Тёмный
No video :(

How to clean Oil Pan and Strainer| Reseal oil Pan| Toyota Vios| 1nzfe| DIY 

Sharpen the Blade TV
Подписаться 1,8 тыс.
Просмотров 20 тыс.
50% 1

How to clean Oil Pan and Strainer| Toyota Vios| DIY
Sinabay ko na sa change oil ang paglilinis.
Oil Pan and strainer cleaning
Sharpen the Blade TV Channel
‪@SharpentheBlade‬
#toyotavios #vios #oilpan #oilstrainer #toyota #diy

Опубликовано:

 

27 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 22   
@andrej_vu
@andrej_vu Месяц назад
If u dont have chemicals, the cheapest and still effective way to clean oil and sludge is to use washing detergent powder for clothes, just make sure u cleaned that gelatinous layer with water after oil cleaning
@SharpentheBlade
@SharpentheBlade Месяц назад
I prefer dishwashing liquid...thank for your suggestion.
@PaulieVideos
@PaulieVideos Год назад
I might need to do this. I bought a 1999 Lexus and immediately did an oil change but after that and some test driving a "Low oil pressure" light keeps popping up when car is warmed up and idling. When driving it's not showing up. The oil pan and the strainer could be filled with debris caused by irregular/neglected oil changes by previous owners.
@SharpentheBlade
@SharpentheBlade Год назад
yes brother, you are right. strainer might be clogged. oil might be having a hard time moving around.
@sanjayarayamajhi7704
@sanjayarayamajhi7704 Месяц назад
How did you fix it? I am having the same problem.
@PaulieVideos
@PaulieVideos Месяц назад
@@sanjayarayamajhi7704 I have some bad news. Once I opened the oil pan I found little pieces of metal. 2 crankshaft bearings were damaged but at least not seized and the crankshaft itself was still straight. I replaced all bearings that touch crankshaft and I also replaced oil pump for brand new one. After that car is running complete fine now on an eaton supercharger for past year. I also use the regular 5W30 oil, changing for higher viscosity only delayed the time until "Low oil pressure" light came on. Good news is I did not have to remove the engine from the engine bay, all of this can be done from the bottom once the oil pan is removed. I suspect this was caused by too long intervals between oil changes, this is why you change oil AT LEAST every 10K km.
@SharpentheBlade
@SharpentheBlade Месяц назад
Hey man, thanks for the update! Good thing you are able to fix it before it get worse. Can't imagine the the hassle if you needed to remove the engine. Good thing all is possible just doing it from the bottom.
@arthurstone8664
@arthurstone8664 Год назад
How many hours before starting up the car? I think the gasket maker is not that fast drying.
@SharpentheBlade
@SharpentheBlade Год назад
I did it late afternoon then used it the next day. Worked well. same thing for the transmission pan.
@subzero9355
@subzero9355 Год назад
sir , kahit anu higpit dyan ng bolt or kelangan mas maganda gumamit ng torque wrench?
@SharpentheBlade
@SharpentheBlade Год назад
Better if may torque wrench. If wala, pede higpit na isang kamay lang hanggang dulo na may resistance. wag sobra na pirat na ang gasket.
@axenz1
@axenz1 8 месяцев назад
Owh no, I just do it last week, mine , I don't see any strainer gasket when removing it..only silicone gasket.. I just put it with silicone gasket..
@SharpentheBlade
@SharpentheBlade 8 месяцев назад
I see...maybe just stick to proper interval of oil change to lessen your worries.
@axenz1
@axenz1 8 месяцев назад
@@SharpentheBlade Tq 👍👍
@edstonpesito9199
@edstonpesito9199 2 года назад
Sir, meron ba talagang oil pan gasket 'yan o sapat na yung silicone gasket maker? :-)
@SharpentheBlade
@SharpentheBlade 2 года назад
Good day sir, wala po rubber gasket talaga yan. Need talaga lagyan ng silicone. Sa AT transmission pan may rubber gasket, Pero nagleak yung sa akin kaya silicon na lang din nilagay ko.
@edstonpesito9199
@edstonpesito9199 2 года назад
@@SharpentheBlade Thanks, sir!
@SharpentheBlade
@SharpentheBlade 2 года назад
@@edstonpesito9199 np. Stay sharp and subscribe.
@arseniong7940
@arseniong7940 8 месяцев назад
Boss pati ba strainer llagyan din ng silicon?? Ty po
@SharpentheBlade
@SharpentheBlade 8 месяцев назад
No need po. Yung pan lang po mismo.
Далее
Cute kitty gadgets 💛
00:24
Просмотров 14 млн
What is the Function of Oil Strainer?
8:25
Просмотров 1,8 тыс.
How To Clean Oil Pan and Pickup Tube
5:42
Просмотров 75 тыс.
How to SUPER CLEAN your Engine Bay
21:58
Просмотров 51 млн
Pulling to PERFECTION! | Getting Glassed!
12:56
Просмотров 6 млн
Cute kitty gadgets 💛
00:24
Просмотров 14 млн