Тёмный

How to convert a Husqvarna 365 X Torq To A 372 X Torq. 

Wooly's World
Подписаться 11 тыс.
Просмотров 10 тыс.
50% 1

www.buymeacoff...
Gear That Wooly Recommends
Buy The Gear, Amazon Affiliate Links
Buying gear through my links will really help out my ability to make videos. It will not cost you any extra.
Cheers Wooly
Carhartt
Bartlett Jacket : amzn.to/3nv9xSa
Active Jackett : amzn.to/3hAHvRs
Axes :
Fiskars x 37 : amzn.to/2XsV1j1
Fiskars Splitting Hammer : amzn.to/3zd0NSS
Chainsaws and Stuff
Husky combi can : amzn.to/3hA0QC2
Husky technical helmet : amzn.to/3lIAvDt
Husqvarna classic helmet : amzn.to/3loxBn7
Husqvarna 435 ii chainsaw : amzn.to/2XsW02H
Meindl Chainsaw Boots, Wood Walker Pro : amzn.to/3CcE2jQ
Dewalt Power Tools
Combi kit : amzn.to/3ChonQu
Circular Saw : amzn.to/3CfuyEt
Jigsaw: amzn.to/39boujK
My Camera ,
Canon M50: amzn.to/3nASoqm
Dremel Rotary Tool : amzn.to/3EhG7wJ
Welcome to Wooly's World.
This is a little channel about my life and all the things I get up to. so, if you like Chainsaws, Bushcraft, camping, splitting wood, pina coladas, getting caught in the rain…………………………………………………………………………………………………….. no hang on that's a song.
It can get random at times but hey that's the way it goes.
Guys and Girls don't forget to Subscribe and click the bell icon and of course pop into the comments and say Whell., thanks, Wooly.
Guys and Girls, don’t forget to like and subscribe to wooly's world, and to hit that bell notification, and of course pop into the comments and say hello.
Frankensaw, Husqvarna 365 X torq, Husqvarna, Husqvarna chainsaw, frankensaw, chainsaw hack save your back, how to, power tools, how to basic, Husqvarna 435, Dremel chainsaw sharpener, Husqvarna 365, Husqvarna 365 x torq, Husqvarna 435 chainsaw, Husqvarna 435 x-torq, wooly’s world, sharpening a chainsaw with a Dremel, Husqvarna 365 x-torq, splitter wars 2020, Husqvarna 435 ii, chainsaw sharpening, ported chainsaw, cutting firewood, wooly’s world, condor, buffalo jacket, condor kukri, Coleman tent, Octagon 8, Carhartt jacket, Off Grid Small Cabin Build, Terävä Jääkäripuukko 110
HOW TO CONVERT A HUSQVARNA 365 X TORQ TO A 372 X TORQ
ok forgive me, im completely winging it here, going by what ive read online and a few youtube videos i decided to try this myself
Running a 24 inch Bar on the Frankensaw. Husqvarna 365 X torq,husqvarna,husqvarna chainsaw,frankensaw,chainsaw hack save your back,how to,power tools,how to basic,husqvarna 435,dremel chainsaw sharpener,husqvarna 365,husqvarna 365 x torq,husqvarna 435 chainsaw,husqvarna 435 x-torq,woolys world,sharpening a chainsaw with a dremel,husqvarna 365 x-torq,splitter wars 2020,husqvarna 435 ii,chainsaw sharpening,ported chainsaw,cutting firewood

Опубликовано:

 

5 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 86   
@behrensb1
@behrensb1 4 года назад
I have officially joined the Wool Pack! This video gave me the confidence to convert my 365. It went off without a hitch. Been wanting to do this for a few years now. Thanks Wooly!
@WoolysWorld
@WoolysWorld 4 года назад
sweet jebus man!!! im so proud of ya, and myself a wee bit!! make sure you tighten up all them bolts, ( i didnt) i need to see a video , well done
@behrensb1
@behrensb1 4 года назад
@@WoolysWorld I made sure the cylinder bolts were Gorilla tight, I also put some blue Loctite on to be safe. It's raining here, I'll let you know how she cuts soon!
@WoolysWorld
@WoolysWorld 4 года назад
@@behrensb1 brilliant
@WoolysWorld
@WoolysWorld 4 года назад
Now we just need full wrap bars
@behrensb1
@behrensb1 4 года назад
@@WoolysWorld you're a mind reader. Thats my next mod on my "372xp"
@markjoudrey7036
@markjoudrey7036 4 года назад
Chainsaw moding is like potato chips, you can't stop with just one.Awesome job have fun MJ
@WoolysWorld
@WoolysWorld 4 года назад
thanks man
@WoolysWorld
@WoolysWorld 4 года назад
I'm thinking of doing my exhaust now !! Lol
@tomwaldo9556
@tomwaldo9556 4 года назад
That looked pretty simple. Good video. Thanks.
@WoolysWorld
@WoolysWorld 4 года назад
It was! very simple, a great saw
@rossmillar9441
@rossmillar9441 Год назад
Did you need to remove the cylinder or did it just make it easier to get to the side covers of the transfer ports
@WoolysWorld
@WoolysWorld Год назад
I just made it easier
@davidolynyk1673
@davidolynyk1673 2 года назад
Outstanding! Next on the to-do list! Cheers!!
@WoolysWorld
@WoolysWorld 2 года назад
I'm not an expert , I just winged it , worked a treat, fantastic saw
@davidolynyk1673
@davidolynyk1673 2 года назад
Thats how the ol'boys did it. My previous saw was a 2100 husky, 99 cc. This is the runner up for sure, and lighter to boot!
@WoolysWorld
@WoolysWorld 2 года назад
Brilliant
4 года назад
Nice work, y prefer 365 xtorq original no modifications is running wery well cheers.
@WoolysWorld
@WoolysWorld 4 года назад
Cheers buddy,Thanks for watching, dont forget to like and subscribe, look forward to seeing you around
@charlesboston1
@charlesboston1 2 года назад
the difference is , one is a 65 cc saw , the other is a 72 cc saw ..... grinding on the ports will not change this
@WoolysWorld
@WoolysWorld 2 года назад
Cheers buddy
@theautisticarborist6846
@theautisticarborist6846 Год назад
That's the OE 365 SPECIAL 48MM and OE 372XP 50MM ! The 365 / 372 xtorq are both 50mm cylinders 70.7cc only difference is the transfer caps and tuning ! in the us market I think the 372XT also had the high top filter, double dawgs and occasionally a Full Wrap handle ! But in the UK / EU Markets the only difference is the transfer caps
@WoolysWorld
@WoolysWorld Год назад
I ground down the transfer ports
@theautisticarborist6846
@theautisticarborist6846 Год назад
@@WoolysWorld cool video, did you use sealant when you put the caps back on or did you manage to save the old o rings ?
@WoolysWorld
@WoolysWorld Год назад
I used the o rings , I didn't really know what I was doing
@AH-zc3xr
@AH-zc3xr 4 года назад
Wooley. Great job. Now you have the same power as a 372 x torq . Wooley make a video cutting timber with it.
@WoolysWorld
@WoolysWorld 4 года назад
thanks man, thats a video for tomorrow, too wet today
@AH-zc3xr
@AH-zc3xr 4 года назад
@@WoolysWorld wet day here in the Midlands also wooley. Did you get your hands on a 390 xp yet?😁
@WoolysWorld
@WoolysWorld 4 года назад
@@AH-zc3xr not yet, hopefully santa will be nice this year!! but i doubt it, i was looking at one in the saw shop today, piston had gone, damaged the cylinder, expensive fix
@AH-zc3xr
@AH-zc3xr 4 года назад
@@WoolysWorld.wooley I suppose about 300 I'd say.for a new cylinder piston and rings. You would have a new engine. Their 1200 new.
@celticwisdom.7430
@celticwisdom.7430 4 года назад
Its a Great saw wolly and I hope to be up and running on Facebook in the next few days. I am looking for a p51 pioneer if anyone out there can help me with getting one. Love watching you're videos wolly.
@WoolysWorld
@WoolysWorld 4 года назад
thanks man, hit me up when you get facebook sorted
@jamesphelan9565
@jamesphelan9565 4 года назад
Bud u should get a compressor for ur self and blow out ur saw before working on it make it job so much easier bud cant wait to see the results
@WoolysWorld
@WoolysWorld 4 года назад
Cheers man, been thinking that for awhile
@almcgee4739
@almcgee4739 4 года назад
You should change the sump oil just in case any filings got in 10w 50 oil and check the drain plug magnet for fillings
@WoolysWorld
@WoolysWorld 4 года назад
Quiet you!!
@leonardvirtue5753
@leonardvirtue5753 4 года назад
Mate!!!👏👏👏👍👍 well done!!!
@WoolysWorld
@WoolysWorld 4 года назад
thanks man
@tedjohn441
@tedjohn441 4 года назад
I saw other comments about open the exhaust anything you can do that is OK if you cut on public land in Ireland. Do to open the exhaust first get rid of spark arrester and gargle the opening. I am not that familiar with Husky' as I work on Stihl's more. I do have a few older Husky's. I am just more familiar with Stihl saws. Ted
@WoolysWorld
@WoolysWorld 4 года назад
thanks man
@WoolysWorld
@WoolysWorld 4 года назад
guys, turns out i forgot to tighten a few screws!!! doh im blaming fibro, anyhoo its pissing down today, ill get cutting some wood tomorrow
@WoolysWorld
@WoolysWorld 4 года назад
Cheers buddy
@bushleague3472
@bushleague3472 6 месяцев назад
Did you notice any difference in fuel consumption?
@WoolysWorld
@WoolysWorld 6 месяцев назад
Not at all
@bushleague3472
@bushleague3472 5 месяцев назад
@@WoolysWorld Any links to that muffler mod you did? I've put my saws to bed for the summer, may as well mod that 365 a little.
@WoolysWorld
@WoolysWorld 5 месяцев назад
@bushleague3472 sorry but I don't, someone made it for me and posted it over
@bushleague3472
@bushleague3472 5 месяцев назад
@@WoolysWorld I just did this mod, made some flared gill slits in the right side of the muffler, pulled the carb caps and re-tuned. That sure gave it some snap! It was a good saw stock, but it likes to be revved and the throttle response is a bit lazy. Nothing you cant learn to work with, but I think I'm going to like the saw a lot more now. I also just picked up a 565, which seems like a worthy successor.
@WoolysWorld
@WoolysWorld 5 месяцев назад
@bushleague3472 nice! The 5 series have been catching my eye recently
@solobushcraft1
@solobushcraft1 4 года назад
It works
@WoolysWorld
@WoolysWorld 4 года назад
it lives!!!!
@balanelgabriel3516
@balanelgabriel3516 4 года назад
After this conversion, carb has the factory set?
@WoolysWorld
@WoolysWorld 4 года назад
I never touched the carb
@balanelgabriel3516
@balanelgabriel3516 4 года назад
@@WoolysWorld But, after muffler mode is needed to adjust the carb? Sorry for my engleish.
@WoolysWorld
@WoolysWorld 4 года назад
I did a muffler mod
@balanelgabriel3516
@balanelgabriel3516 4 года назад
@@WoolysWorld You adjusted the carb after mufler mode?
@ez-g3090
@ez-g3090 2 года назад
The air filter is different on the 372
@WoolysWorld
@WoolysWorld 2 года назад
Yes it is
@scottbennett6494
@scottbennett6494 4 года назад
if ya go past 10 ya need to take boots off, if ya go past 20 be on lookout for the po po ( lol )
@WoolysWorld
@WoolysWorld 4 года назад
i have no idea what that means
@scottbennett6494
@scottbennett6494 4 года назад
@@WoolysWorld check with ironhorse or bellhopper on how. ( apparently it makes a big difference)
@WoolysWorld
@WoolysWorld 4 года назад
@@scottbennett6494 im still lost, sorry
@scottbennett6494
@scottbennett6494 4 года назад
@@WoolysWorld 10 fingers 10 toes if you go past that indecent exposure charge as something is hanging out
@WoolysWorld
@WoolysWorld 4 года назад
@@scottbennett6494 lol
@stevenbuckley1416
@stevenbuckley1416 4 года назад
👍
@WoolysWorld
@WoolysWorld 4 года назад
cheers buddy
@tedjohn441
@tedjohn441 4 года назад
Hi Wooly hope you are well!! If you want to do anything to your saw like put a big bore kit in it talk to ironhorsechainsaws on You Tube. H e does allot of work for Buckin billy. He is a very nice man his name is Harvey and will answer any of your question. You can comment on a video or e-mail him at ironhorsechainsaws@gmail.com Cheers Mate! Ted
@WoolysWorld
@WoolysWorld 4 года назад
cheers ted, im subbed to his channel, just going through his videos now to see if there is anything
@gerbutt
@gerbutt 4 года назад
Nice one dude :) You may need to retune it, see how it is when cutting. It’d benefit from an exhaust port job too 👍
@WoolysWorld
@WoolysWorld 4 года назад
Yeah, I just decided to go for it, simple enough once I figured out what I was doing
@WoolysWorld
@WoolysWorld 4 года назад
I need to go over it again, ports aren't sealed right
@gerbutt
@gerbutt 4 года назад
Yeah you’ve got to be careful of an air leak, it’ll make it seize! Looking forward to tomorrow’s vid 👍
@WoolysWorld
@WoolysWorld 4 года назад
@@gerbutt id forgot to tighten the screws on the head gasket!! all sorted now and cleaned up, pissing rain here so ill cut some tomorrow
@gerbutt
@gerbutt 4 года назад
Thank the lord of saws you noticed that dude 😀 Same here dude, it’s been chucking down all day and now the bottom of my road is in about a foot of water!
@stevenbuckley1416
@stevenbuckley1416 4 года назад
👍
@WoolysWorld
@WoolysWorld 4 года назад
cheers buddy
Далее
Пчёлы некроманты.
00:46
Просмотров 23 тыс.
Why Port your Chainsaw? - Husqvarna 365 Review
10:36
Просмотров 4,6 тыс.
Husqvarna 372 X Torq porting
37:08
Просмотров 8 тыс.
Husqvarna 365 X-Torq-ból 372 XP Házilag..
19:06
Просмотров 20 тыс.
Husqvarna 365  X-Torq Chainsaw 4 Year Review
7:24
Просмотров 11 тыс.