it actually works every guides were like going crazy with their guides and all i needed to do was change 1_3 to 1_4 something none of them sayed it's always the low quality videos that help you the most(this isn't a hate you're awsome)
can you help me? I have a spanish version. The game perceives the control but the directions doesn't works correctly (down and up buttons are on the sticks and the directional pads only works on left and right. I try to use x360 for change the buttons but it doesn't works either.
If you play on steam, try disabling the controller for the game on steam or you can close steam completely by exiting the steam client from you task manager. Reconfigured x360 in the game directory like I did in the video and launch the game without opening steam. Let me know how it goes.
Mostly this happens when the analog is not activated when playing the game. Try the configuration with the analog activated which is mostly indicated by the red light in the middle of a pc controller and leave it on whiles in the game. Try to play and see, the Right analog should act like a camera looking only up or down.
I have done all the steps in the video, the controller works fine in the app but not in the game :// I didn't get an error message or anything, does this work with ps3 controllers ?
There must be something missing. Are you using the older or newer version of x360ce. If you are using the new version, try using the 32 bit older version.
@@virtualarc3029 It's fine I found out what the issue was, all I needed to do was to set up my controller again after launching the game and it worked. Thanks anyway ^^
O meu dá erro assim que eu coloco em auto e depois quando tento configurar aparece o erro na, tela toda vez que eu configuro um botão dis que a dll não foi encontrada algo assim.poderia me ajudar?
vá para as configurações do jogo e dê uma olhada nos arquivos xinput. agora verifique a última caixa com 32 bits anexada a ela. isso criará o arquivo dll. em seguida, salve e tente iniciar o jogo.
@@virtualarc3029 there’s hollow_knight_data and MonoBleedingEdge in there, I tried looking on my program files (x86) like you did and can’t find anything
Use the older version of x360ce_×86 which compatible with the game, then follow the video. The newer version is kind of had to configure and is full of bugs
@@virtualarc3029 hey first thanks for answering, appreciate it. Even when I get the buttons to work (except for the trigger 7 8 won't work I don't know why.) in hollow knight my controller will get detected but I need to press a button like 6 or 7 times to get work. I really don't know what I did wrong honestly. Every other game works so fine for me
OK. First check in the options tab and make sure enable xinput is checked. Then go to advanced tab for the controller you are using and try adjusting the left and right trigger dead zones. Try them at 0% then 100%. If it doesn't work, try putting the dead zones mid way to see. Not sure if this will work but its better to try and see.
@@virtualarc3029 ok I'll check it when I'm back tomorrow.. Thanks. I'm using a Nintendo switch pro controller or a ps4 controller both tried wired. For my pro con I use better joy it's similar to ds4 windows and simulates ur Xbox 360 controller. Without it the x360 won't accept any of my controller is it normal? Do u use ds4 windows or something?
now i got a Error "Access to path C:/ProgramData/X360CE/x30ce.Settings.xml" is denied :D ill give it up and refund the game but thanks bro for your help
it works for me but not very well like i can only walk with dpad and i cant look up and down with dpad and i need to look up and down with the shocks and i cant play with it so i need to still play with keyboard
Try reconfiguring the dpad and left analog stick in x360ce. It gets mixed up sometimes. Use the record function in the drop menu for configuring the keys to configure it.
If you have you can go to the game settings tab in the app, click on the add option in that tab and select your game from the game directory then after which click on synchronize in the bottom left corner and then save. You will hear a chime to indicate it worked when you start the game.
Try closing x360ce, delete the direct input file you changed from 1_3 to 1_4, then relaunch x360ce to create it again, then change xinput again from 3 to 4.
Make sure you are using the right version of x360ce for the game which is in the case of this game is the 32 bit version of x360ce. Launch as administrator and the application will ask to create the dollar file. If it doesn't, then go to game setting in x360ce and click on the game exe then click on the 32 bit version of xinpit files 1.4 . That will create the dll file.
for those who still can't use it, just install for all game type, then open virtual device, install vigem bus and it's done. at least that's how i was able to do it. also, add hollow knight.exe to the game list. do reply to this message if you have problem, I'll try to help
@@sla22345 sorry if I can't help much I only able to play like a few hours and then smth went wrong but I hope your's is ok. So, for the game list, find the 'add game' button on top right corner of the emulator. Click it, and then, search for hollow knight.exe in your folder. Leave the emulator open while playing, if not, it won't run.
@@virtualarc3029 Oh, no no! There is nothing wrong with your video, I just wanted to say that the last step was what fixed it for me ^^ Sorry for that, I thought it couldn't be read otherwise
i can send team cherry that your`re playing a free illegal version of hollow knight from game trex ,stop and buy the real version on steam.They spend lots of time into that game and they deserve the money STOP OUR BUY THE REAL VERSION ON STEAM
Well, even though this might be a bit tedious, you gotta admit the PC does provide a wider variety of games than most consoles. And if you are a person obsessed with game like I am, I think it would be in your favour to play on PC, especially now that most console games can be emulated on PC. But preference still has the upper hand so we are all free to chose what we prefer.
@@virtualarc3029 Never mind that. I already spent $2,500 on my PC to leave consoles. But anyways I just toggled the beta version of the controller and it worked without 360ce. But the one problem Im having is that it disconnects the controller randomly and then i have to press start to fix it. Will this work with the GOG version of the game? I am trying it right now.
ok so i tried doing what u told me in the video to do and it didnt work. I was playing wirelessly and i guess the only fix is to have my controller wired at all times.
OK, I don't know the version you are using but if you are using the x360ce_x86, you should be able to configure the game. Just make sure the OS you are playing on recognizes the controller before you run x360ce. You can go to the game setting tab and see if the x360ce exe file is checked. Save and launch the game and you will hear a sound before the title screen.
@@virtualarc3029 I tried with the same version as you. But it keeps shutting and opening by itself on my computer. Imma just buy a 360 controller I guess...
I keep getting this error message : Failed to load 'xinput1_3.dll' System.ComponentModel.Win32Exception (0x80004005): le module spécifié est introuvable (That's french for "the specified module can't be found" or something) Maybe that's the cause? Also, although I use the same version as you, my pictures of the 360 controller aren't colored as yours, but it's all grey. And when I try testing the controller on this tab (controller 1 - General) there's no reaction... Only when I go to the "USB Gamepad" tab that pressing any button on my controller triggers a response
Am not really sure what to say. But you could try the steam app for configuration your game control. Don't know if it will work there's no harm in trying.
