Subscribe: / @1aauto
Check out our playlist:
Ford Ranger 1998-2012 3rd Gen: • Ford Ranger 1998-2011 ...
Ford Auto Repair Videos: • Ford Auto Repair Videos
For More Info visit us at 1aau.to/h/Sm/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

7 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 78

@1AAuto 4 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@aycarambas 4 года назад

You guys pay attention to detail and thats important during a real life scenario. Thank you!

@1AAuto 4 года назад

+A G Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@debbiejankord64 2 года назад

Helped me a bunch after returning from shop and later realizing the mechanic had placed tire on cable but never cranked it up. Was swinging around, smacking the exhaust pipe. So I needed to crank it up. Saved family member a trip to my house to take care of it. Been so long I'd forgotten how to assemble the crank or exactly where the opening was. Very nice video. TY!

@yuemao7497 3 года назад

This was very helpful as I ended up watching this on the side of the road.

@ronford2801 3 года назад

Just an update for you. On my 2011 Ranger, the square end of the rods fits into the lowering mechanism, not the spoon end. This may be the case with other years as well.

@Ran_Dodgers_music 3 года назад

I got a 2011 as well and just ran into this problem. Your comment is much appreciated

@dankkitty7226 2 года назад

I have an 07 and I think I'm having the same issue. Plus it doesn't help that the guy I bought it from twisted one of the rods at the connector

@ronwilleman7584 2 года назад

I wish I had checked your comment, spending 10 minutes or more trying to get the spoon to fit. The 2007 uses the square end of rod too.

@Shah37Bang 3 года назад

Just bought a Ford Ranger, and l was wondering how you put your spare tire on and more importantly how you remove the spare from under the truck. Haha it's definitely different from my KIA! Thank you guys very much for posting this video! Gonna save me some future headaches! Much appreciated! 🙏

@the.porter.productions Год назад

O-H-I-O Porter greetings 🇺🇸 We recently purchased a 2003 Ranger & I thought it would be helpful to watch it. Good tips on being safe & using wheel blocks. I’ve always used a block of wood between the jack & axle/frame when raising the vehicle. I was told to avoid using metal to metal when jacking up a vehicle as much as possible. Some jacks have a notch or indentation in the plate to help keep a tight connection when jacking up. Good stuff. Thanks for taking time to do a good video. 🥰🇺🇸✌️

@moomoo3031 5 лет назад

Thanks for showing me this, so much easier than trying to do it first time with the manual. I had to get the jack out the other day to help a friend, and I couldnt figure out how to get that lugnut one back in, so thanks for showing ALL the details. Except the fun of doing this when the truck is covered in mud, haha!

@1AAuto 5 лет назад

+moo moo Thank you for the great reply! We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@beerhistory Год назад

Thanks for this video! I couldn't figure this out on my own. What I find really annoying about this design is that valve stem is on the top side, so you can't check the air in the spare very easily or refill it.

@angusmullins511 4 года назад

I like your presentation and find 1AAuto videos helpful. I need to replace front suspension components on my 2000 Ranger and I will order the parts through you guys to show my appreciation.

@1AAuto 4 года назад

+Angus Mullins Thank you for your order! We'd love to hear about your experience. Here's a link to leave us a review on Google: goo.gl/i5JFNY

@joeaiken2372 2 года назад

it’s been so long since I changed one on my 2006, I figured a refresh on the how-to would be helpful, and I was right

@Swavyenrik 2 года назад

Very descriptive, thank you.

@trevor19qhshe 4 года назад

I 100% don't have that special compartment for my jack

@kiyosenl.3889 2 года назад

Well might be a bit late but i did some digging because I honestly didn't know how to lower one of those rear tires (seriously i can build an engine and install it but cant lower a tire lol) and in the trucks where the jump seats are in the side walls of the ranger its hidden behind the passenger side jump seat, i literally just found that out 20 minutes ago, went outside and checked lol

@kylebergeron9406 7 лет назад

Can u make this vid for a 1999-2006 Silverado, plus a good tip is to try to lower the spare first so you don't do all that work of getting the tire off if the spare is rusted up to the frame, thanks

@drips5596 3 года назад

Very very nice video honestly saved my life 💯

@1AAuto 3 года назад

+drips 559 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@juandoez3031 Год назад

Great presentation Thank You

@shariellis2272 Год назад

Thank you so much for your videos!!!

@JohnOeltjen Год назад

thNK YOU FOR YOUR HELP

@pressb 9 месяцев назад

You mentioned tightening in cross pattern but you didn't show how you work around them in that pattern in the video. Another thing is to check the seats for the wheel nut in the spare wheel are free on mud and grit as, if there, that can give a false signal when tightening, so once you move the car they work their way out and you then have a loose nut. Ditto for the wheel and the hub. Another thing to check is to make sure the spare does not have mud stuck to it as, if there, that can result in a wildly out of balance wheel. Always a good habit to check the nuts after a short drive in case the wheel has "settled" giving a loose nut e.g. the reason above. Check the spare is pumped up as if you have a soft tyre it is best to know. Handy to have a small tarp to lie on as dirt burrs, thorns, ants etc. can make the process more uncomfortable than needs be.

@Da_Crow 4 года назад

Goo video ! Except 2007 is not a spoon but one of the other ends to put in the hole

@1AAuto 4 года назад

+thecrow Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@schvanysepitome8500 7 лет назад

Thank you for these videos man

@zydeco2024 3 года назад

Oh man this would have been great to know

@EnviroSteward 2 года назад

Thanks You Tube!!

@ridingradsslingingstrats2846 3 года назад

Thank you sir .

@stevenwolfgang2744 7 месяцев назад

Wouldn't it make sense to have the spare tire in the carrier with the valve stem pointed downward (rather than upward toward the underside of the truck bed) so that checking/adjusting the air pressure is easier?

@markbarbee3454 2 года назад

I sure wish my 2005 Ranger had that hole between the bumper and the tailgate. After 3 shops, one of which being the local Ford dealer, looking and not finding it, they determined that mine was not added from the factory by mistake. They said they could not drill it out because they have never seen one like that before, and would be worried about damaging my truck. I will have to drill the hole out myself.

@williamweiss6128 Год назад

Tried this many times. Doesn't loosen the tire. PB Blaster is next, I guess.

@kerryprance3767 2 года назад

THIS FAILS TO TELL YOU! on my 1999 Ranger you HAVE TO HAVE the weird KEY to unlock the hole that the hoist rod goes into. This looks like a short ignition key mounted on a long black rod. Mine was in my glove compartment. I don't know where the factory puts them. maybe in the jack compartment?

@ronaldcach2779 7 лет назад

Great video. Can you do a video on replacing the heater hose on the back of the engine on a 2.3 liter, 2006 4 cyl. ford ranger? People tell me you have to remove exhaust system, and lower the back of the engine to get at the heater hose clamps. Please help. THANK YOU

@xx_nomansland_xx1764 2 года назад

Does anyone know an alternative to lowering it? My tire hoist will not work…

@kiyosenl.3889 2 года назад

Right angle grinder, those things apparently rust in place all the time if you don't take care of them Remember kids, anything thats steel thats supposed to move and isn't moved often will fail unless properly protected and lubricated lol

@parkisg 3 года назад

My jack was in compartment behind the passenger fold out seat.

@Dcoy-um3hl 10 месяцев назад

Quick question all. Can I put a full size spare under the bed? The regular spare is like a trailer size tire, my full size tire is a p225 70/r14. I’m unsure if I can use a full size on the spare rim, which is also a 14, that’ll go up under the bed all the way.

@thatdudemoe9109 10 месяцев назад

you can!

@weeverob 2 года назад

In the back of the truck I don’t have a hole for the rod to insert. Instead there’s a narrow slot that looks like it’s made for a key, perhaps a car key? Problem is a key doesn’t fit plus the ignition key is too short to be able to hold it while trying to insert. What’s the deal? My truck is a 2000 XLT

@ahmadalnaim490 5 лет назад

I have 1996 Ford xl ranger standard cap...it's missing the jack kit and spare tire carrier Any idea where can I find those and suggestions for universal stuff?

@kiyosenl.3889 2 года назад

Spare tire holder, you can probably find that on auto part sites, short of that eBay or even the junkyard, as for the kit, might find one in a ranger in the junkyard, or you could assemble your own, there are kits for all those rods for lowering the spare tire then just buy a bottle jack, take a look at safe Jack, they are pretty neat, but in all honesty you probably aren't missing it, on most rangers they seem to have hidden it behind the passenger jump seat, yet all the videos on it just show the location for this specific style of late model ranger

@kristinasullivan9436 6 лет назад

I have an 02 ranger and one of my tires went flat the other day. I went to discount tire and had it replaced under the warranty and had the original spare replaced that came with the truck when I bought it in 05. One of the lug nut bolts (where it screws in to hold the tire) that part is stripped and D.T. said to have it replaced. So now I only have 4 bolts on that tire. How expensive is this to fix? Any ideas for an easy fix? Thanks.

@1AAuto 6 лет назад

+Krissy Sullivan We currently do not have an auto repair video that covers this particular repair on your application. You might have to remove the axle to replace the wheel stud. Thank you for visiting us on RU-vid. 1aauto.com

@kiyosenl.3889 2 года назад

A liiiiiiiittle too late for you but to anyone else coming across this, its really easy and cheap, just find the proper wheel studs and look up a video on replacing them, its basically just hammering out the old ones and pressing new ones in it's place, id its a front one you just need to remove the rotors, not very hard and then you can work on it off the car (at least in the case of the ranger, some cars have rotors that slot over the wheel studs and use the wheel to sandwich them into place), the rear ones may be more tricky as there are drum brakes and such in place and i honestly don't know if you would need to remove the axle to gain clearance to push them out, in any case 4 lugs isn't really that dangerous unless you're doing some craaaaaaazy stuff in that ranger

@nikolaychetvertukhin4434 2 месяца назад

You might want to double check the instructions you give at the beginning of the vehicle, you say downhill twice when chocking the tire in relationship to the nose of the vehicle.

@butchfrancis6258 2 года назад

I did all that and the spare tire would not come down.....after looking at the hole with a flashlight I see that I didn't need the last end of the four, so took off the spoon end off and then the tire came right down. using only three sections..

@trinitywave 3 года назад

I have a Mazda B2300, which is very similar to a Ford Ranger in almost everyway, even the jack kit is the same, the same above the bumper location to lower the tire. However, I can't seem to get the tire to lower. I wonder why.

@kiyosenl.3889 2 года назад

Probably rusted in place, you can try soaking all the components in penetrating oil and reapplying 300 times over, or just cut the holder off and replace the mechanism

@manuelsalgado8510 2 года назад

Full size spare tire?

@siriusraycraft5263 3 года назад

Come here cause my 03 has a substantial leak and no matter how I put that in the hole it would not lower. Any ideas?

@kiyosenl.3889 2 года назад

Right angle grinder lol, those mechanisms have a knack for rusting themselves stuck

@eugenemoore3106 5 лет назад

What stinks is when you buy a vehicle and there is no jack like someone thinks you will never have a flat now that's what I call a intelligent person

@bobetization 2 года назад

i can't shoot to the pulley where lowering the tire

@nodsib 4 года назад

Well, that’s good to know. I was doing it right, so I guess the spare winding mechanism is busted

@1AAuto 4 года назад

+nodsib Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@keyleaschneider8732 4 года назад

What if the mechanism to lower the tire is rusted and wont lower

@1AAuto 4 года назад

+Keylea Schneider You can try some penetrating oil to loosen up the seized parts, otherwise, it may need to be destroyed and replaced with a new spare tire mechanism. 1aauto.com

@notimeboy 6 лет назад

Does this apply to an '02 Ranger as well?

@kiyosenl.3889 2 года назад

They sometimes put the kit behind the passenger jump seat on models where they face the jump seats at eachother, thats where they hid mine

@travisvilandre3159 5 лет назад

Note! Some ranger keys to dismount tire is OPEN ended. So that little hook bar is useless. Just use one of the open circle ends. Feel like a idiot

@fredost1504 5 лет назад

This procedure wont work if you have a flat tire in the front of the truck. its jack point is on the ground. what to do then? Call AAA? heh.

@rileymcmonigle9614 5 лет назад

Please elaborate

@RalphSampson... 4 года назад

2012 Ranger? 2011 was the last year, no?

@stevew9563 3 года назад

Partly right, last consumer model year: While among the highest-selling vehicles in the compact segment for nearly its entire 29-year production, an overall decline in demand for compact trucks led to its discontinuation after the 2011 model year (a short 2012 run was produced for fleet sales). On December 22, 2011, the final Ford Ranger produced for North America rolled off the Twin Cities Assembly line (as the final vehicle assembled at the facility)