how to clean graco magnum painter plus true airless sprayer cleaning video 

Appreciate the Video buddy. Today was my first attempt at Cabinet Doors for a client. I was really apprehensive as I had never used a sprayer before. These are amazing and I did 18 cabinet doors in about 15 minutes but man the prep and making sure I was doing things right was so time consuming. I reached out to your video because I am so tempted to run some hot soapy water thru this thing to make sure its clean, but nothing I can find says to do that, so I wont. I did notice you left the spray nozzle on when cleaning the lines, I took mine off and it allowed a lot more water to flush thru faster, plus I was able to get my nozzle and parts into hot soapy water faster. Im a fanatic about letting paint dry on things, I even wrap and seal my rollers like a maniac lol.

Spraying hand is DEFINITELY A NO-GO! You may have had it on lowest pressure, but you may encourage someone else to model your behavior and end up with an injection injury.

Love Keith Sweat man. Thanks for the video

Where do you dump the dirty water?

Nice video and...priming" the pump etc. How to know you're on "declogging" mode with the air sprayer tips, etc.

How do you get that last bottle of oil or what ever it is into the painter? A couple of months ago I cleaned mine with water and when I tried to use it yesterday it would not prime or spray. I had to disconnect the hose from the pump and there is a check valve in there that had rust on it and the ball was stuck. I broke the ball loose and clean the ball and spring then it worked perfectly. It seems like we should run something through the system to help prevent rust from forming.

Very helpful presentation, but i can't figure out where to oil the darn thing, it doesn't say in the manual or anywhere.

I was really apprehensive as I had never used a sprayer before. These are amazing and I did 18 cabinet doors in about 15 minutes but man the prep and making

I just bought the exact same paint machine but how much of the fluid for storage do I use...when storing...???

Funny it takes longer to clean then actually get paint on. I would rather sit and spray water for 15-20 min then pull out a brush and roller any day

Bumping that Keith Sweat

For people who are complete beginners, you need to explain literally what each button, nozzle, twist is for. How you're "priming" the pump etc. How to know you're on "declogging" mode with the air sprayer tips, etc. Catch my drift? THat's probably why you have 25% dislikes, thats a very bad ratio. However, with those few little suggestions your video could help a lot more people.

Where do you dump the waste

Shirley has to be a better way to clean this. It takes longer to clean this machine than it does to actually spray paint