How to Clear a Fault on a PLC 

He is clear when he speaks and ready to rock and roll, I watched other videos and I can hardly understand what are they talking about.

Awesome vid man!! Thanks for upload!

very nice tutorials. thank you sir.

i love how he say's that he's ready to rock and roll :)

Taking a PLC class and really need to learn how to troubleshoot these controllers. Your videos rock! 🤘

Very good explanation and easy to understand.

Thanks for your valuable information, I was facing same issue in last 3 months. I have seen this video and solved the issue. thankyou so much sir. 🙏

Thank you great video

Hi sir micrologix 1200 shown fault indication... how to solved this problem... Thank you

Thanks a lot dear sir

good videos

Sir how to fix B&R X2X network fault

my plc is only shown power led and input leds and not working what to do?

Specially help in night shift 😅👍👍👍 so true

how to contact plc

Hello I have this fault on a plc micrologix 1400 : Major error s:6 = 2Bh. Me and 3 other colleagues have spent hours and hours trying to fix it and nothing works. The fault indicator flashes red. Every time we upload a program to the plc and we want to go to run mode it goes into fault. We have loaded a basic program and nothing works.

Hello Klettetech I was trying to make a simple circuit on Rs Logic Micro that contain Three Inputs and One output. First input that will jog the machine second input will start the machine and will latch it and third input is for stop the machine. In first rung I put input Jog with Normally open contact and output. In second Rung I put input start with Normally open contact. And stop input with Normally close contact. And same output as first rung with same address. Now if I toggle bit of Jog it would not work however it is working in second rung as it should be. I also used the bits now it will jog but will not start the output in second rung. Can you please help me to solve this Problem. Thanks.

how to fixed systembits error

Are you communicating with the PLC through ethernet?

Can there be any other type of faults in PLC?

Did u have to plug a cable into it to connect to it

Hello i need need need