How to Clean the printhead DX5

Подписаться 488

Просмотров 7 тыс.

50% 1

This video is to introduce how to clean the printhead-EPSON DX5.
check the product on the website www.uniprintcn.com/epson-dx5-...
💡 Further information or questions. Welcome to contact!
📩 Email: lily@uniprintcn.com
🔗 Website: www.uniprintcn.com
📱 WhatsApp: 86-159 5748 1803
#printhead #inkjetprinter
0:00 Use a syringe filled with a special cleaning solution to clean Printhead 8channels nozzles
2:30 Use protection liquid to fill the printhead nozzle

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@waone3620 2 года назад

I want to ask,, I did flushing on the yellow nozzle pole but why did the cleaner liquid come out on the black nozzle and can it still be fixed, I used an Epson L1800 printer.

@UniPrintcn 2 года назад

Nozzles are perforated. not possible to be fixed

@suatozcokmez736 9 месяцев назад

I did the same thing to clean the nozzles but after the cleaning process there are no more colors. The test print has become very bad. I spoke to a technician on the phone and sent him videos of what it looks like. He says that the print head has to be replaced because it is defective . can you possibly help?

@richardkopikats6314 7 месяцев назад

My dx 7 just leaks /drips ..short clean works perfectly ..after 1 print , leaks and drips white ink

@luismastronardi3733 4 месяца назад

I did some pressure but only got some drops, not a vertical rain, I am afraid of breaking if I apply more pressure, how much resistance should I expect when pressing?

@UniPrintcn 4 месяца назад

if you have a capping, suck down from the capping tube. (capping take out to seal up nozzles). so the pressure is more evenly. for press strength, is difficult to tell.

@ayeshasangatras6047 9 месяцев назад

I flush on my 4 white nozzle but liquid not come from head... what we do White at a time 4 nozzle not pri ti ng

@UniPrintcn 9 месяцев назад

after cleaning, there's motion of flash jet. if no inks from fash jet. the head is dead. change new printhead

@RaselMolla Год назад

may i do clean ownly?

@UniPrintcn Год назад

what's this question about? do you not sure about how to do?

@The27czoko 2 года назад

Which liquid do you use?

@UniPrintcn 2 года назад

there's a clean flush, especially for Epson head.

@UniPrintcn 2 года назад

when you don't have clean flush, you can use distilled water as well. for water-based ink used head.

@rebranddesign165 2 года назад

For eco solvent Dx5 which cleaning materials i can use

@artland1076 Год назад

@@UniPrintcn can we use solvent to clean Dx5 head?

@UniPrintcn Год назад

@@artland1076 it depends on your DX5 Type. if the model is the golden surface model which both works for oil base ink and water base ink. and printer used solvent ink, then you can use solvent cleanser. but if you used water base ink. then you can not use a solvent cleanser