How to Clean Beeswax 

Nice video, but I’m thinking a putty knife would have wasted less wax when scraping the bottom. Thanks for the video.

YOU can get it cleaner by using smaller pots as you go end up wit 4 or5 inch pot that means use hot wire to cut harf a inch up from bottom and just reheat the bottomt bit

Useful and pretty easy to processe

Where can we get that beeswax???

Hi, how about remove the smell from beeswax??any solution??

Have you ever tried sifting some yuck out while the wax is melted?

You might want to rethink your process - in your 2nd melt you stirred the pot with all that foam on the top - you succeeded in reincorporating the floating impurities which produced that grayish powdery look on the top of the rehardened 2nd block - that could have been eliminated by skimming off the foam - go to your shed/garage and claim an old actual scraper - you were sawing and cutting away wax while trying to remove the sludge off the bottom - go to the dollar store and buy a pack of unbleached natural fiber coffee filters - take all your waste filters and shaved off dirty wax and place into one of those used bags; tie it off - place in bottom of pot, weigh it all down with large rocks, add water 5-6 inches (or more) above the bagged waste - all your wax will float out of those wax robbers - after you recover the hardened wax and pour off the water, you will be left with wax free waste and filters - rinse and wash the filters to be used again - the remains will be soft and crumbly to be tossed and spread to the places chickens usually peck about, or spread to your garden or tossed in your compost - remember to keep the bags and rocks submerged while melting - you may need to melt one more time to pour through the coffee filters to enjoy a very pristine wax - save all those filters to add to future used filters for even more wax recovery

im struggling with this method ... once it hardens I cant get it out the pot ... have you had that happen ?