How to Clean Your 3rd Gen Toyota Tacoma MAF Mass Airflow Sensor | VLOG #46

Подписаться 3,2 тыс.

Просмотров 13 тыс.

50% 1

This is a DIY video on cleaning your vehicle's MAF (Mass Air Flow Sensor). The MAF Sensor is a sensor used to determine the mass flow rate of air into your vehicle's engine. A dirty MAF Sensor will throw off information being fed to your ECU and during acceleration, you will experience engine hesitations or sudden jerking motions. This video shows how easy it is to do this project, specifically on a 2019 Toyota Tacoma TRD Pro.
Product Link:
CRC SensorKleen Mass Air Flow Sensor Cleaner: www.canadiantire.ca/en/pdp/cr...
Thanks for tuning in and see you on my next video!
Alex (Tacoma mod XELA)
DISCLAIMER:
I do not endorse nor am I compensated by the companies of the products that I install or the tools that I use. The sole purpose of my videos is to show you my installation approach and share ideas that I have. I am not a professional or an expert in these subject matters but rather, just self-taught. The information that I share in my videos are from my personal experiences and personal opinions, researched materials from manuals or internet documents, and from blogs or forums that may not be 100% accurate. Please do your own diligence to ensure correct product fitment when purchasing via any links that I may provide by verifying with manufacturer or dealer. I am not responsible for information provided here that may cause any damages or financial loss. Changes, omissions or additions maybe performed without notification and I reserve the right to make these changes without notice or obligation.

Авто/Мото

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@MrCTBurke1 10 месяцев назад

Thanks. That was very clear.

@modXELA 10 месяцев назад

Thanks for tuning in MrCTBurke!

@christophermartinez5314 2 года назад

Excellent video

@modXELA 2 года назад

Thanks Christopher!

@eh2341 2 года назад

I had never thought of cleaning the MAF sensor or seen the MAF cleaner. Thanks for a pre-winter maintenance idea. One thought is, I noticed what looks like a rubber O ring on the sensor. I'm thinking a touch of silicone grease on the O ring would be good to keep it in good shape. Thanks, again, for a good idea.

@modXELA 2 года назад

Hey Eric H... yes, that's a very good point on the o-ring gasket. It's definitely something that I'll do next time around... thanks for tuning in!

@teddymuscio7419 2 года назад

Hi Alex change your oil every 5000km if u change your own oil. Try not to change your oil 8000 or 10000km. In the future your engine might burn oil. The mass air sensor u can clean it ever oil change or every couple oil changes. I have a 2017 Tacoma trd sport and i have already 265000km on my truck and i change the oil every 5000km. And it still runs good. Great video 👍

@teddymuscio7419 2 года назад

If your going to wash the engine try using spray nine on the engine its an excellent degreaser

@modXELA 2 года назад

@@teddymuscio7419 will definitely look into this, thanks for suggesting! Have you ever tried P21S Total? I've never used it but I'm hearing good reviews.

@teddymuscio7419 2 года назад

I never heard of that product. I used super clean not the foam but the spray bottle from Canadian tire and it leaves white marks

@modXELA 2 года назад

Hey Teddy! Every 5k even with synthetic oil and synthetic oil filter? Toyota is recommending to change every 16,000 kms when using synthetic but I like your suggestion. With my Hondas, I do it every 8000.

@teddymuscio7419 2 года назад

One more thing alex if your engine is abit dusty and u dont want to wash it. U can use tire foam from Canadian tire. And u can spray the entire engine bay and walk away. It will take off the dirt away. Will leave anice shine but and oily shine. U can also use tire foam on your wheel wells if there dirty just spary and walk away they will look like new. U might have to do it twice if there very dirty.

@whitetiger8652 5 месяцев назад

I unplugged my sensor the other day and it set a check engine light that eventually went away. Thanks.

@ftwbreeze 2 года назад

Hello Alex. I'm not ready to clean ours just yet, 30K easy road only miles. Good info though, thank you!

@modXELA 2 года назад

Hey Breeze Rides! Only reason why I did mine with only 16k kms on my truck is because I had the OVTune done about 3 months ago and we've tried 4 different tunes now but my fuel consumption is still at 20.5L/100 kms for normal driving and 28L/100 kms when towing my travel trailer. I'm thinking my MAF sensor maybe dirty so I hope this makes a difference. Thanks and nice chatting with you as always, cheers my friend!

@jamesdean4972 2 года назад

@@modXELA I’m at 46k miles on a 2019 trd off road that goes deep off-road 3-5 times per year. Going to do this now with the MAF cleaner

@modXELA 2 года назад

@@jamesdean4972 yes, it's an easy DIY maintenance... thanks for tuning in!

@ugnut011 4 месяца назад

Thanks for the video! Would disconnecting the batter be beneficial at all, either preventing an engine code or something else?

@modXELA 4 месяца назад

Not really necessary as long as vehicle is not on.

@fogduker3131 Год назад

What tires and wheels are on your truck size and make are you running spacers or what is wheel offset 🤔 thanks looks good

@modXELA Год назад

Hey fogduker3131... sorry for the late reply, you can check out my channel for other videos on the tire, wheel and spacer installs but anyway, I have the Nitto Ridge Grappler 285/70R17 (33") tires, RTX Baja Offroad 17"x9" 0-offset wheels and KSP 1.25" spacers. Check out these links: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DCAAkN1qo40.html for the tires/rims and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5l79K45dKMY.html for the spacers or www.youtube.com/@modXELA/videos for the rest of my mods/installs.

@cidpusa700 Год назад

You sprayed on the resistor , the sensor is inside the holes

@modXELA Год назад

Thanks for your input.

@muda5375 2 года назад

Can i use contact cleaner to clean the sensor?

@modXELA 2 года назад

Hey Muda, great question! While many people say that there's no difference between the MAF sensor and electrical cleaner, I'm sure there are some differences in the chemical composition. Would you use dish soap to wash your car? I'm sure it's ok but I don't want to find out 2 years down the line that it has a harmful effect. $10 MAF sensor cleaner is not much to fork out for a $70k truck so I won't take the risk. I hope this helps. Thanks for tuning in my friend!

@seagraverider Год назад

How often should this be done?

@modXELA Год назад

Sorry for the late reply seagraverider, I've been away and traveling for work. Anyway, this depends. If you just do regular driving on paved roads, once/yr would be sufficient. However if you do offroading with plenty of dust, I would suggest at least 2x to 3x/year but you can make a judgement call and adjust that accordingly.