How to Connect Your NT1 5th Generation to an Interface or Computer

Подписаться 163 тыс.

Просмотров 49 тыс.

50% 1

In this video, Julian takes you through how to connect your NT1 5th Generation to your computer using an audio interface via XLR and directly to the computer using the digital USB output.
NT1 5th Generation User Guide: rode.com/en/user-guides/nt1-5...
How to Use 32-Bit Float Recording on the NT1 5th Generation: • How to Record 32-bit F...
How to Monitor Your Audio on the NT1 5th Generation: • How to Monitor Your Au...
How to use DSP on the NT1 5th Generation: • How to Use the NT1 5th...
NT15th Generation ASIO Driver for Windows: update.rode.com/nt1_5_asio/RO...

Кино

Опубликовано:

27 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 105

@theBearIsEvil 6 месяцев назад

Thank you for keeping it simple 👏

@contentfaithrecords 10 месяцев назад

Great instructions! Works perfect when connecting to my laptop!

@rodemic 10 месяцев назад

That's awesome to hear! 🙌 Good luck on your NT1 journey, and welcome to the family 👏

@VolkerundWallyMusic Год назад

Very well done,

@TheSuperChannel 8 месяцев назад

I agree with all the positive reviews of this video share, Not only was it quick, concise and to the point, the voice is friendly, smooth, and personable with the right amount of professionalism. This was much appreciated by another fellow Film professional. Kudos and again thanks for your time.

@rodemic 8 месяцев назад

We appreciate the kind words, @TheSuperChannel! Julian makes it easy for us 🥰

@DavidBrackett385 10 месяцев назад

If I’m going usb into Mac using audacity how does the onboard dsp in the mic work? Does it save the configurations until you go into rode connect again and manipulate it?

@2girlstyrick 3 месяца назад

thx this realy helped

@joips1108 6 месяцев назад

Hello! Which audio interface are you using? Im not sure which one to buy

@Mikee2022 Год назад

Rode is amazing

@claudettebeltman5371 3 месяца назад

Thank you for the clear expalantion. I still have one question, is it possible to use the mic on a Mac and GarageBand as recordingprograma?

@rodemic 3 месяца назад

Yes, it is @claudettebeltman5371 🤠

@azucenazhou Год назад

Thank you for the video. Can I use the cable with an adapter usb c to usb 3 instead of another cable? In that case, should I get usb or usb otg?

@ritasalame31 11 месяцев назад

Is it possible?

@fabricejaouen378 6 месяцев назад

I'm using it with its usb-c cable connected with a Female-C to male-A USB3 adaptor. Works perfectly. They say you can use any good quality USBC to USBA USB2 cable.

@ashboii7658 11 месяцев назад

I got this mic, I have usb a to a cable and an attachment at the end that makes it usb c so I can plug into the mic. However once plugged in the mic doesn’t show up in my inputs. I even downloaded the drivers, and my windows is up to date but still nothing. And then I tried using my Mac and used the default usb c to c cable provided and while the mic was now detected… I’m unable to select in my DAW (fl studio)

@rodemic 11 месяцев назад

Hey there, we recommend using the included cable as other cables may not be the right spec to work with the NT1 5th Generation. If you're still experiencing issues, we recommend chatting to our friendly support team here: rode.com/en/support/contact

@gazaini 4 месяца назад

i confuse to connect them on studio one, with focusrite as output, when i choose the interface of rode i can monitor output even that i change the setting on control panel still its just my voice could record without monitoring, or i can hear music but cant record/detect my voice except only way to do this by xrl , so i cant get any - 32 bit (float) on studio one ? or i missing something ?

@rodemic 4 месяца назад

Hey there @gazaini - sorry to hear you're having issues monitoring your NT1 5th Generation's output. We'd recommend getting in touch with our support team here - they'll be able to help you out: rode.com/en/support/contact

@gazaini 4 месяца назад

@@rodemic alright

@tanaynarayan 15 дней назад

Thank you for your quick and precise video. However, please do let me know if I need phantom power enabled audio interface while using USB connectivity ? Which sound output is better XLR with phantom power audio interface or direct USB connectivity with computer/mobile ? Does the mic has built in phantom power for USB connectivity ? Thank you in advance.

@rodemic 14 дней назад

Phantom power will be needed for the NT1 5th Gen. While the sound signature remains the same with both connection types, USB-C connectivity comes with the added feature of 32-bit float!

@tanaynarayan 14 дней назад

@@rodemic thank you for your response. Does USB C connectivity need phantom power audio interface ?

@tanaynarayan 8 дней назад

I tried to connect the microphone directly to my mobile device C port (as I do with my Maono USB mic.) but it didn't work as we have smule and other singing apps on mobile which makes it easy to record. Does this only work with laptop C port and not with mobile device?

@LouJefe 2 месяца назад

Quick question can you connect the rode NT1 A to a computer 💻 using USB adapter. Bc I saw one ☝️ on Internet but just wanted to be sure bf I order it.

@rodemic 2 месяца назад

We'd recommend a high quality interface such as the AI-1: rode.com/en/interfaces-and-mixers/ai-series/ai-1 rather than the (often lower quality) preamps found in smaller adaptors and such.

@LouJefe 2 месяца назад

@@rodemic I just ordered the 5th gen. Thanks for the reply

@vfpaintjobs 3 месяца назад

I have a Rockville power Gig RPG 123k. Can I just plug it straight into it ? Because I'm not getting any sound ,and does it have an off /on switch ?

@rodemic 3 месяца назад

Hey there, the NT1 5th Generation uses 48V phantom power to operate, so you'll need an amp, mixer, or other interface which can supply 48V phantom power.

@pabloray2562 7 месяцев назад

will plugging my studio headphones into my computer sound just as good as plugging it into my amp? because my amp sounds very very good with my headphones plugged into it but I don’t want the extra wires from the amp

@rodemic 7 месяцев назад

That really depends on what type of amp you're using and what your expectations are.

@a.n.tmusic6852 2 месяца назад

Does it work on fl studio windows?

@jhosue365 6 месяцев назад

Is it normal to increase my microphone db to 50 or there is not enough power? because I feel like I lose sound quality if I use it (I increase it in Rode connect), but if I don't use it then I can barely hear my vocals at 23db (I'm using USB C Cable) and I see other peoples youtube videos using less than I do. Please help me

@rodemic 6 месяцев назад

Hey there, usually our users will set their NT1s around 30db, but depending on how far you are from the mic, or how the tone of your voice, you may need to increase the gain. That's totally normal. The most important thing is that your NT1 sounds good- if it doesn't, let us know and we can help you out.

@too_saucy69 11 месяцев назад

when Im connecting my nta 1 to my m-track audio interface its indicators flicker a bit but the mic still doesnt detect any sound

@rodemic 11 месяцев назад

Hey there, that sounds like a tricky issue. Some troubleshooting steps could include trying other mics with your interface and trying to use your NT1 in USB mode. If the issue persists, you can get in contact with our friendly support team here: rode.com/en/support/contact

@nikandthepartz 2 месяца назад

Oh boy all I needed to do was turn the phantom power button on lollll thank you

@anam.3973 Год назад

the straight cord to computer is not working for me. I did all the steps you outlined here. please let me know what you suggest. thank you

@rodemic Год назад

We'd recommend checking out our User Guide, and if you're still stuck our Service Team are always there to help! User Guide: rode.com/en/user-guides/nt1-5th-generation Service contact: rode.com/contact

@user-llvgh5gnd7et 7 месяцев назад

After I bought the Rode NT1 5th, it became clear to me that the sound was very amplified. I checked the sound settings carefully and everything seemed fine, but the sound in all audio apps was still amplified and unclear. also I tried to install RODE CONNECT but it shows an error message that cannot be opened. Any Solution? MacOS Catalina

@rodemic 7 месяцев назад

It may help to adjust the volume of the mic in RØDE Central, by loading up the audio settings and lowering the gain. If that doesn't work, we'd recommend checking in with our support team here: rode.com/en/support/contact

@tim_robin 10 месяцев назад

Is there a way (e.g. ultra small interface) to connect it to my cellphone (via USB C)?

@rodemic 10 месяцев назад

It's not compatible with phones but if you use an audio interface which is capable of USB audio, such as the RØDECaster Pro II, then yes, you could.

@mohammedshahbazahmedrazvi2799 9 месяцев назад

Hey there. I am facing blue screen error on my windows when I am chaning the audio system as Nt1 5th generation (Float). Could anyone help me out where I am wrong?

@rodemic 9 месяцев назад

Hey Mohammed- this seems like a tough one, but our service team will be able to help you. Reach them at rode.com/en/support/contact, and make sure to include as much information as possible about your setup and when this error happens so they can help you.

@yysobell 5 месяцев назад

Ia it possible to use an usb-c to usb-a cable to connect the mic to a laptop? I would like to test it because i have some problems with the usb-c to usb-c connection ( already talked with the support team and they advised me to buy an audio interface ) so i would like to try a usb-c to usb-a connection first but i want to know if it’s something the mic supports before i spend money on the cable. Thank you 🙏🏻

@rodemic 5 месяцев назад

Hey there - yes the mic does support USB-C to USB-A cables. Good luck!

@yysobell 5 месяцев назад

@@rodemic Oh awesome thank you for the reply ☺️

@user-op7ku6mv1v 11 месяцев назад

Is it the same for windows system? I heard people saying it's hard to get ASIO working on windows system

@rodemic 11 месяцев назад

Hey there! We can confirm that yes, it does work on Windows- the ASIO driver can be found on our website here: rode.com/en/user-guides/nt1-5th-generation

@johnsandoval2851 5 дней назад

Hello I had bought a rode nt1 5th gen microphone and well this is my first microphone I’m purchasing I have no idea what I’m doing last time I ended up buying a rode tripod mic stand bc I thought it would hold up this mic i was surly mistaken could anyone recommend a mic stand that can sit on my desktop and hold the microphone in place?

@rodemic 5 дней назад

Great pickup! We do have the PSA1 and PSA1+ that could hold the NT1 5th Gen without any issues :)

@jeffsteitzer6005 10 месяцев назад

I'm having a problem that you might be able to help me with. I have set up my NT1 5th Gen mic using the USB connection but when I plug my headphones in I don't hear myself. My DAW is Audacity but when I tried to listen using Adobe Audition the result was the same--I can't hear myself while I am recording. What am I doing wrong?

@santoshpss 10 месяцев назад

Did you download their driver?

@jeffsteitzer6005 10 месяцев назад

@@santoshpss I did not. For some reason I thought you only needed to do that with a Windows system and I have a Mac.

@santoshpss 10 месяцев назад

@@jeffsteitzer6005 Wait you don't need a driver if you use MacOS.

@santoshpss 10 месяцев назад

@@jeffsteitzer6005 Maybe change the output device as your headphones in the driver settings in Adobe Audition. I'm sorry but I'm not that familiar with MacOS even though I have an iMac but it's a 2017 version and I rarely use it. I presumed you had a Windows PC.

@jeffsteitzer6005 10 месяцев назад

@@santoshpss that's what I thought.

@RemedyJLock 4 месяца назад

This confuses me because i have a 4th gen, plus theirs basically no tutorials plus i can't find out how to get my Mic to work in Audacity. I tried my sound settings with my mic and put audacity on the same ones. Idk what to do.

@rodemic 4 месяца назад

Hey there @RemedyJLock, we're sorry to hear that you're finding it hard to use your NT1 with Audacity. The only thing to really be aware of from our perspective is that the NT1 requires phantom power. Other than that, the NT1 functions like any other mic. The best way to solve your issue would be to try looking for help in the audacity community, asking the manufacturer of the audio interface that connects your device to your computer, or asking our support team here: rode.com/en/support/contact

@biswajitsadhu9635 11 месяцев назад

Which software will be better for recording With windows 11?

@rodemic 11 месяцев назад

Hey there- we've got a guide to recording in 32 bit float in our user guide which includes a list of compatible recording programs on PC: rode.com/en/user-guides/nt1-5th-generation#module_29

@funkybeatful 6 месяцев назад

Can I connect it to my iPad Pro for recording?

@rodemic 6 месяцев назад

Hi @funkybeatful, If your iPad has a USB-C output, it will work great with the NT1 5th Generation, but if it has a lightning port, it wont.

@santoshpss 10 месяцев назад

Can I use Ableton Live with 24 bit to record this Rode NT1 5th Gen mic using USB C to USB A connection to my Windows PC? I wanna use FlexASIO. Ordered from Amazon just now. It takes two days to deliver... :)

@rodemic 10 месяцев назад

Hey there, we can't confirm it's functionality with 3rd-party ASIO plugins, but there are many users who use this mic with Ableton everyday. If it's not working, try out the device's ASIO plugin here: rode.com/en/user-guides/nt1-5th-generation#section-asio-driver-for-windows

@santoshpss 10 месяцев назад

@@rodemic It works actually. :)

@DosaHoodIndianAsmr 5 месяцев назад

Hey can we use this mic on a phone, i have galaxy note 10+, if yes then how? I have recently purchased this and now it's not working on phone so feeling like returning it.

@rodemic 5 месяцев назад

Hey there, this mic should work with the Galaxy Note 10 as it works with USB-C phones (i.e. not phones with a Lightning port). We'd recommend testing it using the included cable from the box, and either the RØDE Central or RØDE Reporter app, as not all apps support external microphones, but ours definitely do. If your mic still isn't working, you can get in contact with our support team here: rode.com/en/support/contact

@DosaHoodIndianAsmr 5 месяцев назад

@@rodemic I tried both of them but nothing worked, I guess it requires more power

@mrsibo6894 11 месяцев назад

Hï, This Rode work Walloon focusrite interface ?

@rodemic 11 месяцев назад

Hey there- It will work with any audio interface that can supply 48v phantom power.

@BC-ENTERTAINMENT123 3 месяца назад

oh hello !how to connect dslr or camera ?

@rodemic 3 месяца назад

Unfortunately unless your camera accepts USB mics as an input or your camera supplies phantom power to the mic, its a little tricky to connect the two. We would recommend recording simultaneously into a computer via USB and syncing the video and audio in post.

@BC-ENTERTAINMENT123 16 дней назад

dicrect usb type c to computer dont work its fake claim its does not work

@dooma1800 5 месяцев назад

So it can be connected to phone ?

@rodemic 5 месяцев назад

If your phone has a USB-C port, yes, if it has a Lightning port, no.

@ad_onys1878 9 месяцев назад

I've got a Presonus io44 and I can't manage to make it work. Is there anybody able to help me?

@rodemic 9 месяцев назад

Hey there- feel free to get in contact with our support team for help! rode.com/en/support/contact

@kiarameza6068 6 месяцев назад

Uhhh what if i dont have headphones or an interface how can i hear the usb one😃☹️

@rodemic 6 месяцев назад

If you don't have headphones, you can use your speakers to monitor the sound which is being recorded on your NT1 5th Generation. But just be aware you may experience unwanted feedback while doing this!

@HydraCatGaming 29 дней назад

I need the rode ai 1 I bought one think g it would work right away. Dang lol 😅

@rodemic 29 дней назад

The NT1 5th Generation works with the digital USB connection and the XLR connection, if you have this model you don't immediately need to invest in an interface.

@user-li3hs6zf5i 7 месяцев назад

Chapters please

@Elder-Uriel 6 месяцев назад

👍

@biggesthaterontheinternet 6 месяцев назад

Mine didn't come with the thing you plugged in?

@joips1108 6 месяцев назад

Same problem here, did you buy it? Idk if this audio interface is necessary

@biggesthaterontheinternet 6 месяцев назад

@@joips1108 Yes unfortunately it's necessary. And it's like $200 :/

@joips1108 6 месяцев назад

@@biggesthaterontheinternet yes, I watched a video bout it, bought the focusrite scarlett 2i2 3rd gen for 120, I hope that goes alright. Really didn't expect those things to be that expensive tho fr

@rodemic 6 месяцев назад

Hey there folks. To correct the record, no, an interface isn't necessary to use the NT1 5th Generation with a computer running Windows or macOS. With these devices, you can plug the NT1 5th Generation straight in using the included USB cable. If your computer doesn't have a USB-C port, most USB-C to USB-A cables will work, such as the SC18. You can check out our user guide here for more information: rode.com/en/microphones/studio-condenser/nt1-5th-generation

@625bmx Год назад

Lost me at phantom power. Trying to connect this to my Sony ZV-E10

@rodemic Год назад

In this case, we'd recommend recording it directly to your computer via the USB cable and syncing in post

@Mohammad.Alkhawaja 11 месяцев назад

Needs a sound card؟

@rodemic 11 месяцев назад

Hey Mohammed, what do you mean?

@adityakaushal1139 10 месяцев назад

So the stand didn't come with my Mic and basically, you NEEED a stand if you dont want you USB wire to be bent. The least the company could've done was give me a stand, I literally paid 250 dollars for this and I can't even use the mic properly.

@glennblnco 7 месяцев назад

You need a dose of reality. You got what you paid for - a microphone. How you use a microphone properly is not their fault, but yours alone. I can imagine the shock on your face when you find out there are far more expensive mics that DO NOT come with stands or arms, nor do they come with XLR cables. Next time, do your research before deciding so you manage your expectations.

@revivalrifle 5 месяцев назад

Both of y’all boogers correct are correct 😆

@bennyhaibara7745 Месяц назад

I use an empty shoes box and I cut two holes in it (one on the top and one on the side) to let the wire pass through and then I layed the microphone on top of the box lol I don't have enough money to also buy a stand, so I managed with what I had at home ahahah