How to clean intake valves with CRC GCI cleaner on a 2015 Honda Accord

Подписаться 19 тыс.

Просмотров 228 тыс.

50% 1

In this video I will show you how to clean your intake valves on a GDI engine. The car is a 2015 Honda Accord 2.4L. The procedure
will pretty much be the same on most all cars with Gasoline Direct Injection. Items used from Amazon below.
CRC GDI Intake Valve Cleaner▶ amzn.to/2KgAO4E
Clear Hose▶ amzn.to/2I60Ua0
Rubber Stoppers▶ amzn.to/2HuwtNJ
─────────────────────────────────────────────────
Paypal Donation to the channel▶ www.paypal.com/cgi-bin/webscr?
cmd=_donations&business=BQT3TDAU85YDG&lc=US&item_name=RU-vid%20Product
%20Reviews&currency_code=USD&bn=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted
─────────────────────────────────────────────────
∙Washing and Drying:
-------------------------------------------------------------
MTM Hydro PF22 foam cannon▶ amzn.to/2u34cXf
MTM Hydro SG28 Spray Gun▶ amzn.to/2sYB1Qh
Stainless Steel Hose Swival▶ amzn.to/2kGQxzP
MTM Foam Cannon▶ amzn.to/2mD1qnu
Chemical Guys Glossworkz▶ (my number one favorite car wash) amzn.to/2lBTzqu
Adams Car Shampoo▶ (My number two favorite car wash) amzn.to/2mgx4oc
Lambs wool wash pad▶ amzn.to/2dCokGS
Microfiber "pluffle" towel I used in the video my favorite▶ amzn.to/2n85Gs4
Microfiber drying towel shorter nap▶ amzn.to/2dp8tsc
Microfiber drying towel shorter nap but just a little larger▶ amzn.to/2ldiyP6
Eagle Edgeless 480gr microfiber towels▶ amzn.to/2kZ39iL
Meguiars X-Press Spray Wax▶ (my number one favorite detail spray) amzn.to/2mD3T1f
Optimum No Rinse mixed with distilled water as detail spray▶ amzn.to/2n6GZeN
Double Mist Sprayer 1/2L ▶ amzn.to/2nqnG3K
Mini 1oz "shot Glass" I use in each video▶ amzn.to/2oQJgzA
∙To build the Submachine Gun Style Foam Handle parts are below:
-------------------------------------------------------------
Forney Spray Gun▶ amzn.to/2kDoAGu
Forney Quick Coupler Male Socket▶ amzn.to/2kJ9Vsr
Forney Quick Coupler Male Plug▶ amzn.to/2kJ5gqG
Blue Monster Thread Tape▶ amzn.to/2khBQD8
DUSICHIN Pressure Washer Spray Nozzle Tips▶ amzn.to/2k7aMUW
MTM Foam Cannon▶ amzn.to/2hh72yr
Flexible Blue Wand▶ amzn.to/2llCaxH
Stainless Steel Hose Swival▶ amzn.to/2kGQxzP
Neptune Rubber Hose▶ amzn.to/2kC9KTj
∙To buff out swirls and scratches below:
-------------------------------------------------------------
Porter Cable Polisher▶ amzn.to/2m24x5k
Rupes LHR 15 Mark II Bigfoot Polisher▶ amzn.to/2m8dvOV
Orange Waffle Pad▶ amzn.to/2kXPHvu
Adams Microfiber Cutting Pad▶ amzn.to/2lYSjgP
Meguiar DA Microfiber Cutting Pad▶ (my number one favorite buffing pad) amzn.to/2n3zS8c
Sonax Profiline Perfect finish▶ amzn.to/2mD1sfc
Adams paint correcting and finishing polishes▶ amzn.to/2lxPlyT
Adams Liquid Paint Sealant▶ (my number one favorite paint sealant) amzn.to/2kXK293
Eagle Edgeless 480gr microfiber towels▶ amzn.to/2kZ39iL
Clay Bar▶ amzn.to/2lZJ4fw
∙Interior Detailing Supplies are below:
-------------------------------------------------------------
Metro Vac N Blo model Pro 83BA▶ amzn.to/2nTDd9m
Eagle Edgeless 480grm towels for the tint▶ amzn.to/2n4UFu6
Chemical Guys Wonder Wash for the window solution▶ amzn.to/2n4YIGB
Chemical Guys Glass cleaner▶ amzn.to/2nHrKKO
Heavy Duty Spray bottle (Made in USA)▶ amzn.to/2nTKbv2
Mastersons Car Care All Purpose Super Cleaner▶ amzn.to/2z7If7O
∙Wheel and Tire Cleaning Products are below:
-------------------------------------------------------------
Mastersons tire and trim shine▶ amzn.to/2n4Xzim
Long Handle Wheel Well Brush▶ amzn.to/2pfAiZt
Super Soft Updated Wheel Brush▶ amzn.to/2oR63LF
EZ Detail Brush (Racoon) My Favorite!!▶ amzn.to/2oUh2Bh
Wheel Woolies in three Sizes▶ amzn.to/2nsMSbk
Simple Green▶ amzn.to/2oUaNO1
CarPro Iron X▶ amzn.to/2rKjlLq
∙Glass Cleaning Products are below:
-------------------------------------------------------------
Mastersons Car Care Glass Cleaner▶ amzn.to/2xGCNrB
Eagle Edgeless 480gr microfiber towels▶ amzn.to/2kZ39iL
∙Windshield Cleaning Products are below:
-------------------------------------------------------------
Citrol Aerosol▶ amzn.to/2DS9t4d
Citrol Gallon▶ amzn.to/2pALWka
Leak Proof Spray Bottle▶ amzn.to/2G1cRje
Masterson's Glass Cleaner▶ amzn.to/2pBUJ5w
303 Protectant Spray▶ amzn.to/2G3eJIv
Chemical Guys▶ amzn.to/2pF8Yq7
Chemical Guys OG Claybar▶ amzn.to/2GpgeQJ
Eagle Edgeless 480gr microfiber towels▶ amzn.to/2G5jX
Engine Cleaning Products are below:
-------------------------------------------------------------
MTM PF22 Foam Gun▶ amzn.to/2xGCNrB
Zep Heavy Duty Engine Degreaser▶ amzn.to/2yFskQM

Авто/Мото

Опубликовано:

26 апр 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 509

@juansb30 Год назад

WOW! I just did this for the first time on my 2014 Honda Accord after getting a check engine light at 175,000 miles. The engine light diagnostic showed Error Code P0087: Fuel Rail/System Pressure Too Low. I thought it might be the fuel pump which would’ve been around $1500 to fix. So before doing that, i changed the air filter and used the CRC GDI Intake Valve & Turbo Cleaner and i must say I’m extremely happy! Not only did the engine light go off and i saved myself a lot of money, but after about the second day as this cleaner continued to work it’s magic, my Honda is running like she’s in her early 20s again! I highly recommend treating your car with this! Thanks for this video!!!

@hypnoticimage9687 11 месяцев назад

I wish I saw your comment before I change the high pressure fuel pump but didn’t pay that much $150 on eBay for the part and about $250 on labor at the shop.

@andersdrakkar 4 года назад

Hi Russel, I've been looking to clean my 2015 Hyundai Santa Fe XL engine with this CRC formula. After looking at several videos, I believed yours to be the best with that closed to vacuum tube system directly into the engine, just like you did. Just came back from doing it now and it worked wonderfully, no check engine lights at all. Some smoke at first after the one hour wait but it now does idle silk smooth. Thanks a lot for your video! Thums up!

@randellgribben9772 2 года назад

did you see any before and after photos..if so,, what video

@ospuddy 5 лет назад

Thank you for the video. I cleaned my intake valve using your method. I made one minor modification to your formula: I use a hose with a smaller inner diameter (2mm) just large enough so the straw can fit in the hose and adapted the hose end to the diameter of the vacuum port. If the hose diameter is too large, the liquid will lose its capillary action. A fun fact of using the hose is that the hose gets cold as you spray due to the expansion of the liquid (similar to the evaporator mechanism of a refrigerator). I also got the check engine light after this procedure, and the car limped along for a block billowing blue smoke, but the CEL turned off after a few restarts and the engine is running smoothly now. I appreciate you posting this video.

@jamesayers1770 4 года назад

Thank for sharing I watch another video and this guy took his whole intake apart and I was hoping there was a simpler way thank you

@usmc4301 5 лет назад

I had the same warning lights come on as well. Blinking engine light, electric steering , tpms. I used sea foam thru the throttle body though. Same affect, car does run better after it self corrects itself. I ran it hard for 10 minutes then parked it and shut it off. Upon re starting everything cleared out.

@rudyruiz9615 5 лет назад

did the same cleaning on my 07 cooper "S" (turbo) it went from crappy mileage and rough idle to smooth idle and 10% better mileage.

@-MrRichBiker1967 5 лет назад

Great video good description that has to be the cleanest engine I've ever seen... I hope that you change your oil after you did this!!!!!

@TheAdventureAuto 5 лет назад

I had the same issue and it freaked me out! Glad I wasnt alone :)

@ospuddy 5 лет назад

Update: Technical Support Team at CRC tells me that they can't guarantee that the product will be properly atomized if the hose extension is longer than 6 inches. They recommend directly spraying the product into the vacuum port.

@coltencolson2034 2 года назад

I dont mean to be off topic but does someone know a trick to log back into an instagram account? I somehow forgot my account password. I love any assistance you can give me

@magnusrayan498 2 года назад

@Colten Colson instablaster =)

@AJ6992 2 года назад

I was wondering that as I could see a build up of fluid in that tube as he was spraying. I have a 10th gen and I think I’ll take the pcv hose off the intake side by my catch can and have someone spray directly into the nipple while I keep revs up👍🏼

@martymcgrogan 6 лет назад

I appreciate your generosity and public service. Has anyone ever used this product/ technique, and then pulled the heads to note the effectiveness on the valves??? My worry is overheating or poisoning my catalytic converter`s catalyst. How much danger is there for this?? what is best is hybrid direct AND port injection...... but it is expensive, and car manufacturers are competitive......and greedy. I have a 14 Kia Cadenza, direct injection with 27K. And I feel a very slight decrease in smoothness and responsiveness from new. Let me know, MJM

@biz4twobiz463 5 лет назад

Recently did this procedure on a 2016 Honda Pilot 2wd Touring. Went in at air cleaner just past MAF sensor. After the one hour heat soak, took for 10 min drive per instructions. All the Honda sensors light up like a Christmas Tree!! Had to use a INNOVA 3130 scanner to delete any codes. Not once, but twice!! LOL!! After that, the Pilot has been running fantastic and the idle is SUPER smooth. Did it around 70,800'ish Km. Enjoyed your video!! Merci!!

@9thGenAccord 5 лет назад

Very nice!

@mattbova1138 5 лет назад

Did it smoke really bad?

@DkpProductions 4 года назад

Only 35k miles? Definitely not worth it.

@iaintempl8 4 года назад

Carb cleaner worked great on my 2012 mazda 6 2.0. Fully warmed up the engine and held the rpm at 2500, sprayed the full can in short bursts to prevent stalling. Engine is much smoother and fuel consumption is a lot better.

@W0LV1E45 2 года назад

did it smoke? I use carb cleaner on my veloster and no smoke. I drive mine hard so that might have helped with carbon not building up.

@iaintempl8 2 года назад

@@W0LV1E45 no smoke.

@Yukam1912 4 года назад

dont be ashamed for not doing this after 30 k , mine honda has 120 k on it and i never did it

@chrispolk8919 4 года назад

Russel, I just bought a 2018 Tucson form a rental car agency with 35k mile. I reschered the GDI engine and the valve build up keep showing up. I didn't know the mantaines history of the car so I tried the CRC intake valve clean. I followed the video step by step but, I had to periodically allow some air in to the line so the CRC could be vacuumed in to the engine. Other than that it worked great! It is just about done heat soaking. I will update when test drive it.

@chrispolk8919 4 года назад

Just finished the test drive & on cue when I hit the accelerator a lot of blue smoke came out the tailpipe LOL it made everyone behind me slow down. My Tucson has more power when ECO mode, run smoother & quitier. Thanks for the video!

@donaldfennell971 Год назад

Well thought out approach. I'll try the brake vacuum & throttle intake.

@sk8allica1 4 года назад

Thank You for this video, please forgive the negative comments they come from uneducated people who have not learned to have proper manners.

@rickymann66 6 лет назад

thanks for the video. No check engine lights for me. I think it runs a little smoother cant be sure. I will watch and see if MPG increase. I will be changing the oil tomorrow

@-MrRichBiker1967 5 лет назад

Smart man changing the oil

@prandi5410 4 года назад

Great Video....please do a video on cleaning the 2016 Honda Accord Hood vent;

@lalajee143 4 года назад

Love the sounds of birds.

@fkutb Год назад

Exactly what I needed. Thank you!

@BRIANMCKOY 5 лет назад

Genius move using the vacuum system

@robertklein7679 6 лет назад

Russel, great video but if you think of the wind currents in the intake and then induce fluid to it by way of the brake booster inlet please take a look at where that is on the manifold and you will see it will only favor the closer ports, the majority of fluid will be abundant on some of the valves an very little to some and maybe not even a drop of fluid will even reach some of the valves this system would only partially work if only the manufacturer would put the booster inlet immediate after the Throttle Body or Carburetor. Also, these products only work when they end up being vaporized, Please try this take the other end of your hose off the engine and then spray the aerosol and you will see it will only come out as a liquid not vaporized. Therefore you will only get a steady stream flowing on the inside of the manifold to only a couple of the valves. Thanks

@SevenPageLetter 4 года назад

Robert Klein I agree with your logic. Is there a vacuum line port/nipple on this Accord that you would recommend seafoaming?

@Rickbearcat 4 года назад

I've seen this product sprayed directly onto the intake valves of a BMW 6-cylinder engine. With both valves closed, he formed a liquid puddle on the intake side of the valves. This product does not need to be vaporized to work. Just the opposite in fact. It has to be and remain in a liquid state to coat and penetrate the carbon deposits for full effect. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Kn6NVHLy-Xc.html

@TheOzthewiz 4 года назад

Well, when all was said and done, his engine ran SMOOTHER and STRONGER after the procedure! Obviously the cleaner did what it was supposed to do. I'm convinced!!

@marxseet 2 года назад

Might not be so depending on design of the manifold distribution pattern, because if that happened to the cleaning foam, this will also happen to the air distribution during normal drive. I think the new generation of car should have overcome this issue.

@DIYAutoworksNG 2 года назад

@@marxseet You definitely have a point. Though since liquid is heavier than air, it could be plausible to have the cleaner gravitate towards the closer ports. I intend to do this but with before and after shots of the intake valves...

@marxseet 2 года назад

wow, hope this is a alternative to strip my manifold to clean it manually. Thanks

@zwari1 5 лет назад

I did the same method u do but the car didn't show any cods the car run smoothly and the gas mileage its way better Thank u

@kennethgerardsapp9844 5 лет назад

Great post thanks Very informative

@elc1465 3 года назад

Hey real quick question did you have the lights on the dash before you sprayed the product cuase i have those lights on right now does doing this clear the lights?

@jack8356 3 года назад

Good thing i bought a port injection honda. No intake problems but im no so sure about the combustion engine in the future

@johnnyd701 6 лет назад

Did you have to change out your spark plugs after? What is the difference between this and seafoam?

@jimh8644 2 года назад

Well done - good method to make it a one-man job.

@jacobball4771 4 года назад

I have 3.5 2001 acura mdx where would i place the tube on what vacuum line.

@horacehall6013 2 года назад

I have a 2014 and curious about where you got the hose from. Im pretty sure I can get the cleaner from Advance or Auto Zone but just like the hose setup you did.

@ChrisUrsiny 5 лет назад

great video bro. i seen this stuff about 1 month ago and decided to buy it and try it on some lawn and garden equipment. i service and repair lawn and garden machines and this stuff works on these engine as well. i have used it to clean the intake valves on caked up carbon deposits that was causing lower than normal spec. compression. all in all it did remove the majority of carbon deposits from 3 lawn mower engines i was testing it on so i am sold that it works as it should.

@9thGenAccord 5 лет назад

Good to know.

@tomfaz4193 5 лет назад

Chris Ursiny j

@nickking1510 4 года назад

Chris Ursiny work good on old school small block Chevy engines and on gm 3.8 as they get filthy from egr

@G9Classified9 Год назад

Did you rev engine 3 to 4 times after can was empty and if you did reattach the vacuum hose or did you leave it connected to can ??

@prescriptionoatmeal7970 2 года назад

Do you suggest this similar method with a 2009 accord ex-l 4-cyl?

@FPVish 3 года назад

whats would be the difference between this and using Seafoam in the same hole ?

@adrianniemiec8669 2 года назад

I have been doing the same procedure on my CX-3 , every 7-10K. It idles and runs like a dream. Some ABS and 2 more yellow warning signs come on for some reason during temperature changes , other than that it is ok.

@kumamakanui1514 4 года назад

I have 143k miles on my Nissan frontier. Never cleaned the valves before. Is it safe to do it now?

@AndresSalazarAutos 5 лет назад

Did this today, my car still has the check engine light ON, but I do feel a bit smoother idle, but something tells me I need new spark plugs. However, I do feel much better low end torque, hopefully it will help fuel economy...

@fejzocecunjanin2028 3 года назад

Is it necessary to do this on my 2017 Honda Pilot exl with 32k.

@mansuchi5637 2 года назад

I have the same Car. What is the inner diameter of the transparent hose you used? What if there is vaccum leak on brake booster hose while injecting CRC Valve Cleaner?

@Nocode98 2 года назад

Is this safe to do if I have never done this and am at 77K miles? My car runs great, no noticeable loss of power or torque. I take really good care of if, oil changes, other fluids and highway miles. I just recently learned about this and didn’t know.

@richarddemsharresurrection8887 6 лет назад

Very nice idea thanks

@johnnyd701 5 лет назад

Did you have white smoke come out the exhaust?

@morriosnjim5118 4 года назад

Hello, This is one of the fantastic video!! Thank you for this. I have 2013 Honda Accord. Honda dealer told that I have to do ‘Perform Fuel Induction Service (Found dirty throttle body)’. Is this video for the same what they were talking about? Question: Do I need to do this process / spray it till the bottle completes?

@pietsee1000 4 года назад

Morriosn Jim Cleaning the throttle body is different Never do this to your gdi engine When carbon falls of your intake valve it will scratch or scour your cylinder walls Which would result in loss of compression and could start oil consumption And you could even damage your catalytic converter.

@TheOzthewiz 4 года назад

@@pietsee1000 Yes, be safe. Let the carbon build, when car starts to run like shit, get rid of it!

@brazenbunnies Год назад

What about spraying the clraner into the PCV port?

@niravkhatri9197 9 месяцев назад

Hey..very informative video. Thanks. Do you have a similar video for Honda CRV 2006 LX??

@repairvehicle 6 лет назад

Good idea to replace Oil after this cleaning. Oil is contaminated with unburned cleaner.

@gregschlegel5964 5 лет назад

Correct, it’s a good idea to do this prior to your oil change. These chemicals can be hard on your internal engine seals which may cause engine leaks.

@TheOzthewiz 4 года назад

@@gregschlegel5964 These cleaners are BURNED along with the gasoline!

@florinmarc5510 2 года назад

I wonder if the CRC INTAKE VALVE CLEANER also cleans the PCV valve... does anyone know?

@minhtrietle8914 5 лет назад

What is the size of the clear hose tube ?

@TaintedMojo 3 года назад

Does this work if you have a turbo though?

@tpm1868 2 года назад

I noticed that your idle is around 700-800. My 2014 6sp Accord idles at 200. Is yours idling a little higher because you just used the CRC cleaner?

@abdallamakkawy4243 5 лет назад

Would you please if you have a video for installing an oil catch can in 2016 Honda Accord 2.4l engine. Thanks

@DkpProductions 4 года назад

For why?

@yomiadebayo9478 Месяц назад

pls what can make my Honda accord burns my engine oil so fast like weekly

@t436 5 лет назад

I did it to my 17 Accord Sport 6MT and I can't prove it worked. What I can say is the cruising speed of some gears have changed a bit. 3rd gear for me would coast about 36 MPH and I would tap it to get 40 ish. After cleaning the car instantly wants to cruise 44 MPH.

@kevinpalacios4193 2 года назад

Can or cant?

@pradiptashome88 4 года назад

Thanks for the good information. One question -- how do you drill a straw sized hole in the rubber stopper. Thanks.

@johnjkizer6399 3 года назад

With a drill and a small drill bit

@thefuture8173 2 года назад

If you are seriously asking that question, maybe you shouldn’t be attempting any type of automotive work.

@vernonkaris1524 Год назад

The clear hose I have a 2016 Honda crv earth engine with 56000 miles I want to do mine ty for the video

@rm-zn9yh 2 года назад

I have a 9th gen at 175,000 miles, can i still do this to my EX?

@veasnayong3456 2 года назад

Can I'm use on 2018 accord 1.5t?

@BrianHer530 6 лет назад

I have a 5th Gen CR-V and where should I put it...

@tmwei396 6 лет назад

Great video. We have a 2015 Mazda 3 and a 2015 Honda Fit both with GDI engines and I plan to do the same CRC treatment to both of them. My main concern is picking the right engine hose to disconnect and attach the clear hose with the plunger to. What should I look for in the many engine hoses attached to the engine to be sure I'm pulling off the right one to attach the clear one to so the cleaner will be sprayed on to the valves? Also, do you use up the entire can of cleaner per use? Thanks.

@9thGenAccord 6 лет назад

Just find one that is connected to the intake for best results. Yes use the whole can.

@Suction_ 5 лет назад

The Mazda doesn't need it. They designed it to run hotter to prevent buildup as well as an integrated catch can. Dont waste your money.

@JGBecknell Год назад

1000 RPMs seems kind of high at a stop. Is that what it should be? Is it smoother at 1000 RPMs?

@stealthg35infiniti94 3 года назад

I do the same procedure but instead I use Sea Foam with good results both on GDI and Port Injection engines...It will bring a high mileage car back to life...Doing this every 15k miles should prevent expensive walnut valve cleaning in the future...If you wait until you have the problem, one cleaning session will not clean up the problem...Several attempts will have to be made and then if permanent damage has not been made already.

@alexandercahoulan6583 3 года назад

those bird sounds are not anywhere near where i live. Beautiful sounds

@stevie5484 3 года назад

This question may have been asked, but it seems the cleaner will not be equally applied to all the valves, so only the valves closest to the vacuum hose will get most of the cleaner. Thus, the air intake may be a better option. Thoughts?

@liquidh5226 8 месяцев назад

Do it both through the brake booster line and also the air intake throttle. Do clean your air intake throttle first. I plan to do this.

@SUPERNVA-gr4sr 2 года назад

Can i use crc on port fuel injection car

@Zeus0886 6 лет назад

Seriously considering doing this for my 2013 Accord EXL V6. It’s has 44,500 Miles. Just scared it might cause an issue.

@MrAsianAirsofter 2 года назад

Ur v6 is port injected

@brazenbunnies Год назад

I got a 2097 code after performing this procedure. Tried to clear but it came back.

@denztl 6 лет назад

I am going to use the CRC Cleaner on my Ecoboost Mustang when I get a few more miles on it, now at 3000. I believe the cleaner should be injected into a central location before the intake manifold divides up to go to the individual cylinders. The vacuum port you are using is likely favoring one or two runners on the manifold and therefore not getting even distribution of the cleaner to all intake valves. There are numerous videos here on RU-vid showing this phenomenon and how oil from the PCV line will coat certain valves more that others . Also I saw a CRC video that indicated injecting the cleaner after the sensors at the throttle valve.

@denztl 6 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RcVDZAauO88.html

@Sagina1999 6 лет назад

Truth

@pietsee1000 4 года назад

Seafoam, BG, CRC, X66P, etc. are all basically the same make up. Ford has release bulletins that is will void warranty on any ford GDI engines, if you do this treatment to your gdi engine. These are safe with carbureted or port injection engines as the coking deposits are the "soft carbon" and very little to loosen and expel. GDI engines the valves run far hotter with no fuel touching them any longer to cool and clean them, so when used, these absorb into the deposits causing them to swell and expand and break loose a portion and most is then expelled out the exhaust where it makes contact with the catalytic converters and clog's and/or causes damage from the cooling shock of this solvent hitting the catalyst honey comb material when it is up to temp. The real damage though is from the smaller particles forced down between the pistons and cylinder walls as it can be as hard and abrasive as sand. That is never good as the scratches/scouring left allows even greater blow-by and oil consumption. We also see a high incidence of rod bearings failing shortly afterwards if oil and filter are not immediately changed to remove the solvent and particulate matter forced into the crankcase. Now on port injection engines, these have been and can be used safely, but they do not have intake valve coking issues like GDI engines.

@richardbudd5334 Год назад

He's doing this on a 4 cylinder engine. Completely different manifold from a V8

@thatmexicanguy89 2 месяца назад

How long did you buy the hose and what is the diameter ?

@joelrodriguez7038 3 года назад

At how many miles you do this

@danielkyt 6 лет назад

What is the I.D of the hose ?

@odinsonthorhammer1 3 года назад

What is heat soak?

@inthemusic0075 4 года назад

What is size hose?

@SCUBA_5teve 4 года назад

Any idea how to do this on a ‘17 Accord Hybrid? You cannot “rev” the engine like a normal car. Plus there is no tachometer.

@TheOzthewiz 4 года назад

The hybrid does not use a GDI engine, an Atkinson cycle engine is used instead!

@onlycodered 3 года назад

I hope you brought it up to operating temp before doing this. It's the first step in the instructions. :)

@mikethompson3534 3 года назад

What is the diameter of that hose Thanks

@marcosl1983 Год назад

What size is that hose

@vernonkaris1524 Год назад

Hi sir what size is the learhose

@stevenrodriguez4550 2 года назад

Do you use the whole bottle

@jeffchen67 2 года назад

I heard people mentioning about do this cleaning just before an oil change, have you done it this way? Thanks!

@SGT_O Год назад

Yes, This should be done just before an oil change.

@lukha225 6 лет назад

What about spray through PCV hose? This would work too.

@ericrollins8960 5 лет назад

Asid Mohammad manual trans autos seem to idle lower

@chrismannmann4374 Год назад

THE SECOND HOLE FOR THE HOOD STAND IS GREAT TO KNOW. WISH I KNEW SOONER

@MrPuroMichoacan13 5 лет назад

Is there anyway to just disconnect the PCV and let it vent to atmosphere instead letting the blowback gases into the intake manifold?

@bobbydacer 5 лет назад

Yes. It's called oil catch can. RU-vid it!

@josephpassero3718 5 лет назад

Also how much milegeison the car must have over25000 miles to try that

@thailandphra6555 5 лет назад

Bro can u do a video or show how to do this on a honda vezel.. ?? Where shall i inject this CRC on Honda vezel engine.. pls can u show me..

@mattbova1138 5 лет назад

spray it directly into the throttle body...that is better than going through a vacuum hose. it cleans the throttle body and also spreads the cleaner more evenly over the intake valves.

@zeus-io3hn 6 лет назад

hi, i have a check engine light. obd2 said it is my valve. now i have an issue in my hand lol. at idle engine is rough. can i still use your method to clean my valve( solve the problem) or do i need to remove the head and clean it. what happen if the carbon falls into the cylinder? will it damage my car? can i use carb cleaner instead? we do not have intake valve cleaner in asia.

@TheJmn1888 6 лет назад

Kito do you have a product there in Asia called SeaFoam they make a SeaFoam version of this can and straw as well. I have had good luck using both SeaFoam and the product used in this video. I would use a much shorter hose than was used in this video though. This probably was the reason he had so many lights come on.

@jameskoralewski3583 6 лет назад

No, no spray cleaner, including seafoam or other gasoline additives will fix your problem. The carbon must be mechanically removed from the head and intake valve to clear up the problem. $500 to your local dealer will be about right for them to mechanically clean the engine from the carbon. The permanent solution is to never buy another car that has GDI (Direct Fuel Injection) or has a timing belt instead of a timing chain, this is another $500 repair bill due every 100,000 miles or less.

@besmuriqi8757 4 года назад

thank you

@vikasabnave5070 5 лет назад

Can i use this on 9th gen v6 accord bcoz 9th gen v6 accords are PGM-FI injected.all other 9th gen 4cylinder models are directed injected.just wanted to be sure before using this.thanks

@9thGenAccord 5 лет назад

Yes you can use on either.

@vikasabnave5070 5 лет назад

thanks.just wanted to be sure

@ivanbulgarin7232 6 лет назад

I need to ask what happens with the carbon valve deposits , also can we see the valve before and after

@-MrRichBiker1967 5 лет назад

They go into the bottom of the engine that's why you have to change your oil

@ronmartin4320 3 года назад

Some of the carbon mixes with the oil and some goes out the exhaust, that is why you see the white smoke when using carbon cleaners.

@MrMarcel114 Год назад

The Honda accords standard transmission nice car 🔥

@ETangooo 6 лет назад

Hi, what are you thoughts are spirited driving like almost redlining your car to help burnt he carbon deposit off?

@9thGenAccord 6 лет назад

Sure its good but wont burn off the goop on the back of the intake valve.

@jameskoralewski3583 6 лет назад

Not a bad idea to help burn off the carbon, but a very bad idea to destroy your engine or get a lot of speeding tickets.

@serratedwarstep Год назад

Do what BG Induction Cleaning services do and use the map sensor port.

@kgbreviews35 5 лет назад

I got a code going off on my 17 accord P1401. Sometimes it's triggered and other times its not. I'm assuming cleaning it with this will solve my problem.

@Rickbearcat 4 года назад

You should assume nothing and have the code properly diagnosed.